Scribd
Upload
46 views3 pages

Manual

The Hygene Plus is a bench top glass insitu fermentor with a capacity of 4 to 10 liters made from borosilicate glass and stainless steel 316L. It features a modular control system for pH, DO, temperature, agitation, and pressure, with various sensors and a data acquisition system for monitoring up to eight parameters. Essential accessories and a starter kit are included for operation and maintenance.

Uploaded by

Siddhartha Moulik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views3 pages

Manual

The Hygene Plus is a bench top glass insitu fermentor with a capacity of 4 to 10 liters made from borosilicate glass and stainless steel 316L. It features a modular control system for pH, DO, temperature, agitation, and pressure, with various sensors and a data acquisition system for monitoring up to eight parameters. Essential accessories and a starter kit are included for operation and maintenance.

Uploaded by

Siddhartha Moulik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

FERMENTOR- Model: Hygene Plus

Insitu Glass Fermentor


FERMENTOR Hygene Plus specification
Model: Bench top Glass Insitu
Vessel capacity 4/5/7/10Lit Borosilicate Glass

Head Plate & bottom plate MOC: SS 316L


Ports in Top plate Port for stirrer assembly, pH sensor, DO
sensor, Foam sensor, pressure sensor,
Air In, Air Out, acid/base/antifoam doing,
sampling, addition port
Stirrer Assembly Lip seal stirrer assembly with two height
adjustable 6 Blade ruston impellers.
PMDC motor with tacho feed back along
with spring loaded coupling for smooth
mixing without vibration. Speed upto
700rpm
Holders for sensor /adapter/ Blind stoppers pH ,DO & foam sensor holder, Media
in head plate triple inlet for acid/base/antifoam dosing,
Air sparger, air out with exhaust filter
and open/close valve, Pressure sensor
holder, sampling pipe, Blind stopper for
DO port and Foam ports, 4 Blade baffle
assembly. Unique suitable SS
puncturing needles for sampling , air in,
air out, inoculum, feed addition
Ports in Bottom plate with stand Port for Temp sensor , Heating finger U-
tube heat exchanger, Drain
Holders for sensor/adapter/Blind stoppers in Holder for temp sensor, Heating finger,
bottom plate U-tube heat exchanger
Sensors Temp, Gel filled sterilizable pH sensor &
SS polarographic DO sensor -Broadley
James USA, Pressure sensor, foam
sensor
Controls and display Modular independent controls of pH,
DO, temp, Agitation, foam ,pressure
and digital display. Two Set point control
of pH with three point buffer auto
calibration. Aeration by flow meter 0-
5lpm/10lpm with air pump & O2 flow
meter 0-5lpm. Sterilization control upto
121deg C without steam generator along
with pressure safety mechanism by
independent pressure sensor and
control
Measurement and Control range pH 2-24, DO 0-100% or 8.24mg/l,
process Temp: 20 deg c to 60deg C,
Sterilization temp: upto 121deg C
Pressure upto 50psi
Fixed speed peristaltic pump Three nos for acid/base/antifoam dosing
with Teflon non spring head.
Variable speed peristaltic pump Two nos for feed addition and harvest
with digital display and control with
Teflon non spring head
Chiller cum circulator Capacity 10Lit, Digital display and
control. Temp upto 4deg C, external
circulation with required tubings.
Data Acquisition system 4inch Touch screen with USB interface,
pen drive data download facility. Upto
eight parameters should be recorded
like pH, DO, temp, speed etc.
Essential accessories Silicon tubing for acid/base addition-
10m, air in and sampling 10m, water
circulation -5m. air vent filters 0.2micron
sterilzable 6Nos, silicon septum-
25Nos.
Starter kit Spare Silicon-O-rings for head plate,
bottom plate-1No each, all other ports-
5Nos each, Lipseal 5Nos, alen key
Stabilizer: Suitable

Email: [email protected]/[email protected] Mob: 9840082030

You might also like