MEC 131

Stress Analysis
LECTURE (11)

Stress Strain
Transformation

Dr. Mohamed Farghal …. Loading ….

1-1 Dr/ Mohamed Farghal Lecture (11) MEC131

 Transformations of Stress and Strain
Introduction
Transformation of Plane Stress
Principal Stresses
Maximum Shearing Stress
Example 7.01
Sample Problem 7.1
Mohr’s Circle for Plane Stress
Example 7.02
Sample Problem 7.2
General State of Stress
Application of Mohr’s Circle to the Three- Dimensional Analysis of Stress
Yield Criteria for Ductile Materials Under Plane Stress
Fracture Criteria for Brittle Materials Under Plane Stress
Stresses in Thin-Walled Pressure Vessels

1-2 Dr/ Mohamed Farghal Lecture (11) MEC131

 Introduction
• The most general state of stress at a point may
be represented by 6 components,
 x , y , z normal stresses
 xy ,  yz ,  zx shearing stresses
(Note :  xy   yx ,  yz   zy ,  zx   xz )

• Same state of stress is represented by a

different set of components if axes are rotated.

• The first part of the chapter is concerned with

how the components of stress are transformed
under a rotation of the coordinate axes. The
second part of the chapter is devoted to a
similar analysis of the transformation of the
components of strain.

Dr/ Mohamed Farghal Lecture (11)

1-3
MEC131
 Introduction
• Plane Stress - state of stress in which two faces of
the cubic element are free of stress. For the
illustrated example, the state of stress is defined by
 x ,  y ,  xy and  z   zx   zy  0.

• State of plane stress occurs in a thin plate subjected

to forces acting in the midplane of the plate.

• State of plane stress also occurs on the free surface

of a structural element or machine component, i.e.,
at any point of the surface not subjected to an
external force.
Dr/ Mohamed Farghal Lecture (11)
1-4
MEC131
 Transformation of Plane Stress
• Consider the conditions for equilibrium of a
prismatic element with faces perpendicular to
the x, y, and x’ axes.
 Fx  0   xA   x A cos  cos   xy A cos sin
  y A sin sin   xy A sin  cos
 Fy  0   xyA   x A cos sin   xy A cos  cos
  y A sin  cos   xy A sin sin

• The equations may be rewritten to yield

 x  y  x  y
 x   cos 2   xy sin 2
2 2
 x  y  x  y
 y   cos 2   xy sin 2
2 2
 x  y
 xy   sin 2   xy cos 2
2
Dr/ Mohamed Farghal Lecture (11)
1-5
MEC131
 Principal Stresses
• The previous equations are combined to
yield parametric equations for a circle,

 x   ave 2   x2y  R 2
where
2
 x  y  x  y 
 ave  R      xy
2
2  2 

• Principal stresses occur on the principal

planes of stress with zero shearing stresses.
2
 x  y  x  y 
 max,min       xy
2
2  2 
2 xy
tan 2 p 
 x  y
Note : defines two angles separated by 90o
Dr/ Mohamed Farghal Lecture (11)
1-6
MEC131
 Maximum Shearing Stress
Maximum shearing stress occurs for  x   ave

2
 x  y 
 max  R      xy
2
 2 
 x  y
tan 2 s  
2 xy

Note : defines two angles separated by 90o and

offset from p by 45o
 x  y
    ave 
2

1-7 Dr/ Mohamed Farghal Lecture (11) MEC131

 Mohr’s Circle for Plane Stress
• With the physical significance of Mohr’s circle
for plane stress established, it may be applied
with simple geometric considerations. Critical
values are estimated graphically or calculated.

• For a known state of plane stress  x , y , xy

plot the points X and Y and construct the
circle centered at C.
2
 x  y  x  y 
 ave  R      xy
2
2  2 
• The principal stresses are obtained at A and B.
 max,min   ave  R
2 xy
tan 2 p 
 x  y
The direction of rotation of Ox to Oa is
the same as CX to CA.
1-8 Dr/ Mohamed Farghal Lecture (11) MEC131
 Mohr’s Circle for Plane Stress
• With Mohr’s circle uniquely defined, the state
of stress at other axes orientations may be
depicted.

• For the state of stress at an angle  with

respect to the xy axes, construct a new
diameter X’Y’ at an angle 2 with respect to
XY.

• Normal and shear stresses are obtained

from the coordinates X’Y’.

