Scribd
Upload
34 views1 page

ASACLEAN newEX Grade Is Most Powerful Glass Filled Mechanical Purging Compound Optimized For Injection Molding and Extrusion at 200-330 °C.

The newEX Grade is a mechanical purging compound designed for injection molding and extrusion, effective in removing carbon contamination and facilitating fast color/material changes. It is available in 25kg bags and can be used with most commodity and engineering resins within a temperature range of 200℃ to 330℃. Key features include a specific gravity of 1.37-1.57, a softening point of 130℃, and it is stable and non-reactive under normal handling conditions.

Uploaded by

sales-p5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views1 page

ASACLEAN newEX Grade Is Most Powerful Glass Filled Mechanical Purging Compound Optimized For Injection Molding and Extrusion at 200-330 °C.

The newEX Grade is a mechanical purging compound designed for injection molding and extrusion, effective in removing carbon contamination and facilitating fast color/material changes. It is available in 25kg bags and can be used with most commodity and engineering resins within a temperature range of 200℃ to 330℃. Key features include a specific gravity of 1.37-1.57, a softening point of 130℃, and it is stable and non-reactive under normal handling conditions.

Uploaded by

sales-p5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA SHEET

Purging compound

newEX Grade
Mechanical Purging Compound for Injection Molding & Extrusion

Packaging Description & Benefits


⚫ Most powerful grade available
* Glass fiber contained
⚫ Effectively remove carbon contamination
⚫ Fast color/material change
⚫ Peels off easily during screw pulls
⚫ Mechanical purge (No chemical reaction)
newEX Grade is available in : ⚫ Not available for sealing
25kg bags (pictured above)
Usage Information
Temperature Range: 200℃ to 330℃
Injection Molding - NOT available for hot runner
Applicant: Extrusion - compounding, profile
Screw pulls
Most commodity and engineering resins within the
Types of Resin:
processing temperature range.
PICTURED: Close-up of newEX Grade Typically 1-2 system capacities
Amount of Purge:
(actual amount depends on degree of contamination)
Product Safety Make sure to remove the screen packs when using newEX
Minimum Clearance:
grade.
Refer to SDS
for more information Soak Time: Not required
* Detailed instruction may vary to optimize your purging process.

Key Measurements Physical & Chemical Properties


Specific Gravity 1.37～1.57 Pellet color: Milky white – light yellow
Base resin: Styrenic resin
Softening Point 130℃
Inorganic additives: More than 40% (Including Glass-fiber)
Stability: Stable under normal temperatures
Visit our website
for Reactivity: Non-reactive under normal handling and storage conditions
・News/Events
Do not exceed recommended temperature range.
・SDS
・Training videos Conditions to avoid: Do not allow ASACLEAN newEX Grade to reside in barrel for
ANY period of time at ANY temperature.
https://www.asahi-kasei.co.jp/asaclean/en/

Issued : July 2021 Information in this document is subject to change without notice and it should be used for reference only.
AsahiKASEI Corporation

You might also like