NO

RT
H

LEGEND :

SYMBOL ABBREVIATION DESIGNATION

EAD EXHAUST AIR DUCT

Supply Duct
SAD SUPPLY AIR DUCT

RAD RETURN AIR DUCT

FAD FRESH AIR DUCT Return Duct

REF-PIPES REFRIGERANT PIPE ( RETURN)

REF-PIPES REFRIGERANT PIPE ( SUPPLY )

FLEXIBLE DUCT
Exhaust Duct
I.U INDOOR UNIT

VD VOLUM DAMPER

SUPPLY FLOW BAR SIDWALL

REFRIGERENT
RETURN FLOW BAR SIDWALL
PIPE GAS
S.G SUPPLY GRILLE

R.G RETURN GRILLE

REFRIGERENT
SUPPLY FLOW BAR GRILLE
PIPE LIQUID
RETURN FLOW BAR GRILLE

THERMOSTAT

ROOF PACKAGE
Fresh Duct
EX.F EXHAUST FAN

HUMIDIFIER
Kitchen Exhaust
Duct
REVISION STATUS :

Note 1: REV DATE DESCRIPTION APPROVED

-The cassette fans in the bathrooms and showers have been replaced with a Note 4:
single inline fan due to the pre-existing Builder ’s Work. This alternative is
considered more efficient as the external static pressure from the basement to -The machine was relocated from the storage room 18 to the laundry area due
the upper levels will be better handled, ensuring improved system to a thick slab and limited space between the ceiling and the false ceiling. The
performance. design complies with the concept design.

-Feeding from the same machine for Storage Room 17 is difficult due to limited 1XS.G 8"X8"
-The supply air in DRIVER BATH 33 has been reduced to maintain negative 50 CFM
pressure inside the bathroom, preventing odors from escaping into adjacent space and long distance, affecting routing and static coverage. We suggest
adding a high-wall unit or leaving it as is. The return grille near the storage room N.C < 20
areas.
in the corridor creates negative pressure, pushing air outside and renewing the Air outlet P.D = .006 inches w.g
Note 3:
airflow. THROW = 1 M TO 1.8 M
There is a stove in this space that was not equipped with an exhaust hood in the
concept design. Accordingly, a hood has been added to address this
2XS.G 10"X10" SUPPLY AC requirement. 200x200 1XS.G 8"X8" 1XS.G 8"X8"
190 CFM 1XS.G 8"X8" Exhaust Air 155 CFM 105 CFM 1.3 TON 1XS.G 8"X8"
N.C < 20
Air outlet P.D = .016 inches w.g
65 CFM
N.C < 20
EXHAUST
4XE.G 8"X8"
75 CFM EACH
200x200
141.6 L/s
Exhaust Air 200x200
B.O.D=2865
200x200
1xR.G 8"X8"
155 CFM
1xR.G 8"X8"
105 CFM
FXMQ40PB
155 CFM
1xR.G 8"X8"
155 CFM
BUILDING KEY PLAN
THROW = 2.4 M TO 3.6 M Air outlet P.D = .014 inches w.g
THROW = 1.2 M TO 2.4 M
4XFLEX.D∅6"
N.C < 20
B.O.D=3030 Exhaust Air
B.O.D=2965
Exhaust Air
B.O.D=2865
N.C < 20
Air outlet P.D = .057 inches w.g
N.C < 20
Air outlet P.D = .025 inches w.g
V1 N.C < 20
Head Loss=.105 in.WC/100 ft
Air outlet P.D = .016 inches w.g THROW = 3.6 M TO 4.5 M THROW = 2.5 M TO 3.5 M 565 CFM Air outlet P.D = .057 inches w.g
5 Velocity=719 FPM
THROW = 3.6 M TO 4.5 M Note 5:

The hood and bathroom fan exhausts were relocated from the stairwell wall
outlets as the architect and structural engineer did not approve wall openings.
AW-ME-HVAC-102 250x200
122.7LAUNDRY
L/s
the white cirle on the wall refers to the old opens postions. 2XS.G 8"X8"

