ELECTRONICA PLASTIC MACHINES LIMITED

S-16, 2nd Floor, D.D.A. Shopping Centre, Opp. Jeewan Anmol Hospital, Mayur Vihar Phase-I, Delhi-110 091.
Tel.: 91-11-42547338 e-mail: [email protected]; Website : www.elpml.com
CIN No.U25200PN2007PLC131189. PAN NO. : AACCE0874D
GST NO. 27AACCE0874D1ZW State Code : 27 (Maharashtra)

QUOTATION/OFFER
No: EPML/FUTURA/ED/WCPL/2024-25/SKC Date: 13th April, 2024

M/s. Wound Component Pvt. Ltd.,

B-3/19, DSIDC Flatted Factory Complex,
Behind Dilshad Garden Metro Station,
DELHI-110095.
Mob : 9971707452

Kind Attn : Mr.Dhananjaya Aggarwal.

Subject : Quotation/Offer for “Futura” Series Injection Moulding Machine

Dear Sir,

“Electronica Group” was formed way back in 1973 by Technocrats having diversified interest in
manufacturing as well as trading of various machine tools primarily for producing molds.

As the group was working closely with the “Plastics” Industry for many years by supplying the
machines for making Molds, it was decided to expand & extend ourselves into manufacturing of Plastic
Injection Molding Machines. Today we have more than 26 years of experience in manufacturing of
variety of “Plastic Injection Molding Machines" having an installed base of about 5000 Injection
Molding Machines for processing various types of polymers.

With a strong emphasis on application specific and customer centric developments and a strong desire
to bring innovative but at the same time economical technologies for the industry, the company made
few pioneering moves when it launched:
 India’s first Micro-processor-based Injection molding machine with Toggle type clamping
mechanism
 India’s first `Built-in Power Saver’ for Injection Molding machines
 India’s first fully indigenized `Servo Motor + Gear Pump’ machines
With this we are successfully continuing our journey from Molds to Molding Solutions…….

We, as a dedicated & committed team of people are working efficiently to bring new technologies for
the Plastic Industry in years to come.

Our existing ranges of Injection Molding Machines and other allied Products are as under:
 e-Profit (Servo Motor + Gear Pump) (Non servo optional)
 Futura Series (Servo Motor + Gear Pump) (Non servo Optional)
 Ventura Series- Next Generation Injection Moulding machine
 Thin Pack Series - Exclusively for producing thin wall containers
 PETLINE Series - Exclusively for producing PET Preforms
 RPVC / CPVC Series - Exclusively for producing RPVC / CPVC fittings
 Injection Molding machines for special Applications
 Auxiliary Equipment’s
 Vertical Injection molding Machines
 Industry 4 solution for machine and complete plant.
Page 1 of 10
We are also happy to add that We have got the CE marking for our entire Ventura series. CE marking is
certification mark that indicates conformity with health, safety and environmental protection
standards.

The assessment was carried out by CEPROM Romania (Notified body no 1802) with their India
representative URS and Certificate No.172-ET-12019 (which can be verified at below link
http://ceprom.ro/index.php/en/issued-certificates-e).
So, in case of requirement of CE machines we can offer the same with Special CE scope.

To continue to further boost our presence as a better & preferred solution provider,
`Electronica Plastic Machines Ltd.’ has introduced all new, state of the art “HyLock” series of
Hydraulic Plastic Injection Molding Machines which has received very good response from
market.

Our manufacturing plant is fully equipped with state-of-the-art machines for in house machining &
testing of various components. Our manufacturing facilities are spread over an area of 70,000+ sq. ft.

We trust you would find our offer in line with your business requirements and shall wait for your
favorable decision for serving your respectable organization.

