Jul 21, 2025, 12:38:32 PM
Conflicts
Selected combination is invalid
=> - B00: XXXX = none
=> - C00: XXXX = none
=> - D00: XXXX = none
=> - E00: XXXX = none
=> - F00: XXXXX = none
=> - A00: XXXX = none
Characterstic Characteristic value
RUGGEDCOM RSG2100NC 6GK60210AS RUGGEDCOM RSG2100NC is an industrially hardened, fully
1 managed Ethernet switch; 56-bit Encryption; Up to 3-Gigabit
Ethernet ports copper and/or fiber; Up to 16-Fast Ethernet
ports copper and/or fiber; 2 port modules for tremendous
flexibility; Non-blocking, store and forward switching;
Supports many types of fiber (multimode, singlemode, Bi-
directional single strand) Long haul optics allow Gigabit
distances up to 70km Multiple connector types (ST, MTRJ,
LC, SC, RJ45, micro-D)
Power Supply 1 3 HI = 88-300 VDC or 85-264 VAC, screw terminal block
Power Supply 2 3 HI = 88-300 VDC or 85-264 VAC, screw terminal block
Mounting Options D RM = 19" Rack Mount Kit
Main: Ethernet and Power Conne B R = Ethernet on rear; LED panel on front; power connector
on rear
Manufacturing Modification 0 XX = Manufacturing modification: none
Slot 1 A00 XXXX = none
Slot 2 B00 XXXX = none
Slot 3 C00 XXXX = none
Slot 4 D00 XXXX = none
Slot 5 E00 XXXX = none
Slot 6 F00 XXXXX = none
Slot 7 G00 XXXX = none
Slot 8 H00 XXXX = none
Slot 9 J00 XXXX = none
Slot 10 K00 XXXX = none
6GK6021-0AS13-3DB0-Z List price: on request
A00+B00+C00+D00+E00+F00+G00+H00+J00+K00
Disclaimer of Warranty
All information provided on the webpages of Siemens AG is protected by copyright. It is prohibited to copy, process, modify or commercially distribute this
information without the express written permission of Siemens AG.
This information serves informative purposes only and does not contain any binding warranties or representations. The information is provided with the
reservation of changes at any time, including but not limited to technical and commercial changes as well as changes in pricing. Binding declarations are
only given after detailed enquiries.
BECAUSE OF THE INFORMATION BEING ABSOLUTELY NOT BINDING ALL LIABILITY FOR THE ACCURACY OF THE INFORMATION IS EXPRESSLY
EXCLUDED.
On the webpages of Siemens AG you may find links to other webpages which are sometimes not provided by Siemens AG but by third parties. These links
serve informative purposes only. The content of these linked webpages is not provided by or for Siemens AG and Siemens AG does not bear any
responsibility for this content. These linked webpages may be protected by copyrights.
THE USE OF THE WEBPAGES OF Siemens AG IS ON YOUR OWN RISK. THE INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
KIND INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE,
COURSE OF DEALING OR USAGE OF TRADE. Siemens AG IS NOT LIABLE FOR ANY WARRANTY CLAIMS OR DAMAGES, IRRESPECTIVE OF
THE LEGAL CAUSE, WHETHER IN CONTRACT, WARRANTY, FAILURE OF A REMEDY TO ACHIEVE ITS INTENDED OR ESSENTIAL PURPOSES,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INDEMNITY OR ANY OTHER LEGAL THEORY AND IN PARTICULAR SHALL NOT BE
LIABLE FOR DAMAGES INCURRED AS A RESULT OF CONSULTATION, ASSISTANCE IN SETTING-UP PROCEDURES, BUSINESS INTERRUPTION
OR SOFTWARE DEFECTS, EXCEPT WHERE LIABILITY IS MANDATORY FOR DAMAGES TO PRIVATELY USED PROPERTY OR BECAUSE OF
VIOLATION OF CARDINAL CONTRACTUAL OBLIGATIONS OR DUE TO INTENT, GROSS NEGLIGENCE OR FAILURE TO CONFORM TO EXPRESS
WARRANTIES. HOWEVER, LIABILITY FOR DAMAGES ARISING FROM THE VIOLATION OF CARDINAL CONTRACTUAL OBLIGATIONS SHALL BE
LIMITED TO THE FORESEEABLE DAMAGE NORMALLY COVERED BY A CONTRACT EXCEPT INCASES OF WILFUL MISCONDUCT OR GROSS
NEGLIGENCE.