Dr/ Mohamed Farghal Lecture (11)

1-9
MEC131
 Mohr’s Circle for Plane Stress
• Mohr’s circle for centric axial loading:

P P
x  ,  y   xy  0  x   y   xy 
A 2A

• Mohr’s circle for torsional loading:

Tc Tc
 x   y  0  xy  x y   xy  0
J J
Dr/ Mohamed Farghal Lecture (11)
1 - 10
MEC131
 Example 7.01
SOLUTION:
• Find the element orientation for the principal
stresses from
2 xy
tan 2 p 
 x  y
• Determine the principal stresses from
2
x  y  x  y 
 max, min       xy
2
For the state of plane stress shown, 2  2 
determine (a) the principal panes, • Calculate the maximum shearing stress with
(b) the principal stresses, (c) the 2
maximum shearing stress and the   x   y 
 max      xy
2
corresponding normal stress.  2 
x  y

 
2

Dr/ Mohamed Farghal Lecture (11)

1 - 11
MEC131
 Example 7. 1
SOLUTION:
• Find the element orientation for the principal
stresses from
2 xy 2 40
tan 2 p    1.333
 x  y 50   10
2 p  53.1, 233.1
 p  26.6, 116 .6
 x  50 MPa  xy  40 MPa
 y  10 MPa • Determine the principal stresses from
2
x  y  x  y 
 max, min       xy
2
2  2 
 20  302  402
 max  70 MPa
 min  30 MPa
Dr/ Mohamed Farghal Lecture (11)
1 - 12
MEC131
 Example 7. 1
• Calculate the maximum shearing stress with
2
 x  y 
 max      xy
2
 2 
 302  402
 max  50 MPa
 x  50 MPa  xy  40 MPa  s   p  45
 y  10 MPa  s  18.4, 71.6

• The corresponding normal stress is

x  y 50  10
    ave  
2 2
   20 MPa

1 - 13 Dr/ Mohamed Farghal Lecture (11) MEC131

 Example 7. 1

For the state of plane stress shown,

(a) construct Mohr’s circle, determine
(b) the principal planes, (c) the SOLUTION:
principal stresses, (d) the maximum • Construction of Mohr’s circle
shearing stress and the corresponding
 ave 
x  y

50   10  20 MPa
normal stress.
2 2
CF  50  20  30 MPa FX  40 MPa
R  CX  302  402  50 MPa
Dr/ Mohamed Farghal Lecture (11)
1 - 14
MEC131
 Example 7.01
• Principal planes and stresses
 max  OA  OC  CA  20  50
 max  70 MPa
 max  OB  OC  BC  20  50
 max  30 MPa

FX 40
tan 2 p  
CP 30
2 p  53.1
 p  26.6

Dr/ Mohamed Farghal Lecture (11)

1 - 15
MEC131
 Example 7.01

• Maximum shear stress

 s   p  45  max  R     ave

 s  71.6  max  50 MPa    20 MPa
Dr/ Mohamed Farghal Lecture (11)
1 - 16
MEC131
 Sample Problem 7.1
SOLUTION:
• Determine an equivalent force-couple
system at the center of the transverse
section passing through H.
• Evaluate the normal and shearing stresses
at H.
• Determine the principal planes and
calculate the principal stresses.
A single horizontal force P of 150 lb
magnitude is applied to end D of lever
ABD. Determine (a) the normal and
shearing stresses on an element at point
H having sides parallel to the x and y
axes, (b) the principal planes and
principal stresses at the point H.
1 - 17 Dr/ Mohamed Farghal Lecture (11) MEC131
 Sample Problem 7.1
SOLUTION:
• Determine an equivalent force-couple
system at the center of the transverse
section passing through H.
P  150 lb
T  150 lb 18 in   2.7 kip  in
M x  150 lb 10 in   1.5 kip  in

• Evaluate the normal and shearing stresses

at H.
y 
Mc

1.5 kip  in 0.6 in 
I 1  0.6 in 4
4

 xy  
Tc

2.7 kip  in 0.6 in 
J 1  0.6 in 4
2

 x  0  y  8.84 ksi  y  7.96 ksi

1 - 18 Dr/ Mohamed Farghal Lecture (11) MEC131

 Sample Problem 7.1
• Determine the principal planes and
calculate the principal stresses.
2 xy 27.96
tan 2 p    1.8
 x  y 0  8.84
2 p  61.0,119 
 p  30.5, 59.5

2
x  y  x   y 
 max, min       xy
2
2  2 
2
0  8.84  0  8.84 
  7.96 
2
  
2  2 
 max  13.52 ksi
 min  4.68 ksi

1 - 19 Dr/ Mohamed Farghal Lecture (11) MEC131

 Sample Problem 7.2

For the state of stress shown,

determine (a) the principal planes
and the principal stresses, (b) the
stress components exerted on the
element obtained by rotating the SOLUTION:
given element counterclockwise • Construct Mohr’s circle
through 30 degrees.  x   y 100  60
 ave    80 MPa
2 2
R CF 2  FX 2  202  482  52 MPa
Dr/ Mohamed Farghal Lecture (11)
1 - 20
MEC131
 Sample Problem 7.2