Thanking you and assuring you, our best attention always,

Yours faithfully,
For Electronica Plastic Machines Limited

Sanjaya Kumar Chaudhuri

Executive-Sales
Mob : 9311858987
Email : [email protected]

Encl: Annexure I - Scope of supply

Annexure II – Commercial Terms & Conditions
Annexure III – General Terms & Conditions

Page 2 of 10
 ANNEXTURE - I

STANDARD SCOPE OF SUPPLY OF “Futura “Series MACHINES

CLAMPING UNIT:

 Sturdy five-point double toggle mechanism for fast, smooth platen movement & even clamp
force distribution.
 Optimized platen design with FE analysis
 Box type square platen construction
 Higher mold opening strokes
 Increased maximum mold thickness
 Higher maximum daylight
 5 stages, each independently settable closing / opening speeds, pressures and positions for
better control of mold movement
 Self lubricating bushes for toggle mechanism
 Dust wipers on tie-bars
 Stress-relieved, strong & compact machine base frame
 Low pressure mold safety
 Higher ejector stroke
 Generous access to ejector area
 Multi stroke ejection with pulsating and on-fly selection
 Precise mold thickness adjustment through sun and planetary gear arrangement
 Auto mold thickness adjustment with auto tonnage built-up as per the set pressure
 Clamping cycle based auto grease lubrication through machine controller
 Built-in hydraulic and electrical safety for clamping
 Single core-pull attachment

Page 3 of 10
INJECTION UNIT:

 Well proven nitrided screw and barrel

 Higher injection pressure
 Holding pressure profile programmable in 5stages (time base) for better control over part
dimensions / power consumption
 Higher injection rates
 Injection speed profile programmable in 6 stages (stroke dependent) for greater control over
mold filling
 Higher Plasticizing capacities for shorter cycle time
 Cold start-up prevention
 Screw speed profile programmable in 5 stages (adjusted in percentages)
 Melt decompression (suck back) before and after Plasticizing
 Four (or five) zones, PID temperature control for barrel with settable tolerance band & bar
graph display
 Alarms for deviation and set to actual and thermocouple breakage parameters
 Feed throat temperature indication
 Settable delay to start Plasticizing, useful while processing heat sensitive materials
 Cold start protection for screw
 Reduction of barrel temperature to a pre-set value during short process interruptions
 Settable nozzle forward speed and pressure in two steps for extending mold / sprue bush and
platen life
 Auto cushion adjustment facility
 Auto purge facility
 Back Pressure control through controller

EJECTOR

 Central hydraulic ejector with multiple stroke features. Speed, pressure and position
independently settable in both directions.
 Ejector speed and pressure programmable in two stages.
 Linear transducer for accurate ejector position control.
 Multi point ejector plate.
 Provided with multiple ejector rods.
 Pulsating ejector strokes up to 99 pulses.
 Ejector hold / stay forward function.

Page 4 of 10
TEMPERATURE CONTROL

 4 / 5 self-optimizing temperature control zones / circuits for the barrel and nozzle flange
heating system with adjustable tolerance band for monitoring of deviation from set point.
Thermocouple breaks down alarm.
 Operating temperature range of up to 450ºC.
 Reduction in barrel temperature to a preset value during machine idle time.
 Ceramic barrel heating bands.
 PID controlled barrel heater bands, with solid state relays and fast blowing semi conductor
fuses for barrel heating system.
 Auto heat start-up and shut down.
 Feed throat temperature indication.

HYDRAULICS

 All hydraulic manifolds and valves mounted close to the actuators for faster response.
 Hydraulic valve on / off visual signal indication.
 Hydraulic oil tank with large and easy access for cleaning.
 Hydraulic oil low and high temperature monitoring with alarm and machine stopped in case of
deviation.
 Large capacity heat exchanger for hydraulic oil cooling.
 Fast responding hydraulic door safety interlock.
 Core pulling control set for hydraulic cores independently programmable.
 Ergonomically designed, easy to access and easy to service hydraulic layout.
 Hydraulic oil suction filter (strainer).
 Energy saving "pump switch off feature" in case of idle running.

STANDARD FEATURES:

 Servo Motor Controlled with gear pump, high precision hydraulic system
 Ergonomically designed machine covers for safety, with elegant aesthetics
 Stress-relieved, strong & compact machine base frame
 Highly reliable electrical & electronic components from reputed manufacturers
 Ergonomically designed, easy to service hydraulic circuit
 Hydraulic oil level gauge.
 Heat exchanger for hydraulic oil cooling.
 Magnetic trap in feed hopper.
 5-in / 5-out Ball valve type cooling water arrangement.
 Flexible machine supports with Anti-vibration pads.
 Separate oil filter for fine straining (bypass filtration) integrated in the machine.

