AAU5639w

Description

Issue 01
Date 2020-03-30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. i

 AAU5639w
Description Contents

Contents

1 About This Document .................................................................................................................. 1

2 Product Characteristics................................................................................................................. 2
3 AAU5639w Description ............................................................................................................... 4
3.1 AAU Exterior ................................................................................................................................................................ 4
3.2 AAU Functions ............................................................................................................................................................. 6
3.3 AAU Ports and Indicators ............................................................................................................................................. 8
3.4 Version Differences..................................................................................................................................................... 10

4 AAU5639w (3500 MHz) Technical Specifications ................................................................ 11

4.1 AAU5639w (3500 MHz) RF Specifications ............................................................................................................... 11
4.2 AAU5639w (3500 MHz) Antenna Specifications....................................................................................................... 13
4.3 AAU5639w (3500 MHz) Receiver Sensitivity ........................................................................................................... 14
4.4 AAU5639w (3500 MHz) Engineering Specifications ................................................................................................ 15
4.5 AAU5639w (3500 MHz) CPRI Port Specifications ................................................................................................... 17

5 AAU5639w Installation Overview ........................................................................................... 19

5.1 Mounting Kits............................................................................................................................................................. 19
5.2 Installation Scenarios.................................................................................................................................................. 20
5.2.1 Requirements for the Pole Where the AAU Is Installed .......................................................................................... 20
5.2.2 Installation Clearance Requirements ....................................................................................................................... 23

6 Acronyms and Abbreviations ................................................................................................... 27

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. ii

AAU5639w
Description 1 About This Document

1 About This Document

AAU5639w (3.5 GHz) Product Exterior

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 1

AAU5639w
Description 2 Product Characteristics

2 Product Characteristics

Leading Performance
 Multiple channels
The AAU5639w uses the massive MIMO technology and supports 64T64R.
Massive MIMO features the adoption of massive antenna arrays for joint signal reception
and demodulation or transmission, and therefore significantly enhances single-user link
performance and multi-user spatial multiplexing capability, and improves system link
quality and transmission rates when compared with traditional multiple-antenna
technologies. Massive MIMO also enables the system to flexibly adjust beam forms in
both the horizontal and vertical planes, significantly enhancing 3D coverage capability.
 Large bandwidth
The AAU5639w supports a large bandwidth and C-band deployment.
C-band is a mainstream frequency band and has abundant spectrum resources. Operators
can obtain more than 100 MHz bandwidth in the frequency band. The AAU supports
diverse operators' spectrum resources in C-band. Only one such module can be used to
complete the C-band deployment, saving site antenna space and reducing network
construction costs.
 High power
The advanced power amplification technology of the AAU5639w achieves a maximum
of 240 W power.
The AAU adopts the industry-leading power amplification technology,
Huawei-developed IF and RF chip, and Huawei's unique antenna element technology.
Therefore, it features ultra-high power to provide a wider signal coverage area.

High Integration
 Light weight and small size
The AAU5639w integrates the functions of antennas and RF modules. Its weight and
dimensions are much lighter and smaller than those of the traditional RRU+antenna
solution.
 Small frontal area
The frontal area of the AAU5639w is smaller than that of a common antenna.
 Flexible deployment
The integrated design of the AAU5639w saves the jumper, external combiner, and the
installation space required by the RRU. This simplifies the antenna installation platform

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 2

AAU5639w
Description 2 Product Characteristics

and enables flexible deployment. Its support for 3D beamforming and tilt adjustment
reduces requirements on the antenna height and facilitates installation.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 3

AAU5639w
Description 3 AAU5639w Description

3 AAU5639w Description

This section describes the exterior, functions, ports, indicators, and version differences of an
AAU.
3.1 AAU Exterior
This section describes the AAU exterior.
3.2 AAU Functions
An AAU integrates the antenna and RF unit. Its main function modules include the antenna
unit (AU), radio unit (RU), power module, and L1 (physical layer) processing unit.
3.3 AAU Ports and Indicators
This section describes the physical ports and indicators on an AAU.
3.4 Version Differences
This section describes the application differences of the AAU5639w in different versions.