• Principal planes and stresses

XF 48  max  OA  OC  CA  max  OA  OC  BC
tan 2 p    2.4
CF 20  80  52  80  52
2 p  67.4
 max  132 MPa  min  28 MPa
 p  33.7 clockwise
Dr/ Mohamed Farghal Lecture (11)
1 - 21
MEC131
 Sample Problem 7.2

  180  60  67.4  52.6

• Stress components after rotation by 30o
 x  OK  OC  KC  80  52 cos 52.6
Points X’ and Y’ on Mohr’s circle that  y  OL  OC  CL  80  52 cos 52.6
correspond to stress components on the
 xy  KX   52 sin 52.6
rotated element are obtained by rotating
XY counterclockwise through 2  60  x  48.4 MPa
 y  111 .6 MPa
 xy  41.3 MPa
Dr/ Mohamed Farghal Lecture (11)
1 - 22
MEC131
 Sample Problem
• Calculate principal stresses and maximum
shearing stress.
Determine principal planes.

 max  R  33.02  17.522  37.4 MPa

 max  OC  R  33.0  37.4  70.4 MPa
 min  OC  R  33.0  37.4  7.4 MPa
CY 17.52
tan 2 p   2 p  27.96
CD 33.0
 p  13.98

 max  37.4 MPa

 max  70.4 MPa
 min  7.4 MPa
 p  13.98
Dr/ Mohamed Farghal Lecture (11)
1 - 23
MEC131
Stresses in Thin-Walled Pressure Vessels
• Cylindrical vessel with principal stresses
1 = hoop stress
2 = longitudinal stress

• Hoop stress:
 Fz  0  12t x   p2r x 
pr
1 
t

• Longitudinal stress:
 
 Fx  0   2 2 rt   p  r
2

pr
2 
2t
 1  2 2

Dr/ Mohamed Farghal Lecture (11)

7 - 24
MEC131
Stresses in Thin-Walled Pressure Vessels
• Spherical pressure vessel:
pr
1   2 
2t

• Mohr’s circle for in-plane

transformations reduces to a point
  1   2  constant
 max(in -plane)  0

• Maximum out-of-plane shearing

stress
pr
 max  12 1 
4t

Dr/ Mohamed Farghal Lecture (11)

7 - 25
MEC131
 Transformation of Plane Strain
• Plane strain - deformations of the material
take place in parallel planes and are the
same in each of those planes.

• Plane strain occurs in a plate subjected

along its edges to a uniformly distributed
load and restrained from expanding or
contracting laterally by smooth, rigid and
fixed supports
components of strain :
 x  y  xy  z   zx   zy  0
• Example: Consider a long bar subjected
to uniformly distributed transverse loads.
State of plane stress exists in any
transverse section not located too close to
the ends of the bar.
Dr/ Mohamed Farghal Lecture (11)
1 - 26
MEC131
 Transformation of Plane Strain
• State of strain at the point Q results in
different strain components with respect
to the xy and x’y’ reference frames.
     x cos 2    y sin 2    xy sin  cos

 OB   45  12  x   y   xy 
 xy  2 OB   x   y 

• Applying the trigonometric relations

used for the transformation of stress,
x   y x   y  xy
 x   cos 2  sin 2
2 2 2
x   y x   y  xy
 y   cos 2  sin 2
2 2 2
 xy x   y  xy
 sin 2  cos 2
2 2 2
Dr/ Mohamed Farghal Lecture (11)
1 - 27
MEC131
 Mohr’s Circle for Plane Strain
• The equations for the transformation of
plane strain are of the same form as the
equations for the transformation of plane
stress - Mohr’s circle techniques apply.

• Abscissa for the center C and radius R ,

2 2
x   y   x   y    xy 
 ave  R      
2  2   2 

• Principal axes of strain and principal strains,

 xy
tan 2 p 
x   y
 max   ave  R  min   ave  R

• Maximum in-plane shearing strain,

 max  2 R   x   y 2   xy2
Dr/ Mohamed Farghal Lecture (11)
1 - 28
MEC131
 Measurements of Strain: Strain
Rosette
• Strain gages indicate normal strain through
changes in resistance.

• With a 45o rosette, x and y are measured

directly. xy is obtained indirectly with,
 xy  2OB   x   y 

• Normal and shearing strains may be

obtained from normal strains in any three
directions,
1   x cos2 1   y sin 2 1   xy sin 1 cos1

 2   x cos 2  2   y sin 2  2   xy sin  2 cos 2

 3   x cos2 3   y sin 2 3   xy sin 3 cos3

Dr/ Mohamed Farghal Lecture (11)
1 - 29
MEC131