Page 5 of 10
STANDARD TOOL KIT:

Allen key set (mm series, 1.5 to 10 mm, plate 1 set

Bigger Allen keys (12 / 14 / 17 / 19mm) 1 no. each (19mm NOT included in 60T)
Single ended spanners (36/ 41/ 46/ 55/ 60mm) 1 no. each (60mm NOT included in 60T)
Double ended spanners (6-7 / 8-9 /10-11/ 12-13/ 1 no. each
14-15 / 16-17 / 18-19 / 20-22 / 24-27 / 30-32 mm)
“O” spanner for screw tip head body 1 no.
Injection screw spanner 1 no.
Injection cylinder – rod seal 2 nos
Injection cylinder – rod wiper 2 nos.
Brass ferrules; 4 mm & 6 mm 10 each
Magnetic grill for feed Hopper 1 no.
Machine manual & component list 1 set
Machine’s Controller manual 1 no.
Anti-vibration pads 1 set.
Moulded case Tool Box 1 No.
Grease (EP02) for Links, Tiebars, Toggle 1 kg
Grease (XHP 22) for Transmission Shaft 1 kg

OPTIONAL FEATURES

 Additional core pulling control set for hydraulic cores, independently programmable.
 Additional Air blast with pneumatic valve on moving platen.
 Rotating core interface.
 Signal for Electrical un-screwing interface.
 Robotic arm interface.
 Ejector/Core on Fly
 Photo-sensor arrangement for molded part drop detection for single cavity.
 Interface for ejector retract (back) verification with limit switch.
 Insulated energy saving heater bands.
 Additional Set of electrical output - single phase (1 x 10A) and three phase (1 x 16A).
 Water battery with flow rate control and temperature indicator.
 Interface for additional nozzle heater band (plug only).
 Hopper Dryer
 Auto Loader
 Chiller
 Crusher
 Robots
 Industry 4.0

Page 6 of 10
 CONTROLLER FEATURES “FUTURA” Series MACHINES
 Intelligent HMI with 8.4" TFT color display with alpha numeric keyboard.
 Actual position measuring / indicating system for moving platen, screw travel and ejector.
 Overview screen with live display of machine operations.
 Continuous process control via monitoring of important process parameters with
selectable tolerance band.
 Shot (molding) counter pre-selection with automatic switch off feature.
 Batch production counter with alarm indication.
 Fault diagnostics in the event of machine malfunction or operator error with plain text
messages and recording of source of error.
 Data storage on removable USB drive.
 Regulated power supply 24VDC for controls and actuators.
 Multi-level password for preventing tampering of parameters.
 Flash lamp / acoustic alarm.
 Digital setting of all times, setting range in 0.01 seconds.
 I / O diagnosis - analog & digital.
 Individual keys for manual functions including process mode selection.
 Separate single screen (page) for quick setting of all important process parameters.
 Function wise layout of pages (screens) and display of various process parameters in clear
text.
 Core hold (energized) during injection stage to retain the core position.
 Filters for electrical noise suppression.
 Main voltage 415V / 3 ph / 50 Hz. Control voltages 24 VDC / 240 V.
 MPCB for main electric motor protection (to protect against single phase, short circuit &
overload).
 "On-delay" timer for the control circuit.
 Internal storage of up to 200 sets of mold data.
 Injection speed settable in % and pressure settable in bar.
 14 important parameters monitoring for last 500 cycles.
 Hourly production monitoring data.

Page 7 of 10
 Annexure – II

Commercial Terms & Conditions

Machine Model Unit Price in Rs.