3.1 AAU Exterior

This section describes the AAU exterior.
Figure 3-1/0 shows the AAU exterior.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 4

AAU5639w
Description 3 AAU5639w Description

Figure 3-1 AAU (3.5 GHz) exterior

(1) Mounting kit: upper (2) Mounting kit: lower (3) Anti-falling safety
handle handle reinforcement hole

Figure 3-2/0 shows the AAU dimensions.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 5

AAU5639w
Description 3 AAU5639w Description

Figure 3-2 AAU (3.5 GHz) dimensions

3.2 AAU Functions

An AAU integrates the antenna and RF unit. Its main function modules include the antenna
unit (AU), radio unit (RU), power module, and L1 (physical layer) processing unit.
Figure 3-3 shows the AAU logical structure.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 6

AAU5639w
Description 3 AAU5639w Description

Figure 3-3 Logical structure

Table 3-1 describes function modules of an AAU.

Table 3-1 Function modules of an AAU

Function Function Description
Module

AU Each antenna uses an 8x12 array and supports 96 dual-polarized

elements to transmit and receive radio waves.
RU The RF unit processes RF signals and performs phase correction for
uplink and downlink RF channels. The related sub-function modules are
as follows:
 CPRI port and digital intermediate frequency (IF): CPRI signal
transmission and digital IF processing
 ADC and DAC: Analog-to-digital conversion (using the ADC) and
digital-to-analog conversion (using the DAC) (ADC is short for
analog-to-digital converter and DAC is short for digital-to-analog
converter.)
 Low-power RF signal: Down-conversion and amplification for RF
signals; up-conversion and amplification for analog signals
 Power amplifier (PA): Signal power amplification
 Filter: Protection and filtering

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 7

AAU5639w
Description 3 AAU5639w Description

Function Function Description

Module

Power module Supplies operating voltage to the AAU.

L1 processing  Provides enhanced common public radio interface (eCPRI) ports to
unit converge or distribute eCPRI signals.
 Implements the uplink and downlink processing at the 5G NR
physical layer.
 Performs I/Q modulation, mapping, and digital weighting in the
downlink.

3.3 AAU Ports and Indicators

This section describes the physical ports and indicators on an AAU.
Figure 3-4 shows the physical ports and indicators on an AAU.

Figure 3-4 Physical ports and indicators

Physical Ports
Table 3-2 describes the physical ports on an AAU.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 8

AAU5639w
Description 3 AAU5639w Description

Table 3-2 Physical ports

Silkscreen Connector Description
Type

CPRI1 DLC connector Optical port 1 with a data rate of 10.3125 Gbit/s or
25.78125 Gbit/s. An optical module must be inserted
into the port for optical fiber installation.
CPRI0 DLC connector Optical port 0 with a data rate of 10.3125 Gbit/s or
25.78125 Gbit/s. An optical module must be inserted
into the port for optical fiber installation.
PWR Outdoor –48 V DC power port
quick-lock
power
connector
AUX DB15 male Port for an antenna information sensor unit (AISU) to
connector transmit AISG signals
TEST N/A Reserved port, which is unavailable

Indicators
Table 3-3 describes the indicators on an AAU.

Table 3-3 Indicators

Silkscreen Color Status Description

RUN Green Steady on There is power supply, but the module is

faulty.
Steady off There is no power supply, or the module is
faulty.
Blinking (on for The module is working properly.
1s and off for 1s)
Blinking (on for The module software is being loaded or the
0.125s and off module is not working.
for 0.125s)
ALM Red Steady on An alarm is generated, and the module
must be replaced.
Blinking (on for An alarm is generated. The alarm may be
1s and off for 1s) caused by a fault on a related module or
port. Therefore, you need to locate the fault
before deciding whether to replace the
module.
Steady off No alarm is generated.
ACT Green Steady on The module is working properly when TX

