0% found this document useful (0 votes)

46 views38 pages

2399 0062 04 Diagrams and Drawings

The document provides detailed electrical and hydraulic diagrams for the Drill Master DM75, including part numbers and descriptions. It outlines various revisions and updates made to the schematics, including new features and options added over time. Additionally, it contains warnings and notes regarding the use and handling of the diagrams, emphasizing their confidential nature.

Uploaded by

Joel ACHDC

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

46 views38 pages

2399 0062 04 Diagrams and Drawings

Uploaded by

Joel ACHDC

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 38

Drill Master DM75

DM75D

No. CNN006204
Rev. 001 |
© Copyright 2024, Epiroc Drilling Solutions LLC, USA
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings.
Table of Content
Electrical Diagram................................................................................................5
D.C. SCHEMATIC / .................................................................................................................6
SCHEMATIC, ELEC / ........................................................................................................... 25
RCS LITE SCHEMA / ........................................................................................................... 26
Hydraulic Diagram............................................................................................. 33
HYDRAULIC SCHEM / .........................................................................................................34

3
4
Electrical Diagram
LIST OF CONTENTS
Part no Description Remarks Page
2310030526 D.C. SCHEMATIC 6 - 24
2310034072 SCHEMATIC, ELEC 25
2310133078 RCS LITE SCHEMA 26 - 31

5
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY
8241
000 ALL 025
NEW RELEASE. 09.09.23 NH SM
8241 PROXIMITY SWITCH WAS
001 SHT9 258 ADDED AS OPTION.
11.11.24 NH SM
1. DUST CURTAIN/BREAKOUT/CAROUSAL SWING/ROD
8241
002 ALL 314
SUPPORT/THROTTLE CONTROL ARE UPDATED.
2. TOWER DOWN DECEL CONTROL ADDED.
3. INTERLOCK OF PROPEL AND TOWER RAISING ADDED.
12.08.01 NH SM
A
1.FAN BLOWER CONTROL SYSTEM ADDED.
2.GENSET PRE HEAT ADDED.
3.ENGINE PRE LUBE ADDED.
8241
003 ALL 500
4.ELECTRIC THREAD LUBRICATOR CONTROL ADDED.
5.RESISTOR FOR PULLDOWN FORCE LIMIT ADDED.
14.12.29 LLG JZ
6.CAB AC SYSTEM ADDED
7.EARS SYSTEM ADDED

8241
004 ALL 507
8 SPOOL VALVE, 10 SPOOL VALVE UPDATED 15.11.06 LLG JZ

1. MICROWAVE OVEN OPTION ADDED

SHT-1 2. QXK19 SHUT DOWN CIRCUIT UPDATE

CUMMINS QSK 19 TIER2/ CAT C27 TIER 2

SHT-2 3. CAT C27 OPTION ADDED
4. FAN BLOWER CIRCUIT UPADTE
SHT-3 5. ADDTIONAL HEATER OPTION ADDED
17010
005 SHT-6
009
6. LIGHTS IN MH ADDED
7. COOLER SHUTTER CONTROL OPTION ADDED
17.10.26 LLG JZ
SHT-8 8. CAB SEAT HEATER OPTION ADDED
SHT-10 9. RACOR FILTER HEATER OPTION ADDED
SHT-13 10.SPRING LADDER/FAN BLOWER PROPEL
INTERLOCK ADDED

SHT-2
1. ENGINE SHUT DOWN CIRCUIT UPDATED.
SHT-3 2. PROPEL JOYSTICKS WIRING UPDATED.
SHT-4 USS19
006 SHT-5 00162
3.
4.
JACK WIRING UPDATED.
TRAM SPEED CONTROL ADDED.
19.02.22 LLG JZ

SHT-7 5. BREAKOUT FORK WIRING UPDATED.

6. RADIO REMOTE CONTROL ADDED. B
SHT-11
1.RES4 ADDED.
SHT-4 USS20
007 2.CAB LIGHT CONNECT TO CB6 WAS CB7. 20.03.21 EW JZ

PROHEAT

COOLANT
SHT-8 00215 DELETE NOTE 14 &15.