FXAQ20ARVM
150ø
WC WC 157.5 CFM
FXAQ20ARVM

70.8 L/sDRIVER BATH 200x200 Open above Supply Air

SHWR 188.8 L/s ceiling for return B.O.D=297519 N.C < 20
Exhaust Air
B.O.D=2888
EX.F-02 (INLINE)
33 300 CFM 32 150 Ф 30 EX.F-01 (INLINE)
400 CFM MAIDS GUEST LOUNGE Exhaust Air air same as Velocity=490 FPM 350x200
The cassette-type exhaust air fans are currently required to discharge 1.3 TON Air outlet P.D = .057 inches w.g
300x150 150 Ф 29 B.O.D=2875 supply duct size 250x150 266.7 L/s THROW = 3.6 M TO 4.5 M
89.7 L/s VD
EX.F-01 (INLINE)
400 CFM
Head Loss=.188 in.WC/100 ft
Velocity=764 FPM 3XVD Velocity=950 FPM 250x150 73.2 L/s Supply Air
STORAGE STORAGE contaminated air over long duct runs to the rooftop. However, these fans are not FXMQ40PBV1 1xR.G 12"X"12
Supply Air 22 Supply Air B.O.D=2975
B.O.D=3000 200x200 150 Ф
MAIDS LOUNGE 200x200
200x200
188.8 L/s
LINEN B.O.D=3000 Velocity=602 FPM designed to handle high external static pressure. As a result, they may not be able 565 CFM 315 CFM
N.C < 20
Head Loss=.036 in.WC/100 ft 188.8 L/s 188.8 L/s Head Loss=.038 in.WC/100 ft 18 17
Note 2: Exhaust Air
20 Air outlet P.D = .013 inches w.g
Velocity=417 FPM Exhaust Air 200x200 150 Ф
150x200
70.8 L/s 23
Exhaust Air
B.O.D=2820
B.O.D=2820
Velocity=402 FPM
to overcome the pressure losses in the ductwork, which can significantly impact
The unit has been relocated from DRIVER BATH 33 to the lounge due to B.O.D=2965 141.6 L/s Velocity=950 FPM
insufficient space to accommodate both the unit and the ductwork. Additionally,
300x200
179.3 L/s
Velocity=.17 FPM Exhaust Air
Exhaust Air
B.O.D=3030
Velocity=950 FPM their performance and result in unreliable or suboptimal operation.
the area contained existing ventilation and drainage ducts, which further Supply Air B.O.D=2875 150ø 150x150
Head Loss=.06 in.WC/100 ft T/A 100ø
constrained the available space. B.O.D=2975 Velocity=719 FPM 94.4 L/s 23.6 L/s 150x150
Head Loss=.061 in.WC/100 ft
Duct split into two MAID
Velocity=482 FPM BATH
Exhaust Air Supply Air 23.6 L/s 35.4 L/s
150 mm round duct 350x200
Velocity=613.5 FPM
VD to above embedded
on entry level wall for
2XVD
T/A
SHWR 28
200x200
188.8 L/s
THERMOSTAT B.O.D=2895
Head Loss=.3 in.WC/100 ft
B.O.D=3025
Head Loss=.016 in.WC/100 ft
Supply Air
B.O.D=2656
Exhaust Air
B.O.D=3020
250x150
94.4 L/s
266.7 L/s
Supply Air
both fans 200x100 Velocity=1018 FPM Velocity=215 FPM Head Loss=.391 in.WC/100 ft Return Air
31 Exhaust Air B.O.D=2975
Supply Air
B.O.D=3050 150 Ф
THERMOSTAT B.O.D=2820
T/A Duct split into two 150
Velocity=859 FPM B.O.D=3014
Velocity=520 FPM
Velocity=602 FPM
Velocity=950 FPM mm round duct to above
150ø embedded on entry level
THERMOSTAT
DRIVER LOUNGE
200x150 THERMOSTAT THERMOSTAT
35.4 L/s
Exhaust Air
wall for both fans
THERMOSTAT EX.F - 03
200x150 200x150 56.6 L/s B.O.D=2875 250x200 200 Ф
350x200 34 87.3 L/s 56.6 L/s Supply Air Head Loss=.52 in.WC/100 ft Supply Air
150 Ф
266.7 L/s Supply Air Supply Air B.O.D=3025 150x150 Velocity=383 FPM B.O.D=2975
Open above HALL
Supply Air B.O.D=3025 B.O.D=2838 Head Loss=.04 in.WC/100 ft 23.6 L/s ceiling for 150x100
EX.F-03 (CASSETTE)
B.O.D=2975 Velocity=595 FPM Velocity=386 FPM Velocity=386 FPM Supply Air return air same 14 75 CFM 23.6 L/s EX.F-02 (INLINE)
Head Loss=.045 in.WC/100 ft B.O.D=2813
THERMOSTAT Velocity=602 FPM THERMOSTAT Velocity=160 FPM
as supply duct
size
Supply Air
B.O.D=3006
VD VD 200x200
74.3 L/s
300 CFm
150x150
23.6 L/s 250x200 Velocity=257 FPM Supply Air
1XS.G 12"X8"
DRIVER BED DRIVER BED DRIVER BED MAID BED MAID BED MAID BED Supply Air Supply Air 200 CFM 250x150 B.O.D=2975 200x150
B.O.D=2812 B.O.D=2788 Head Loss=.032 in.WC/100 ft 141.6 L/s
N.C < 20 94.4 L/s
1.3 TON 36 35 27 26 25 24 Velocity=214 FPM
ELEVATOR Air outlet P.D = .016 inches w.g Supply Air VD Velocity=377 FPM Kitchen Exhaust Air
FXAQ20ARVM