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 9

AAU5639w
Description 3 AAU5639w Description

Silkscreen Color Status Description

channels are enabled or software is being
loaded to the module that is not started.
Blinking (on for The module is working properly with TX
1s and off for 1s) channels disabled.
 CPRI0 Red or Steady green The common public radio interface (CPRI)
 CPRI1 green link is working properly.
Steady red The optical module fails to receive or
transmit signals. Possible causes include
that the optical module is faulty and that
the optical fiber is broken.
Blinking red (on The CPRI link is out of lock. Possible
for 1s and off for causes include faults on the mutual lock of
1s) dual-mode clock sources and mismatched
data rates on CPRI ports.
You are advised to check the system
configuration to locate the fault.
Steady off The optical module cannot be detected or is
powered off.

3.4 Version Differences

This section describes the application differences of the AAU5639w in different versions.

AAU5639w (3400 MHz to 3600 MHz)

Table 3-4 Version differences of an AAU5639w (3400 MHz to 3600 MHz)

Version Version Difference

SRAN15.1  In LTE TDD mode, six LTE TDD carriers are supported.
 In TN (TDD) mode, one NR TDD carrier and three LTE TDD
carriers are supported.
SRAN16.0  In LTE TDD mode, eight LTE TDD carriers are supported.
 In TN (TDD) mode, one NR TDD carrier and four LTE TDD
carriers are supported.
SRAN16.1  In LTE TDD mode, eight LTE TDD carriers are supported.
 In TN (TDD) mode, one NR TDD carrier and five LTE TDD
carriers are supported.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 10

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

4 AAU5639w (3500 MHz) Technical

Specifications

The technical specifications of an AAU5639w (3500 MHz) include RF specifications, antenna

specifications, receiver sensitivity, engineering specifications, and CPRI port specifications.
5.1 AAU5639w (3500 MHz) RF Specifications
The RF specifications include radio access technologies (RATs), frequency bands, TX/RX
modes, capacity, and output power.
5.2 AAU5639w (3500 MHz) Antenna Specifications
The antenna specifications include the frequency range, gains, and beam range of the antenna.
5.3 AAU5639w (3500 MHz) Receiver Sensitivity
The receiver sensitivity of an AAU measures the capability of the AAU to receive signals with
the minimum power.
5.4 AAU5639w (3500 MHz) Engineering Specifications
The engineering specifications include the dimensions, weight, input power, module power
consumption, and environmental specifications.
5.5 AAU5639w (3500 MHz) CPRI Port Specifications

4.1 AAU5639w (3500 MHz) RF Specifications

The RF specifications include radio access technologies (RATs), frequency bands, TX/RX
modes, capacity, and output power.
 Unless otherwise specified, in the following, LTE and eNodeB always include LTE FDD,
LTE TDD, and LTE NB-IoT. In scenarios where they need to be distinguished, LTE
FDD, LTE TDD, and LTE NB-IoT are used. The same rules apply to eNodeB.
 Unless otherwise specified, in the following, NR and gNodeB always include FDD and
TDD. In scenarios where they need to be distinguished, NR FDD and NR TDD are used.
The same rules apply to gNodeB.
 In the following, G is short for GSM, U is short for UMTS, L is short for LTE FDD, T
is short for LTE TDD, M is short for LTE NB-IoT, N is short for NR, N (FDD) is short
for NR FDD, and N (TDD) is short for NR TDD.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 11

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Supported Frequency Bands and RATs

Table 4-1 Frequency bands and RATs supported by an AAU5639w (3500 MHz)
Frequency Protocol-de Frequency RAT IBW OBW
Band fined Band Range (MHz) (MHz)
(MHz) (MHz)

3500 Band 42/n78 3400 to LTE TDD, 200 200

3600 NR TDD,
TN (TDD)
3500 Band 42/n78 3420 to LTE TDD, 180 180
3600 NR TDD,
TN (TDD)

TX/RX Modes and Capacity

Table 4-2 TX/RX modes and capacity of an AAU5639w (3500 MHz)