Quotation Price Offered Price
Futura Model : 160T (IU No.592-22)
with Servo Motor & Gear Pump. Rs. 35,45,000/- Rs. 24,80,000/-

Hopper Dryer 50 kgs. with Hopper Mounting

Rs. 38,000/-
Plate.
Auto loader SAL-800G1 (3 Phase) Rs. 58,000/-

Scope Of Supply :-

 B-type Bi-Metallic Screw Barrel (30% Glass Filled)

 T-Slot Platens
 Single Core-Pull
 Anti-Vibration Pads
 Centralized Lubrication System
 Water Manifold
 Mold Clamps
 Phase Failure Protection Relay
 Standard scope of supply & standard spares as per catalogue.
Delivery One month from the date of receipt of your
commercially and technically clear order.
Payment Terms 30% of total value of the order as an irrevocable
security deposit advance. The balance payment
along with any other charges and duties are extra &
are to be paid before delivery. The deposit is
interest free and will be forfeited in the event of
cancellation of order (It is understood that order
once placed cannot be cancelled without our
consent in writing and without payment of
cancellation charges).

IGST @18%
Freight Extra at Actual and it will to Buyers account
(By Wound Component Pvt. Ltd.)
Insurance By Electronica Plastic Machines Ltd.
Octroi If applicable, will be borne by buyer.
Validity 30 days from the date of offer.
Order in favor of Electronica Plastic Machines Limited.
Gat No.399, Hissa No.1 & 2,
Bhare, Tal. Mulshi, Dist. Pune - 412 115
Tel. (020) 32533552/ 32533518

