Scribd
Upload
207 views2 pages

Crankshaft Main Bearing Journal Clearance

This document provides general procedures for checking the crankshaft main bearing journal clearance in a 2021 Expedition. It outlines steps including the removal of the crankshaft main bearing cap, the use of Plastigage for measurement, and the importance of ensuring the crankshaft is not turned during the process. Proper specifications must be followed to ensure accurate clearance measurements.

Uploaded by

andyjberry96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views2 pages

Crankshaft Main Bearing Journal Clearance

This document provides general procedures for checking the crankshaft main bearing journal clearance in a 2021 Expedition. It outlines steps including the removal of the crankshaft main bearing cap, the use of Plastigage for measurement, and the importance of ensuring the crankshaft is not turned during the process. Proper specifications must be followed to ensure accurate clearance measurements.

Uploaded by

andyjberry96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

303-00 Engine System - General Information 2021 Expedition

General Procedures Procedure revision date: 08/28/2012

Crankshaft Main Bearing Journal Clearance

Check

NOTE: Refer to the appropriate Section 303-01 for the specification.

1. NOTE: Crankshaft main bearing journals must be within specifications before checking journal clearance.

Remove the crankshaft main bearing cap and crankshaft main bearing.

2. Position a piece of Plastigage across the crankshaft main bearing surface.

3. NOTE: Do not turn the crankshaft while carrying out this procedure.

Install and tighten to specifications, then remove the crankshaft main bearing cap.

4. Measure the Plastigage to get the crankshaft main bearing clearance. The Plastigage should be smooth and flat. A changing width indicates a tapered or
damaged crankshaft or crankshaft bearing.
© Copyright 2022, Ford Motor Company.

You might also like