ENGINE

HEATER
USS21
008 SHT2-E9
01113
THROTTLE WIRES FOR CUMMINS UPDATED. 21.08.09 EW JC

MICROWAVE OVEN
PCM

TIMER

ALTERNATOR

(OPTION)
CABISIDE

)
STARTER
NON-CAB

STARTER

100 AMP
SIDE

(
5
C

S4
M

M
DISCONNECT

ALT
BATTERY

S4
POWER SOURCE FOR
12 VDC OPTIONS

TO SH12,

FUSIBLE
VANNER EQUALIZER

LINKS
C-3
P2
SIDE OF DRILL
20A BATTERY SAME

AS EQUALIZER

35A

35B
N1

8 AWG

8 AWG
LOCATED AT
D
BATTERY JUMP START

+12 V GRND

14 AWG
-

-
12 V
12 V

MICRO
WAVE
CONNECTION

-
(OPTION)

7
S1
V2

S3
+

15 A
CB#5
-

+24 V
12 V

12 V
+

KEY SWITCH

6
POSITIVE CONNECTION POST

ON
10A

20A
P1

FUSIBLE LINKS

OFF
V1
E

242B
8 AWG
ON NCS STARTER

1
1
P2

CB #6, #7
TO SH 12

FUSE
30A
8 AWG
2

242A
F

10 AWG
NOTES:

1. MODE SELECTOR SWITCH MUST BE IN

"DRILL MODE" TO START ENGINE.

ROTATION AND PULLDOWN PROPORTIONAL CONTROLLER

MUST BE IN NEUTRAL POSITION TO START ENGINE. THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
2. DO NOT USE ENGINE GROUNDING STUD FOR WELDING. EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY)
:
ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

1. " "
ANGLES 0 30' MFG. APPVL.
CONFIDENTIAL OR TRADE SECRET INFORMATION
THE AWS STRUCTURAL WELDING CODE ANSI/AWS D1.1 THEREIN; (2) NOT COPY THE DRAWING; (3) NOT
3000 UP 3.0 UNSPECIFIED FILLETS PERPENDICULARITY FIRST ANGLE PROJECTION DATE DM75
COPYRIGHT 2021 GMAW, SHORT CIRCUIT TRANSFER MODE, IS NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE
AND RADII TO BE 0.75 (SQUARENESS)

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
2. DRILLING SOLUTIONS
ALL RIGHTS RESERVED
EPIROC DRILLING SOLUTIONS RETURN THE DRAWING, ALL COPIES THEREOF, AND
ALL MATERIAL COPIED THEREFROM.
ALL BURRS AND SHARP CORNERS AND
COUNTERSINK TAPPED HOLES TO BODY SIZE.
POSITION

CONCENTRICITY
SCALE 1.000 COMM.
NO. 2310030526 SH 1 OF 19

6
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

QSK 19 TIER 2

UNSWITCHED GROUND
UNSWITCHED POWER

ENGINE SHUTDOWN
KEYSWITCH INPUT

AIR TEMPERATURE
AIR TEMPERATURE
STARTER RELAY NCS
)

ETHER CONTROL
STARTER RELAY CS
)

START INTERLOCK
NEUTRAL START

NEUTRAL START

DIAGNOSTIC
DIAGNOSTIC
DATA LINK

THROTTLE
B

FUEL GAUGE

CONTROL
(

INTERLOCK

CIRCUIT
(

TO ECM

SWITCH

ENGINE
LIGHTS

SENDER
J1939

GAUGE
RELAY

(
5

5
31 PIN ENGINE

5
5
5

23 PIN ENGINE
16 PIN ENGINE

ES
SERVICE TOOL
3 PIN J1939

CONNECTOR

CONNECTOR
CONNECTOR
ON ENGINE

C
CONNECTOR

COMPRESSOR DISCHARGE
20
21
22
01

24
17

08
C
B

16
A

TEMPERATURE SENDER
X
W
F
K
L

C
A

H
200
100
200
100
04E
03E

18E
02E

23E
01E

21E
16E

DIAGNOSTIC DECREMENT 24E

17E

20E

22E
08E

X
W
38E
EMERGENCY
OHM
120
C

(OPTION)

DIAGNOSTIC INCREMENT
TACHOMETER

ANSUL

2657409104
STOP

FIRE

ENGINE WARNING LAMP

B
34
25
16

DIAGNOSTIC SWITCH
S1

ENGINE

MAINTENANCE LAMP
ENGINE STOP LAMP

THROTTLE RETURN
SENDER UNIT

12
THROTTLE SIGNAL
HYD. TO CERTIQ HARNESS HLA
A
34
25
16
1

THROTTLE +5V
36E
(OPTIONAL)
VOLTMETER

R23
NEUTRAL DETECT FEED

ENGINE

34
25
16
B
A
34
25
16

7F
20
(SH 6, C-5)

MODE SELECT SWITCH

UNSWITCHED BATTERY +24V

ENGINE WATER
TEMPERATURE

7
5

LVL.

