Technical data sheet DR24A-SR-7
Rotary actuator for butterfly valves
• Torque motor Max. 90 Nm
• Nominal voltage AC/DC 24 V
• Control modulating
Picture may differ from product
Technical data
Electrical data Nominal voltage AC/DC 24 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2...28.8 V / DC 19.2...28.8 V
Power consumption in operation 9W
Power consumption in rest position 2W
Power consumption for wire sizing 12 VA
Connection supply / control Cable 1 m, 4x 0.75 mm²
Parallel operation Yes (note the performance data)
Functional data Torque motor Max. 90 Nm (not constant)
Operating range Y 2...10 V
Position feedback U note Max. 1 mA
Manual override with push-button, can be locked
Running time motor 150 s / 90°
Sound power level, motor 45 dB(A)
Position indication Mechanical, integrated
Safety data Protection class IEC/EN III, Safety Extra-Low Voltage (SELV)
Power source UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2
Housing UL Enclosure Type 2
EMC CE according to 2014/30/EU
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
UL Approval cULus according to UL60730-1A, UL60730-2-14
and CAN/CSA E60730-1
The UL marking on the actuator depends on
the production site, the device is UL-compliant
in any case
Type of action Type 1
Rated impulse voltage supply / control 0.8 kV
Pollution degree 3
Ambient humidity Max. 95% RH, non-condensing
Ambient temperature -30...50°C [-22...122°F]
Storage temperature -40...80°C [-40...176°F]
Servicing maintenance-free
Mechanical data Connection flange F07
www.belimo.com DR24A-SR-7 • en-gb • 2025-05-21 • Subject to change 1/4
Technical data sheet DR24A-SR-7
Technical data
Weight Weight 3.7 kg
Safety notes
• This device has been designed for use in stationary heating, ventilation and air-conditioning
systems and must not be used outside the specified field of application, especially in aircraft
or in any other airborne means of transport.
• Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or
aggressive gases interfere directly with the device and that it is ensured that the ambient
conditions remain within the thresholds according to the data sheet at any time.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied with during installation.
• The switch for changing the direction of rotation may not be adjusted.
• The angle of rotation is not permitted to be subjected to mechanical limitation. It is
forbidden to alter the mechanical end stops.
• The device may only be opened at the manufacturer's site. It does not contain any parts that
can be replaced or repaired by the user.
• Cables must not be removed from the device.
• The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.
• Because of its non-constant torque, the actuator is neither suitable nor released for
motorisation with valves from other manufacturers. No legal entitlement can be claimed,
even after extensive testing. Belimo will not be held liable and will provide no warranty.
Product features
Operating mode The actuator is controlled with a control signal Y (note the operating range) and drives to the
position defined by the control signal. Measuring voltage U serves for the electrical display of
the valve position 0...100% and as control signal for other actuators.
Simple direct mounting Simple direct mounting on the butterfly valve. The mounting orientation in relation to the
butterfly valve can be selected in 90° (angle) increments.
Manual override Manual override with push-button possible (the gear train is disengaged for as long as the
button is pressed or remains locked).
High functional reliability The actuator is overload protected, requires no limit switches and automatically stops when
the end stop is reached.
Torque not constant Due to the non-linear torque characteristic the actuator can only be used for butterfly valves
and not for other armatures.
www.belimo.com DR24A-SR-7 • en-gb • 2025-05-21 • Subject to change 2/4
Technical data sheet DR24A-SR-7
Accessories
Electrical accessories Description Type
Auxiliary switch 1x SPDT add-on S1A
Auxiliary switch 2x SPDT add-on S2A
Feedback potentiometer 140 Ω add-on P140A
Feedback potentiometer 1 kΩ add-on P1000A
Feedback potentiometer 10 kΩ add-on P10000A
Electrical installation
Supply from isolating transformer.
Parallel connection of other actuators possible. Observe the performance data.
Wire colours:
1 = black
2 = red
3 = white
5 = orange
www.belimo.com DR24A-SR-7 • en-gb • 2025-05-21 • Subject to change 3/4
Technical data sheet DR24A-SR-7
Dimensions
Further documentation
• The complete product range for water applications
• Data sheets for butterfly valves
• Installation instructions for actuators and/or butterfly valves
• General notes for project planning
www.belimo.com DR24A-SR-7 • en-gb • 2025-05-21 • Subject to change 4/4
