VALVES 2

3/2
Series
pressure operated
S398
3 1
U
stainless steel body 2

with socket welding ends PN40, DN 15 to 50 3 1

FEATURES
• Ruggedly built valve, particularly recommended for use with steam, superheated
water, corrosive fluids
• High-performance, maintenance-free stuffing box, resistant to thermal shock
• Mixer function (two pressure inlets at 1 or 3, one outlet at 2) or distributor function
(one pressure inlet at 2, two outlets at 1 and 3)
• Vacuum operation up to 10-2 mbar
• Allowable backpressure: up to 40 bar
• Optical position indicator as standard
• Autoclavable valve for use at high ambient temperatures (up to 180°C)
• The valves satisfy Pressure Equipment Directive 2014/64/EU
• The valves in conformity with IEC 61508 Standard (2010 route 2H version) certi-
fied with integrity levels: SIL 2 for HFT = 0
GENERAL
Differential pressure 0 to 40 bar [1 bar =100 kPa]
Maximum allowable pressure 40 bar (within the specified limits, see diagram I)
Ambient temperature range -25°C to +180°C
Maximum viscosity 5000 cSt (mm2/s)
Pilot fluid Air
Max. pilot pressure 10 bar
Min. pilot pressure See below
fluids () temperature range disc seal ()

DN 15-20-25: air and gas groups 1 & 2

DN 32-40-50: air and gas group 2 - 10°C to + 250°C bronze PTFE
all DN: water, oil, liquids groups 1 & 2 and steam
mixer function distributor function
P (bar) (3ô2) (1ô2) P (bar) (2ô1) (2ô3 )
10 10
Minimum pilot pressure

4,6 4,7-DN 20 4,6

F
3,6-DN 50
3,9-DN 50 25
3,4-DN 40
3,4 3,5-DN 25-40 3,4
3,2-DN32 3,3-DN 20
3,0-DN15
DN 20-2,4
3,1-DN15
2,4-DN 20 DN 20-2,2
2,9-DN32
2,4-DN 20
1 2
DN 15-1,7 1,7-DN 15 DN 15-1,5 1,7-DN 15
DN 32-1,4 1,4-DN32 32 1,5-DN50
DN 50-1,3 1,3-DN 25 DN 50-1,1 1,4-DN32
DN 25-1,1 1 1,2-DN 50
DN 25-0,8 1,3-DN 25
DN 40-0,6 0,7-DN 40 0,75-DN 40
3
DN 40-0,3
0 10 20 30 40 0 10 20 30 40
p (bar) p (bar)

CONSTRUCTION
Socket welding ends EN 12760
MATERIALS IN CONTACT WITH FLUID
() Ensure that the compatibility of the fluids in contact with the materials is verified P (bar)
Availability, design and specifications are subject to change without notice. All rights reserved.

Body and plug Stainless steel 40 40 diagram I

Stuffing box housing Stainless steel
max. pressure

Stem, disc Stainless steel

Stuffing box packing PTFE chevrons 24
21
20
Disc seal Bronze PTFE
Valve body seal Graphite
t (°C)
OTHER MATERIALS 100 233 250
Operator Aluminium, nickel plated fluid temperature
SPECIFICATIONS
flow coefficient
Kv pilot operating
ext. pipe operator
DN mixer distributor pressure pressure
diameter diameter catalogue number
(bar) differential
3 2 1 2 2 3 2 1
(mm) (m3/h) (l/min) (m3/h) (l/min) (m3/h) (l/min) (m3/h) (l/min) min. max. (bar) (mm)
U - Universal
15 22,4 3,3 54 4,4 73 3,5 59 4,6 78 ❉ 10 40 80 S398A001
20 27,7 8,0 133 7,4 123 8,1 136 7,7 129 ❉ 10 40 100 S398A002
25 34,5 11,4 190 11,6 194 12,1 203 11,9 199 ❉ 10 40 100 S398A003
00181GB-2016/R01

32 43,2 18,9 316 16,6 278 17,9 299 16,6 278 ❉ 10 40 150 S398A004
40 49,5 27 450 27 450 27 450 27 450 ❉ 10 40 150 S398A005
50 62 51 850 51 850 51 850 51 850 ❉ 10 40 200 S398A006
❉ Minimum pilot pressure varies with differential pressure. See piloting chart above.

All leaflets are available on: www.asconumatics.eu

V755-1
 VALVES SERIES S398
OPTIONS AND ACCESSORIES
• Metal-to-metal sealing disc
• Signaling box, with mechanical or inductive contacts
• Low temperature: ambient -55°C to +70°C and fluid -55°C to +70°C
• ATEX 2014/34/EU versions for potentially explosive atmospheres, categories 2 GD and 3 GD
• 2 switches, Ex d protection, mounted on valve with 2 Crouzet contacts type 83101-I-W1, for use in ambient temperatures from -20°C to +80°C:
suffix SD2 [Contact us for option with 1 Honeywell contact type 1HS1 (-55°C to +82°C) or 1 Crouzet contact (-20°C to +80°C).]
• Valve seat leakage class VI as defined by FCI 70-2, contact us
• Other pipe connections are available on request

INSTALLATION
• The valves can be mounted in any position without affecting operation
• Compatible with ASTM 1, 2 and 3 oils
• Check temperature range of valve body and solenoid pilot valves for suitability. For probability of failure, contact us
• The socket welding ends are according to EN 12760
• Pipe connections (G*) have standard thread according to ISO 228/1 and ISO 7/1. Pipe connections (G) have standard thread
according to ISO 228/1
• Installation/maintenance instructions are included with each valve

SPARE PARTS KITS ORDERING EXAMPLES:

catalogue spare parts kit no. S 398 A 003
number piston seal actuator spring stem, disc, seals S 398 A 006
S398A001 C140233 C140299 C140323
S398A002 C140234 C140301 C140324 ext. pipe thread
S398A003 C140234 C140303 C140325
S398A004 C140235 C140305 C140326 basic number
S398A005 C140235 C140307 C140327
S398A006 C140298 C140309 C140328 ORDERING EXAMPLES KITS:
C140233
DIMENSIONS (mm), WEIGHT (kg) C140298
C140303
TYPE 01-02-03-04
Prefix "S"
basic number

ØF1
D

1
C

F F
Ø AA

1 2
ØH

Availability, design and specifications are subject to change without notice. All rights reserved.
ØA
Q

3
F

Ø AA
E
= =

ØB
ØP
1 Optical position indicator

operator
type DN ØA ØAA ØB C D E F ØF1 ØH ØP Q weight
diameter
01 15 80 15 22,4 110 203,1 151,6 85 9,5 G 1/8 33 95 51,5 1,87
20 100 20 27,7 132,5 229,2 170,9 110 11 G 1/8 40 117 58,3 3,51
00181GB-2016/R02

02
25 100 25 34,5 132,5 244,9 180,9 120 12,5 G 1/8 46 117 64 4,23
32 150 32 43,2 191 318,2 237,2 145 14,5 G* 1/4 57 172,5 81 9,37
03
40 150 40 49,5 191 361,7 259,2 150 16 G* 1/4 65 172,5 102,5 11,9
04 50 200 50 62 247 436 328,5 190 17,5 G* 1/4 75 230 107,5 23,66

All leaflets are available on: www.asconumatics.eu

755-2