Scribd
Upload
32 views1 page

Lift Specification

This sales quotation details a motor-roomless traction lift with a capacity of 450 kg for 6 persons, operating at a speed of 0.5 m/s across 3 floors. It includes specifications for electrical requirements, lift shaft dimensions, and lift car features, such as full glass walls and LED lighting. Maintenance costs from the second year are set at $2,000 plus GST, covering quarterly maintenance and yearly tests.

Uploaded by

Aizuddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

Lift Specification

This sales quotation details a motor-roomless traction lift with a capacity of 450 kg for 6 persons, operating at a speed of 0.5 m/s across 3 floors. It includes specifications for electrical requirements, lift shaft dimensions, and lift car features, such as full glass walls and LED lighting. Maintenance costs from the second year are set at $2,000 plus GST, covering quarterly maintenance and yearly tests.

Uploaded by

Aizuddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sales Quotation: 00000 22 Thomson Hill

I GENERAL SPECIFICATIONS
1 Lift Type / Drive System Motor-Roomless Traction Machine (CN)
2 Capacity / No. of Persons 450 kg 6 Persons
3 Speed (m/s) 0.5
4 Floors / Stops / Landings 3 Floors 3 Stops 3 Landings
5 Entrances Single Side Entrances
6 Power Voltage 230V / 1-phase / 32AMP
7 Lighting Voltage 230V / 1-phase / 20AMP
8 Frequency 50HZ
9 Provision of Required Electrical Power Supply with Isolator to Lift Controller by Builder

10 Telephone Provided. Cat 6 Cable from port to controller by Builder.


11 Auto Rescue Device Provided

II - LIFT SHAFT (INTERNAL Clear)


1 EXTERNAL Shaft Construction Steel and Concrete Structure by Builder
2 INTERNAL Clear Shaft (W*D) W 1700 mm D 1700 mm
3 Provision of Required 0.16 m2 Ventilation Hole in Shaft to External of Building by Builder
4 INTERNAL Min. Clear Pit depth 1200 mm from FFL
5 INTERNAL Min. Clear Overhead 3550 mm from FFL

III - LIFT CAR


1 Car Net Dimension (W*D*H) W 1000 mm D 1250 mm H 2200mm
2 Car Ceiling C04 - Hairline Stainless Steel with 4 LED (Warm lights)
Left Wall Full Glass with HLSS Divider
3 Car Wall Finish Right Wall Full Glass with HLSS Divider
Rear Wall Full Glass with HLSS Divider
4 Push Buttons P02 Circular Frameless in white backlight (Default)
Push Button & LED Display 1, 2, 3
5 Display Indicator D02 LED (Default)
6 Car Floor 25mm recess. Floor Tiles. Supply & install by Builder

VI DOORS & ENTRANCES


1 Door Type 2 Panel Telescopic Doors. Counter-weight on Right / Left
2 Dimensions (W*H) W 800 mm H 2100 mm
3 Cabin Door Finishing Full Glass in Hairline Stainless Steel Frame.
4 Landing Door Finishing* Full Glass in Hairline Stainless Steel Frame. Non Fire-rated.
*Fire-rated doors may be required for basement levels. Architects to advice and additional cost applies.

REMARKS
1 Maintenance from Year 2: $2,000 + GST, inclusive of quarterly maintenance, yearly visual test

_____________________ -2-
Read & Accepted by Client

You might also like