Frequency Frequency TX/RX Capacity Supported
Band Range Mode Bandwidth
(MHz) (MHz) (MHz)

3500 3400 to 64T64R LTE TDD: 8 carriers LTE TDD:

3600 NR TDD: 2 carriers 10/15/20
TN (TDD): 1 NR NR TDD:
TDD carrier and 5 20/30/40/50/60/70
LTE TDD carriers /80/90/100

3500 3420 to 64T64R LTE TDD: 8 carriers LTE TDD:

3600 NR TDD: 2 carriers 10/15/20
TN (TDD): 1 NR NR TDD:
TDD carrier and 5 20/30/40/50/60/70
LTE TDD carriers /80/90/100

Capacity specifications vary with the software version. For details, see "Version Differences" or Typical
Power Configuration Reference for AAU Modules.

Output Power and Carrier Configurations

Table 4-3 Output power and carrier configurations of an AAU5639w (3500 MHz)
Frequency Frequency Maximum Output Power Configuration
Band Range Output Power
(MHz) (MHz)

3500 3400 to 240 W For typical configurations, see Typical

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 12

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Frequency Frequency Maximum Output Power Configuration

Band Range Output Power
(MHz) (MHz)
3600 Power Configuration Reference for
AAU Modules.
3500 3420 to 240 W For typical configurations, see Typical
3600 Power Configuration Reference for
AAU Modules.

 Each Output Power per Carrier (W) value in the Typical Power Configuration Reference for AAU
Modules document indicates the maximum output power of each carrier under the corresponding
configuration while ensuring the network performance. The actually configured carrier power of RF
modules can be less than or equal to the value of Output Power per Carrier (W) in the document.
The power configuration that is not supported in the document may be configurable on the software.
Huawei can only promise the performance with the power configurations listed in the document.

RF Compliance Standards

Table 4-4 RF compliance standards for an AAU5639w (3500 MHz)

Frequency Frequency Item Standard
Band Range
(MHz) (MHz)

3500 3400 to LTE standard 3GPP TS 36.104

3600
NR standard 3GPP TS 38.104
3500 3420 to LTE standard  3GPP TS 36.104
3600  ECC
NR standard  3GPP TS 38.104
 ECC

4.2 AAU5639w (3500 MHz) Antenna Specifications

The antenna specifications include the frequency range, gains, and beam range of the antenna.

Antenna Specifications

Table 4-5 Antenna electrical specifications of an AAU5639w (3500 MHz)

Item Specifications

Frequency Range (MHz) 3400 to 3600/3420 to 3600

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 13

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Item Specifications

Frequency Range (MHz) 3400 to 3600/3420 to 3600

Polarization mode (°) +45 and -45

NR TDD gain (dBi) 25
NR TDD horizontal beam -60 to +60
sweeping range (°)
NR TDD vertical beam sweeping -15 to +15
range (°)
LTE TDD traffic beam gain (dBi) 25
LTE TDD broadcast beam gain 18
(dBi)a
Horizontal half-power beamwidth 65±5
of the LTE TDD broadcast beam
(°)
Vertical half-power beamwidth of ≥ 5.5
the LTE TDD broadcast beam (°)
Number of antenna elements 192
a: The gain is obtained in macro coverage scenarios with the horizontal beamwidth of 65°.

4.3 AAU5639w (3500 MHz) Receiver Sensitivity

The receiver sensitivity of an AAU measures the capability of the AAU to receive signals with
the minimum power.

