Name of trainer:- ____________________Department:- Construction
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 1 Identify hand and power tools
Session Objectives:
At the end of this session the learners shall be able to:- Using construction hand and power tools Occupational health and
safety, Identifying Quality assurance requirements for company operations, Identifying Types of hand and power tools and
their functions, Recognizing Power source and access to power supply.
Nominal
Activities Contents Learning Methods
Duration
Introduction 1;00 hr Introduction to all outcomes lecture
Body 1.1 OHS requirements associated with the use of
2;00hr construction hand and power tools, and the workplace Lecture-discussion
environment, are adhered to throughout the work
1;00hr 1.2 Quality assurance requirements for company Lecture
operations are identified and adhered to
10;00hr 1.3 Types of hand and power tools and their functions Lecture-discussion
are identified
1.4 Power source(s), and access to power supply is
5: 00hr Lecture-discussion
recognized
Evaluation 40 min LAP test Individual Activity
Summary 20 min Wrap-up and Feedback Mentoring
YEKA INDUSTRIAL COLLAGE
session plan
Prepared by ____________________ checked by________________________
Date _________________ Date_____________________________
Signature _______________ signature __________
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 2 Select appropriate hand tools
Session Objectives:
At the end of this session the learners shall be able to
selecting Hand tools consistent with the job
checking hand tools for serviceability and safety
selecting equipment to hold, position or support material for hand tools application
Nominal
Activities Contents Learning Methods
Duration
Introduction Introduction to all outcomes lecture
Body 2.1. Hand tools are selected consistent with the
1:00hr needs of the job Lecture-discussion
2.2. Hand tools are checked for serviceability
and safety and any faults reported to
1:00hr supervisor in accordance with workplace discussion
requirements
2.3. Equipment is selected to hold, position or
1:00hr support material for hand tools application discussion
Evaluation 35mint Individual Activity
LAP test
Summary 25mint Wrap-up and Feedback Mentoring
YEKA INDUSTRIAL COLLEGE
session plan
Prepared by________________ checked by_____________________
Date _________________ Date___________________
Name of trainer:-________________________ Department:- Construction
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 3 Use appropriate hand tools
Session Objectives:
At the end of this session the learners shall be able to This learning guide is developed to provide you the
necessary information regarding the following content coverage and topics: locating and holding material
in position for hand tool application, Using hand tools safely and effectively according to their intended use,
locating safely hand tools when not in immediate use
Nominal
Activities Contents Learning Methods
Duration
Introduction Introduction to all outcomes lecture
Body 3.1. Material is located and held in position for
2:00hr hand tool application Lecture-discussion
3.2. Hand tools are safely and effectively used
2:00hr according to their intended use Lecture-discussion
3.3. Hand tools are safely located when not in
2:00hr Lecture-discussion
immediate use
Evaluation 40m Individual Activity
LAP test
Summary 20m Wrap-up and Feedback Mentoring
Signature ________________ signature______________
Prepared by ________________checked by________________________
Date _________________ Date____________
Signature______________signature______________
Module cod & Title : CON SCW1 02 0910
LO: 4 Select appropriate power tools
At the end of this session the learners shall be able to : selecting Appropriate personal protective equipment
correctly fitted and used, Selecting Power tools the needs of the job conventional work practice, Visually
Checking Power tools for tags and Selecting equipment to hold position materials for power tool application.
Nominal Learning
Activities Contents
Duration Methods
Introduction Introduction to all outcomes lecture
Lecture-
Body 1:00hr 4.1. Appropriate personal protective equipment is
selected, correctly fitted and used discussion
2:00hr 4.2. Power tools are selected consistent with the needs discussion
of the job in accordance with conventional work
practice
Power tools are visually checked for tags,
2:00hr serviceability/safety in accordance with OH&S discussion
requirements and any faults reported to supervisor in
accordance with enterprise procedures
4.4. Equipment is selected to hold, position or support
1:00hr discussion
materials for power tool application
Evaluation 35m LAP test Individual Activity
Summary 25m Wrap-up and Feedback Mentoring
Prepared by_____________________ checked by________________________
Date _________________ Date_____________________________
Signature_____________ signature________________________
Name of trainer:- __________________Department:- Construction
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 5 Use appropriate power tools
Session Objectives:
At the end of this session the learners shall be able to locating material and holding in position for
power tool application, using safely and effectively power tools in application processes and
Switching and locating safely power tools when not in use
Nominal
Activities Contents Learning Methods
Duration
Introduction Introduction to all outcomes lecture
Body 5.1 Material is located and held in position for
1:00hr Lecture-discussion
power tool application
5.2 Power tools are safely and effectively
2:00hr used in application processes Lecture-discussion
5.3. Power tools are safely switched and
1:00hr Lecture-discussion
located when not in use
Evaluation 35m Individual Activity
LAP test
Summary 25m Wrap-up and Feedback Mentoring
Resources Lecture room
Library
Learning guide
YEKA INDUSTRIAL COLLEGE
session plan
Prepared by___________ checked by________________________
Date _________________ Date______________
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 6 Clean up work area and tools
Session Objectives:
YEKA
At the end of this session the learners INDUSTRIAL
shall be COLLEGE
able to Clearing work area in accordance work
procedure, checking Tools and equipment cleaned, maintained and stored in workplace procedures,
session plan
Completing Documentation in accordance with workplace requirements.
Name Nominal
of trainer:- ________________________Department:-
Activities Contents Construction Learning Methods
Duration
Introduction Introduction to all outcomes Lecture
Body 1:00hr 6.1 Work area is cleared in accordance Lecture-discussion
with workplace procedures
6.2. Tools and equipment are cleaned, checked,
maintained and stored in accordance with
2:00hr Lecture-discussion
manufacturers' recommendations and
workplace procedures
6.3. Documentation is completed in accordance
1:00hr with workplace requirements Lecture-discussion
Evaluation 35m LAP test Individual Activity
Summary 25m Wrap-up and Feedback Mentoring
Signature __________signature__________
Prepared by ________________________ checked by________________________
Date _________________ Date_____________________________
YEKA INDUSTRIAL COLLEGE
session plan
Unit of Competence : Use Construction Hand and Power Tools
Module cod & Title : CON SCW1 02 0910
LO: 3 Use appropriate hand tools
Session Objectives:
At the end of this session the learners shall be able to This learning guide is developed to provide you the
necessary information regarding the following content coverage and topics: locating and holding material
in position for hand tool application, Using hand tools safely and effectively according to their intended use,
locating safely hand tools when not in immediate use
Nominal
Activities Contents Learning Methods
Duration
Introduction Introduction to all outcomes lecture
Body 3.3. Material is located and held in position for
2:00hr hand tool application Lecture-discussion
3.4. Hand tools are safely and effectively used
2:00hr according to their intended use Lecture-discussion
3.3. Hand tools are safely located when not in
2:00hr Lecture-discussion
immediate use
Evaluation 40m Individual Activity
LAP test
Summary 20m Wrap-up and Feedback Mentoring
Prepared by ________________checked by________________________
Date _________________ Date____________
Signature______________signature______________
