KUSH PATEL UG (B.

TECH - 3RD YEAR)

(+91) 9023960098
[email protected]

Education Institute of Technology, Nirma University Ahmedabad, Gujarat, IND

B.tech in Electronics and Instrumentation 2022 - 2026 (expected)
• Minor In : VLSI (Very Large Scale Integration)
• Minor Department : Electronics and Communication
• CGPA: 6.86/10.00

Academic 1. Sunlight-Triggered Smart Morning Alarm: Developed a sunlight-activated alarm system

Projects using an LDR sensor to trigger a buzzer when daylight is detected. Included a push-button
to stop the alarm and reset the system for daily use. (Basic Electronics)
2. Touch Sensor using 555 Timer: Designed a touch sensor circuit using a 555 timer IC
in monostable mode to activate an output on touch. Enabled simple human interaction
without mechanical switches, demonstrating basic timer-based sensing. (Applied Elec-
tronics)
3. Sound Sense LED Control using SCR: Built a sound-activated LED control circuit using
an SCR and microphone sensor to detect claps or sound pulses. The LED lights up in
response to sound, demonstrating SCR triggering and basic sound sensing. (Industrial
Drives)
4. Automatic Hand Washer and Dryer using PLC: Developed an automatic hand washer
and dryer system using Mitsubishi PLC programmed in GX Works3. The system uses
sensors to detect hands and automates water flow and air drying, enhancing hygiene and
efficiency. (Process Automation)
5. Object Size Detection and Sorting using PLC: Designed an automated system to detect
and sort objects based on size using sensors and Mitsubishi PLC in GX Works3. The
PLC logic controlled actuators to sort items efficiently, showcasing industrial automation
skills. (Programmable Logic Controller)
6. Quantitative Research on Atmospheric Pollutant Dispersion Modelling: Conducted quan-
titative research on atmospheric pollutant dispersion using mathematical modeling and
simulation techniques. Analyzed pollutant behavior under varying environmental condi-
tions to support sustainable pollution control strategies.
7. Code Converter using Verilog: Designed and implemented Binary to BCD and BCD to
Binary code converters using Verilog in Quartus, with RTL simulation and FPGA hard-
ware testing. Demonstrated digital logic design, simulation, and real-time execution on
FPGA. (Hardware Description Language Based Design using Programmable Logic)
8. F = AB’ + C(D’+A) using PMOS only: Implemented the Boolean expression F = AB’
+ C(D’+A) using only PMOS transistors in Microwind. Designed and simulated the
transistor-level circuit, showcasing skills in layout-based digital logic design and analy-
sis. (Electronics Circuit Design Using CMOS)
9. Formal Verification on 4-Bit Counter: Performed formal verification on a 4-bit binary
counter using assertion-based techniques to ensure design correctness. Verified functional
properties and timing constraints to validate counter operation under all conditions. (Es-
sential of VLSI Design Test)
10. LEE’s Algorithm Implementation: PImplemented LEE’s Algorithm for pathfinding in VLSI
design using MATLAB to optimize routing in chip layouts. Focused on efficient maze rout-
ing techniques to reduce wire length and improve layout performance. (Phsical Design
for CMOS Technologies)

1
Extra 1. International Society of Automation (ISA): ISA, Students’ Chapter, Gujarat Section,
Curricular Nirma University ”Vice Precident”(01.01.2025 - 01.01.2026)
Activities 2. Incredible Leaders League (IL2): IL2, Nirma University ”Logistics Head”(06.04.2025 -
01.01.2026)
3. Techno Cultural Committee (TCC): Techno Cultural Committee (TCC) ”Core Committee
Member” (01.01.2025 - 01.12.2025)
4. Open Automation Challenge: Open Automation Challenge 2023 India Round 1 Qualifier
(03.2023)

Internships Sankalp Engineering | Mehsana, Gujarat, India 05.2024 - 06.2024

• junior Assistant for machine Designing in ”Autocad”.
• Graphics Designer for social media and marketing.
• Machine Design map based on Engineering Drawing Guidelines
Oil and Natural Gas Corporation | Mehsana, Gujarat, India 05.2025 - 06.2025
• Assisted in maintaining IT infrastructure, network systems, and communication
technologies as part of ONGC’s INFOCOM Services during internship.
• Monitored and documented daily site activities, equipment status, and project
progress to support operational reporting and coordination at ONGC field sites.

Skills and Programming: MATLAB, Verilog, PLC(Ladder Logic), Embedded C,.

Tools Tools: Simulink, Quartus, GXWorks3, Microwind, Autocad, Arduino.