FXAQ20ARVM

FXAQ20ARVM

FXAQ20ARVM

250x200 B.O.D=2945
FXAQ20ARVM

FXAQ20ARVM

JANITOR 150 Ф STAIR B.O.D=2980 200x200

FXMQ40PB 150 Ф
13
THROW = 2.4 M TO 3.7 M
1xS.G 8"X8" (BATH)
Velocity=520 FPM 118.0 L/s
Supply Air
74.3 L/s Head Loss=.217 in.WC/100 ft
Velocity=960 FPM
21 15 Supply Air
V1 THERMOSTAT
50 CFM
N.C < 20
B.O.D=2975
Head Loss=.043 in.WC/100 ft
B.O.D=2975

565 CFM Air outlet P.D = .006 inches w.g Velocity=482 FPM 150 mm take off to
round duct to above
THROW = 1 M TO 1.8 M
1xR.G 12"X8" 200 Ф
200 CFM
STORAGE
EX.F-03 (CASSETTE)
75 CFM 16

The cassette-type exhaust air fans are currently required to discharge

contaminated air over long duct runs to the rooftop. However, these fans are not
1XS.G 8"X8"
designed to handle high external static pressure. As a result, they may not be able 50 CFM
N.C < 20
to overcome the pressure losses in the ductwork, which can significantly impact Air outlet P.D = .006 inches w.g
THROW = 1 M TO 1.8 M
their performance and result in unreliable or suboptimal operation.

1XR.G 20"X8" SUPPLY AC 1XS.G 8"X8"

400 CFM 1XS.G 8"X8" 50 CFM
N.C < 20
Air outlet P.D = .019 inches w.g
120 CFM
N.C < 20
Air outlet P.D = .039 inches w.g
N.C < 20
Air outlet P.D = .006 inches w.g
THROW = 1 M TO 1.8 M
PROJECT :
THROW = 2.1 M TO 3 M

ALEISA FAMILY
RESIDENCES

01 BASEMENT LEVEL HVAC CLIENT :

1 1 : 100 ALEISA

MEP CONTRACTOR:

DRAWING TITLE :

01 BASEMENT LEVEL HVAC

Sheet Contents:

DRAWN DESIGN CHECKED SCALE DATE

As indicated
Author Checker
DRAWING. NO. REVISION

AW-ME-HVAC-100