Table 4-6 Receiver sensitivity of an AAU5639w (3500 MHz)

Frequency Band Frequency Range Receiver Sensitivity
(MHz) (MHz)

3500 3400 to 3600 LTE TDD: -105 dBm

NR TDD: -99 dBm
3500 3420 to 3600 LTE TDD: -105 dBm
NR TDD: -99 dBm

 The LTE TDD receiver sensitivity is measured with the ambient temperature of 25°C (77°F) and test
configurations (QPSK, R = 1/3, 25 RBs) recommended in 3GPP TS 36.141.
 The NR TDD receiver sensitivity is measured with the ambient temperature of 25°C (77°F) and test
configurations (QPSK, R = 1/3, 51 RBs) recommended in 3GPP TS 38.141.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 14

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

4.4 AAU5639w (3500 MHz) Engineering Specifications

The engineering specifications include the dimensions, weight, input power, module power
consumption, and environmental specifications.

Input Power

Table 4-7 Input power of an AAU5639w (3500 MHz)

Power Supply Type Operating Voltage

-48 V DC -36 V DC to -63 V DC

Module Power Consumption

Table 4-8 Power consumption of an AAU5639w (3500 MHz)

Frequency Band Frequency Range Typical Power Consumption (W)a
(MHz) (MHz)

3500 3400 to 3600 749

3500 3420 to 3600 784
a: The typical power consumption of an RF module is measured when the ambient
temperature is 25°C (77°F) and the traffic load reaches 50%. The actual power
consumption has a 10% deviation from this value.

Dimensions and Weight

Table 4-9 Dimensions and weight of an AAU5639w (3500 MHz)

Frequency Band Frequency Range Dimensions (H x Weight
(MHz) (MHz) W x D)

3500 3400 to 3600 730 mm x 395 mm x 27 kg (59.54 lb,

160 mm (28.74 in. x excluding mounting
15.55 in. x 6.30 in.) kits)
3500 3420 to 3600 730 mm x 395 mm x 27 kg (59.54 lb,
160 mm (28.74 in. x excluding mounting
15.55 in. x 6.30 in.) kits)

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 15

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Environmental Specifications

Table 4-10 Environmental specifications of an AAU5639w (3500 MHz)

Item Specifications

Operating Without solar radiation: -40°C to +55°C (-40°F to +131°F)

temperature
Wind load (Assume  Front: 425 N
that the wind speed  Side: 135 N
is 150 km/h.)
Operating wind 150 km/h
speed
Survival wind speed 200 km/h
Relative humidity 5% RH to 100% RH
Atmospheric 70 kPa to 106 kPa
pressure

The output power of an AAU temporarily decreases when it operates at temperature ranges 10°C (50°F)
less than or equal to its maximum rated value. This is dependent on installation scenario, traffic load,
and carrier configuration.

Table 4-11 Surge protection specifications of ports

Port Surge Protection Mode Surge Protection
Specifications

Power port Surge current 20 kA

 Unless otherwise specified, the lightning protection specifications depend on the surge waveform of
8/20 μs.
 All the surge current items, unless otherwise specified as Maximum discharge current, refer to
Nominal discharge current.

Compliance Standards

Table 4-12 Compliance standards for an AAU5639w (3500 MHz)

Item Standard

Operating ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1:

environment "Non-weatherprotected locations"
Storage ETSI EN 300019-1-1 V2.1.4 (2003-04) Class 1.2
environmenta "Weatherprotected, not temperature-controlled storage locations"

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 16

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Item Standard

Shockproof Interim Provisions for Test of Anti-seismic Performances of

protection Telecommunications Equipment
Ingress protection IP65
rating
Surge protection  IEC 62305-1 Protection against lightning - Part 1: General
principles
 IEC 62305-3 Protection against lightning - Part 3: Physical
damage to structures and life hazard
 IEC 62305-4 Protection against lightning - Part 4: Electrical and
electronic systems within structures
 ITU-T K.35 Bonding configurations and earthing at remote
electronic sites
 ITU-T K.56 Protection of radio base stations against lightning
discharges
 ITU-T K.97 Lightning protection of distributed base stations
 ETSI EN 300 253 Environmental Engineering (EE): Earthing
and bonding configuration inside telecommunications centers
 YD/T 2324-2011: Lightning protection requirements and test
methods for radio base stations
 GB 50689-2011: Code for design of lightning protection and
earthing engineering for telecommunication bureaus (stations)
a: The validity period is one year. The product can function properly within the validity
period if the storage environment meets the preceding standards.

