Scribd
Upload
80 views6 pages

Warrior Software Dongles

The document provides instructions for locating the U number of the Warrior Software Dongle for both Warrior 7 and Warrior 8. The U number can be found on the interface panel or by connecting the panel to a computer with the respective software installed. If no software key is detected, it will display as 'NOKEY'.

Uploaded by

bahman.m
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views6 pages

Warrior Software Dongles

The document provides instructions for locating the U number of the Warrior Software Dongle for both Warrior 7 and Warrior 8. The U number can be found on the interface panel or by connecting the panel to a computer with the respective software installed. If no software key is detected, it will display as 'NOKEY'.

Uploaded by

bahman.m
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Warrior 7 Software Dongle “U” Numbers

The U number for the Warrior Software key (Dongle) can be found on the right side of the interface
panel with the panel serial number as shown below (Figure 1). This is the software key that was
originally inside the panel and may not reflect the actual Key that is inside the panel. To make sure
either take the top off the panel and look for the USB Key on the hub at the back of the panel or use the
method below.

The U number can also be found in Warrior 7 by connecting the interface panel to a computer with
Warrior 7 Software installed via a USB Cable and opening the Warrior “Control Panel”. The U number
will be displayed to the right of “Key Authorization Code #” UXXXX as shown in figure 2.

If there is not a Software Key in the interface panel or the Software is not detecting it, it will show up as
“Key Authorization Code #” NOKEY as shown in figure 3.

Software Dongle U Number

Figure 1
Software Dongle U Number

Figure 2
No Software Dongle in
panel or Software is not
detecting software key.

Figure 3
Warrior 8 Software Dongle “U” Numbers
The U number for the Warrior Software key (Dongle) can be found on the right side of the interface
panel with the panel serial number as shown below (Figure 1). This is the software key that was
originally inside the panel and may not reflect the actual Key that is inside the panel. To make sure
either take the top off the panel and look for the USB Key on the hub at the back of the panel or use the
method below.

The U number can also be found in Warrior 8 by connecting the interface panel to a computer with
Warrior 8 Software installed via a USB Cable and opening the Warrior “Control Panel”. Selecting the
“License” tab at the top. The U number will be displayed to the right of “Key serial #:” UXXXX as shown
in figure 4.

If there is not a Software Key in the interface panel or the Software is not detecting it, it will show up as
““Key serial #:”” NOKEY as shown in figure 5.

Software Dongle U Number

Figure 1
Software Dongle U Number

Figure 4
No Software Dongle in
panel or Software is not
detecting software key.

Figure 5

You might also like