Page 8 of 10
 ANNEXURE – III
TERMS AND CONDITIONS OF SALE
1. Quotations are subject to confirmation or amendment by us at the time Customer’s order is received and to the goods referred in the quotations
being available then.
2. All goods and services are supplied on the terms and conditions set out herein and no addition or variation to these terms and conditions will have
any effect unless expressly agreed in writing by us.
3. Customer The customer means person/s, firm, company, and institution. Government or any other Authority who place the purchase order on us.
4. Prices: Prices given are on the basis of Ex-works. All other applicable taxes, Octroi, duties and other statutory duties levied by the Government
will be charged as applicable at the time of delivery. Quoted prices are based on import duty and exchange rates prevalent as of now; if these
changes even within the validity of offer/order, then our prices will stand revised accordingly.
5. Insurance: By you or can be arranged by us covering all risks (except war risk) from our factory to the destination indicated by you at the rate of
one percent which will be to your account. In case insurance is arranged by us on your behalf, it is your responsibility to inform us about damages
etc. within 7 days from the receipt of goods at your end. No claims shall be entertained thereafter. When insurance is arranged by us the process
of claim with the underwriter is to be initiated and processed by the purchaser.
6. Octori: If applicable will be paid by you directly to the appropriate Authorities. Arrangement and payment of Octroi charges incurred or incurable
by the transporter will have to be paid immediately by the customer on arrival of transporter, failing which the transporter can deny to handover
the material. Any retention charges arising out of any delay from customer side will have to be mutually settled between customer and transporter
without involving us.
7. GST: GST applicable @ actual at the time of delivery will be charged extra.
8. Payment : 30% advance with order and balance with full taxes, duties, freight, insurance charges and erection and commissioning charges in full
against Proforma Invoice before dispatch. Interest at 20% per annum will be charges on all the bills not paid within due date, for documents
presented through Bank whenever this term of payment has been agreed. Any demurrage arising out of late retirement of documents will be to
your account. Further the Customer is not entitled to withhold payment or make any deduction from the quoted price of the goods in respect of
any set off or counterclaim.
9. If the Customer fails to pay for the order placed, in whole or in part, we may in our own absolute discretion, but without prejudice to any other
remedy, postpone the fulfilment of our obligations under the present towards the Customer until such payment is made and charge to the Customer
any extra expense incurred thereby.
10. Inspection: Manufacturer’s inspection before dispatch shall be final. Any inspection by the customer or their approved authority will be carried out
at our works, prior to dispatch, if stipulated so in the Purchase Order.
11. Delivery: The delivery schedule mentioned by us is for guidance purposes only and may be subject to change. Deliveries quoted are subject to
prior sale and confirmation by us. All delivery periods start from the date of receipt of the necessary advance as per payment terms above and
only when all details of execution have been made clear and both parties are in agreement with the conditions of the contract. Its strict
observance presumes the fulfilment of the contractual obligations of the customer, particularly the conditions of payment agreed upon. Delivery
promised is based on the current manufacturing programme. We will endeavour to keep to the date given, but accept no liability for failure to do
so. Delay in the delivery quoted shall not ender the contract voidable on the part of the purchaser and no claim either direct can be made on us on
account of delays. In no case shall the purchaser have the rights to withhold the balance payment or reject goods on account of delay in delivery.
12. Specifications: Illustrations, Drawings, descriptive matter, weight, power, dimensions and other particular submitted in connection with our
quotations are approximate only and without any obligations, are not guaranteed and subject to change without any notice.
13. Liability: Liabilities will pass over to the customer immediately upon dispatch ex-works. Shortages will not be entertained by us unless informed in
writing, within 7 days after arrival of goods at the destination when dispatched by Road or Airfreight.
14. Warranty: The machines offered are warranted for a period 12 months from the day of receipt of the equipment / machine by the customer against
any manufacturing inadequacies, under proper use therein and arising solely out of faulty design or workmanship. Any breakages, damages etc.
arising out of careless handling etc. are not covered under the warranty conditions. Expendable items like bulbs, fuses etc. are not covered under
the warranty condition. For promptness expected out of the warranty services, it is your obligation to inform us about complaints in fullness in the
format of the complaints questionnaire that will be given to you with the supplies or at the time of commissioning.
15. Force majeure: We shall be under no liability under any contract arising out of our quotation wherever fulfilment of our or our supplier’s
obligations is hindered or prevented by causes such as war, strikes, lockouts, fire accidents, epidemics, failure or supply of electricity or other
power shortages of materials or labor, or orders of Government or other duly constituted authority.
16. Ownership: The consignment will be the property of the customer only after receipt of all payment to be made by him in accordance with the
delivery contract.
17. Dispatch: All goods will be sent by Road Transport on freight TO PAY Basis. If you want us arrange for transportation (freight paid basis), the same
will be arranged by us and charged at actual extra in our bills. We normally send all our full machines by full truckload. The Customer shall assume
all risk of loss or damage upon delivery by us to the carrier at the point of transport. Scheduled dates of delivery are determined from the date of
our acceptance of any order or orders placed by the Customer and are estimates of approximate dates of delivery, not a guaranty of a particular
date of delivery. We shall not be liable for any damages caused by failure or delay in transport the Goods, if such failure or delay is due to strike or
other labor difficulty, an act of the Customer, an act of a governmental authority, transportation shortage or failure, inability to obtain sufficient
fuel, labor, materials or manufacturing facilities, or any other cause beyond our reasonable control.
18. Contract: The contract will deem to be completed on receipt of order confirmation from us. Order once placed cannot be revoked without our
consent. Telegraphic and Telephone alterations regarding quantities or specifications require written confirmation by us before execution and are
deemed to be entered in to in PUNE and no proceedings to enforce any claim and no suit arising out of any contract shall be instituted except in a
court of complaint jurisdiction located within the Municipal limits of Pune.
19. Price Variation: The prices quoted above are based on the current manufacturing costs, and will be subject to adjustment at rates ruling at the
time of supply.
20. Post Warranty Service: This is available through service contract.
21. Cancellation: Except where the Customer has a statutory right of termination, orders accepted by us may not be cancelled either wholly or in part
without our express consent in writing. In the event of order cancellation after placement of order with advance we reserve the right to forfeit the
advance.
22. Arbitration: Any dispute or difference whatsoever arising out of or relating to the construction, meaning, scope, operation or effect of this
quotation or contract between us and the Customer or the validity or the breach thereof, both parties agree that the same, if not mutually resolved
within 30 days, would be resolved by arbitration, by a sole arbitrator to be appointed and nominated by us, in accordance with the Arbitration &
Conciliation Act 1996, and the award made in pursuance thereof shall be binding on both the Parties. The venue of the arbitration proceedings shall
be Pune.
23. Jurisdiction: This contract is deemed to be entered in PUNE and all disputes arising there under shall be subject to the jurisdiction of PUNE.

Page 9 of 10
Page 10 of 10