4.5 AAU5639w (3500 MHz) CPRI Port Specifications

The CPRI port specifications of an AAU include the CPRI port protocol, rate, and maximum
level of cascading and maximum distance with a BBU.

Table 4-13 CPRI port protocol and rate of an AAU5639w (3500 MHz)
Number of CPRI Protocol Type Port Rate (Gbit/s)
Ports

2 eCPRI 10.3125/25.78125

Table 4-14 Maximum level of cascading and maximum distance between an AAU5639w (3500
MHz) and a BBU
Module Maximum Level Maximum Distance from a BBU
of Cascading with
a BBU

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 17

AAU5639w
Description 4 AAU5639w (3500 MHz) Technical Specifications

Module Maximum Level Maximum Distance from a BBU

of Cascading with
a BBU

AAU5639w Not supported  25 Gbit/s optical module: 10 km (6.21

mi.)
 10 Gbit/s optical module: 20 km (12.43
mi.)

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 18

AAU5639w
Description 5 AAU5639w Installation Overview

5 AAU5639w Installation Overview

This section describes the mounting kits and installation scenarios of an AAU.
7.1 Mounting Kits
7.2 Installation Scenarios
This section describes the information to be known before the AAU installation, which
includes the requirements for the pole where the AAU is installed and installation clearance
requirements.

5.1 Mounting Kits

 The default mechanical downtilt of the AAU is 0°. If a mechanical downtilt of a certain
degree is required, a downtilt supporting arm needs to be configured.
 A bolt on the upper auxiliary bracket and a bolt on the lower auxiliary bracket have been
pre-secured to the upper main bracket and lower main bracket before delivery,
respectively.
 Figure 5-1 shows AAU mounting kits.

Figure 5-1 Mounting kits

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 19

AAU5639w
Description 5 AAU5639w Installation Overview

No. Component Quantity Description

a Upper main bracket 1 Secured to the handle of the AAU.

b Lower main bracket 1 Secured to the handle of the AAU.
c Auxiliary bracket 2 Assembled with the main bracket for
pole-mounted installation.
d M10x150 bolt for 4 Used to assemble a main bracket with an
pole-mounted auxiliary bracket.
installation
e Downtilt supporting 1 Secured to the handle of the AAU. It is
arm used to adjust the mechanical downtilt.

 The following table lists the weights of mounting kits and handles.

Component Weight

Upper and lower mounting kits 2.7 kg (5.95 lb)

Downtilt supporting arm 1.3 kg (2.87 lb)
Upper and lower handles (including 1.2 kg (2.65 lb)
attachment plates)

5.2 Installation Scenarios

This section describes the information to be known before the AAU installation, which
includes the requirements for the pole where the AAU is installed and installation clearance
requirements.

5.2.1 Requirements for the Pole Where the AAU Is Installed

An AAU can be installed on a pole on the rooftop or tower.

Restrictions
To ensure safety performance such as heat dissipation and waterproof of an AAU, the
installation scenario must meet certain requirements. If the installation scenario does not meet
the requirements, contact Huawei engineers for evaluation.
 An AAU cannot be installed in an enclosed camouflage box or a camouflage cover.
 An AAU cannot be installed behind a device that can generate an electromagnetic field,
such as a motor.
 An AAU cannot be installed near an air vent that generates heat, such as an air
conditioner air vent or chimney vent.
 An AAU can only be installed on a pole that is vertical to the ground. It cannot be
installed on a diagonal pole or a horizontal pole.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 20

AAU5639w
Description 5 AAU5639w Installation Overview

 In general, no further beautification (for example, coating) is allowed to avoid affecting

the device performance.
 An AAU is a professional communication device and cannot be installed in areas that are
easily accessible to common people. The installation scenario involves security-related
features. For details about the requirements and precautions, see Security Information.

