Digital Control Liquid Filling Machine

Instruction manual

Please kindly read this manual carefully before using. This item belong to electrical
appliance, please pay attention to the safety of electricity.
If there is any question, please feel free to contact us.
Email: [email protected]
WhatsApp: + 86 13858537324 (Blanche Hanchen)
 Introduction

Weighing liquid filling machine uses a microcomputer to control the

water pump to suck liquid, electric scale real-time monitors the weight

and feedback to the microcomputer. If the weight has reached, it will

immediately stop sucking, and the error is about ±1g. It is widely used

in medicine, chemical, food, beverage, wine, cosmetics and other

industries. It is suitable for liquid dispensing without particles and small

batch production. The pump body is made of a variety of

corrosion-resistant imported materials. The pump body and the motor

are separated. It has the functions of oil resistance, acid resistance, alkali

resistance, corrosion resistance, and chemical resistance. This water

pump combines the advantages of self-priming pumps and chemical

pumps, with self-priming function, resistance to protection, stable

operation, and long-term continuous load work.

Performance characteristics of filling machine

1. High quality STM32 single chip microcomputer control, high efficiency,

strong stability, low power consumption, fast speed.

2. Automatic counting function, effective control of filling number.

3. LCD large screen, full English display is more suitable for users, and the

panel operation is convenient and simple.

4. With weight control, quantitative filling is more accurate and

5. Wide voltage range.

6. The product has stable performance and long service life.

7. With self-priming function, no need to pour liquid into the pump

when starting.

8. Pump body is acid and alkali resistant.

9. The nozzle is designed to prevent dripping, so there is no need to

worry about leakage.

10. Reasonable structure design, 304 stainless steel shell, solid inside and

beautiful outside.

11. With power-off memory function.

NOTE: Please make sure your power supply is safely grounded! Or it will

may cause safety danger.

Description of filling machine panel

Connect the power cord, the panel will display the company information

and machine model, and enter the standby mode after 3 seconds.

1. QTY: filling times

2. Flow: filling speed

3. Fix: set filling weight

4. Real: real weight

6. Long press “Zero/Cleaning” 3 s to clear counting number “QTY”.

7. Press “Continuous/Inching” to switch working mode.

Inching mode: under running status, press the pedal to fill.

Continuous mode: press “On/Off” to switch to running status, put bottle

on the weigh pan, the interval will start timing and start filling when time

up. Machine will stop when the set weight is reached. If there is no

bottle on the weigh pan, the machine won’t start filling.

8. Choose Inching mode, press “On/Off” to switch to running status,

press pedal to fill, or press “Continuous/Inching” to fill.

9. Long press “<” 3 s to enter speed reduction parameter setting

interface. Adjust speed reduction setting according to liquid, filling speed,

and filling amount, so as to prevent liquid from being poured out due to

too fast filling speed.

10. Long press “>” 3 s to enter weigh calibration interface, ensure that

the “sense value” is ZERO, then put a 1000g weight on the weighing pan

to calibrate, press “Parameter set” to save and exit. Refer to pic 3.

11. Long press “+” 3 s to switch between weighing filling mode and flow

filling mode. Refer to pic 4.

Parameter setting of filling machine

1. Press the "parameter setting" key, the LCD screen will display a
3
flashing cursor. The flashing position is the currently adjustable

parameter. Press the "<” or “ >” key to move the cursor, and press the “-”

or "+" key to adjust the parameter.

2. Tare function: “YES” is filling after tare, “NO” is filling without tare.

Refer to pic 5.

3. Filling speed adjustment range: 01-99, the larger the value, the faster

the flow rate. If the value is too low, it will automatically adjust to 18.

4. Weight set range: 30-9999g (The specific value depends on the

machine model the recommended minimum setting value is 30g). When

the filling weight is reach, the machine will automatically stop. Refer to

pic 5.

5. Set intervals: The countdown time after take away the bottle on the

weigh pan. When time is over, the machine will start filling. User can set

the interval time as your needs. This setting is only valid under

continuous mode. Refer to pic 5, 6.

6. There will be a little error at first filling, the second time the machine

will automatically adjust the error according to the last error value.

4
 Liquid calibration of filling machine (before calibration, the air in
the water pipe should be emptied to make the water pipe full of liquid)

1. Weighing filling mode (g): Long press “>” 3 s to enter weigh

calibration interface, ensure that the “sense value” is ZERO, then put a

1000g weight on the weighing pan to calibrate, press “Parameter set” to

save and exit. Refer to pic 3.

2. Flow mode calibration (ml): put an measuring cup under the water

outlet, long press the “Parameter set” to enter “weight calibration”

interface. The screen display as pic 7. Press the "On/Off" button to start

calibration, and the screen displays "filling”, as shown in pic 8. Press the

"On/Off" button to stop filling after the filling amount is approximately

the amount needed by the user, and read the value on the measuring

cup, input it into the panel. Refer to pic 9. Press the "parameter set" key

to exit the calibration.

Pic 1

5
 Pic 2 Pic 3

Pic 4 Pic 5 (Continuous mode)

Pic 6 (Inching mode)

6
 Pic 7 Pic 8

Pic 9

Maintenance

It is necessary to clean up the impurities in the filter regularly, and the

serious blockage will affect the accuracy of filling measurement. If it is

found that the water pump can run without water or the flow rate

becomes very small, it may be that the impurities enter into the pump

body. Open the pump body, check whether there are impurities in the

pump cavity, clean up the blockage, and tighten the screw of the pump

chamber. Non professional personnel, please do not disassemble the

machine without authorization. If there is strong electricity in the

7
machine, please ask professional certified electrical personnel to

dismantle the machine for maintenance. During the maintenance period,

the maintenance precautions must be strictly observed, otherwise the

safe operation of the machine cannot be guaranteed.