Installation Scenario Description

An AAU can be installed on a pole secured on a rooftop or tower, as shown in the following
figure.

Figure 5-2 AAU installed on a pole

Requirements for the Pole

The following table describes the requirements for the pole.

Table 5-1 Requirements for the pole

Installation Pole Pole Pole Load Number Pole
Scenario Diameter (Φ) Wall Bearing of AAUs Heightc
Thicknes Capacity
s

AAU 70 mm ≤ Φ ≤ 4 mm 300 kg 1 ≥ 1500 mm

installed on 100 mm (2.76 (0.16 in.) (661.50 lb) (59.06 in.)
the main in. ≤ Φ ≤ 3.94
polea in.)
100 mm ≤ Φ ≤ 4 mm 300 kg 2
114 mm (3.94 (0.16 in.) (661.50 lb)
in. ≤ Φ ≤ 4.49
in.)

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 21

AAU5639w
Description 5 AAU5639w Installation Overview

Installation Pole Pole Pole Load Number Pole

Scenario Diameter (Φ) Wall Bearing of AAUs Heightc
Thicknes Capacity
s

AAU 50 mm ≤ Φ ≤ 4 mm 300 kg 1 ≥ 1000 mm

installed on 60 mm (1.97 (0.16 in.) (661.50 lb) (39.37 in.)
the auxiliary in. ≤ Φ ≤ 2.36
poleb in.)
60 mm ≤ Φ ≤ 3 mm 300 kg 1
114 mm (2.36 (0.12 in.) (661.50 lb)
in. ≤ Φ ≤ 4.49
in.)
a: When the AAU is installed on a main pole, the bottom of the pole must be secured on a
support.
b: When the AAU is installed on an auxiliary pole, both the pole top and bottom must be
secured on the main pole or the tower.
c: The pole height refers to the minimum length of a pole required for installing an AAU.

Figure 5-3 and Figure 5-4 show AAUs installed on main poles and auxiliary poles,
respectively.

Figure 5-3 Main pole scenario

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 22

AAU5639w
Description 5 AAU5639w Installation Overview

Figure 5-4 Auxiliary pole scenario

5.2.2 Installation Clearance Requirements

This section describes the clearance requirements for installing an AAU.
Figure 5-5 shows the clearance requirements and Figure 5-6 shows the reference installation
dimensions when no blocking exists between the AAU and a passive antenna.

The following installation distances meet the isolation requirements of different antennas. If the
installation space is limited and blocking exists between antennas, contact local Huawei engineers.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 23

AAU5639w
Description 5 AAU5639w Installation Overview

Figure 5-5 AAU installation clearance requirements

After the downtilt supporting arm is installed, the dimensions when there is no mechanical downtilt
adjustment are the same as those in Figure 5-6.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 24

AAU5639w
Description 5 AAU5639w Installation Overview

Figure 5-6 AAU installation dimensions for reference

Keep the area within 2 m (6.56 ft) away from the AAU front panel clear of any metal barriers
to ensure the AAU coverage, as shown by dotted lines in the side view and top view in Figure
5-7.

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 25

AAU5639w
Description 5 AAU5639w Installation Overview

Figure 5-7 Impact scope for AAU coverage

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 26

AAU5639w
Description 6 Acronyms and Abbreviations

6 Acronyms and Abbreviations

Table 6-1 Acronyms and abbreviations

Acronym or Abbreviation Full Name

AAS active antenna system

AAU active antenna unit
BBU baseband unit
CPRI common public radio interface
EIRP equivalent isotropically radiated power
EIRS equivalent isotropic receiver sensitivity
LTE Long Term Evolution
MBB mobile broadband
RRU radio remote unit
3GPP 3rd Generation Partnership Project

Issue 01 (2020-03-30) Copyright © Huawei Technologies Co., Ltd. 27