COOLANT LEVEL RETURN

SW.

COOLANT LEVEL SIGNAL

B
34
25
16
90

BATTERY RETURN -24V

COOLANT LEVEL +5V

34
25
16
A

-
(SH 6, B-8)
89

-
7
8

A
B
C
2.5 K

2.5 K
2.5 K

THROTTLE HARNESS
OPTION PRELUBE

36D

B
Y
R
+
307

ENGINE OIL

2654651187
OR

+
PRESSURE
(TO PRELUBE

B
34
25
16
TIMER/SOL)

DIAGNOSTIC SCROLL
248 F
DISCH

DIAGNOSTIC SWITCH
TEMP

2658337417
A
34
25
16
19

YLW
337

J1939 DATA LINK SHIELD

6
5
1

36C
B
34
25
16
9

RED BLK
EMERGENCY
R8A

J1939 DATA LINK (+)

J1939 DATA LINK (-)

DC SIDE
START

(SH 6, C-3)

34
25
16
A

STOP
FUEL GAUGE

BLU
ROTATION

(DIAGNOSTICS)
NEUTRAL

C
A
B
DETECT

POWERVIEW

36B

F
A
C

E
D
POWER +24V
(RESISTOR INCLUDED)

COMPRESSOR DISCHARGE
HARNESS 2657760555
MODULE

EMERGENCY
MURPHY POWERVIEW

CAB SIDE
R7A

GROUND

COOLANT LEVEL SENSOR

TEMPERATURE GAUGE
R9A

STOP

5
89

36A

THROTTLE CONTROLLER
B C A 2657678088

DIRECT
CAN HI

2657409096
CAN LO
CAN SHLD

EMERGENCY
CONNECT

STOP IN
CONSOLE
TERMINATION

TO
BATTERIES
RESISTOR

2658337361
CONNECTOR
DATA LINK

CB#1
5 A
A

E
B

D
9 PIN

7
7
7

7
6 7

6
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

SCHEMATICS,DC
EXPORT ADMINISTRATION REGULATIONS. EPIROC DRILLING SOLUTIONS, IT WILL (1) NOT
2.5
400 - 2000 0.7 0.40 DATE 09.09.23 TITLE
STRUCTURAL WELDING PROCEDURE CHN/AWS-02 AND USE THE DRAWING OR ANY COPY THEREOF OR THE 600 TO 3000
ANGLES 0 30'
ANGULARITY
CONFIDENTIAL OR TRADE SECRET INFORMATION MFG. APPVL.
THE AWS STRUCTURAL WELDING CODE ANSI/AWS D1.1 THEREIN; (2) NOT COPY THE DRAWING; (3) NOT
3000 UP 3.0 UNSPECIFIED FILLETS PERPENDICULARITY FIRST ANGLE PROJECTION DATE DM75
COPYRIGHT 2021 GMAW, SHORT CIRCUIT TRANSFER MODE, IS NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE
AND RADII TO BE 0.75 (SQUARENESS)

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 2 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

7
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

CAT C27 TIER2 A

DATA LINK CONNECTION

EMERGENCY SHUTDOWN
STARTER RELAY NCS

MODULE AND GAUGES

(STANDARD E-STOP
STARTER RELAY CS

MURPHY POWERVIEW

BATTERY NEGATIVE
START INTERLOCK

AIR TEMPERATURE
ENGINE THROTTLE
ENGINE SHUTDOWN

AIR TEMPERATURE
SWITCHED POWER
UNSWITCH POWER
NEUTRAL START

NEUTRAL START

COOLANT LEVEL
J1939 AND CAT
FUEL GAUGE
INTERLOCK

INTERLOCK

STRING)
CONTROL
SENSOR
TO ECM
RELAY

SENDER

GAUGE
B
5

5
5
5

5
5

5
5
5
5

5
5
5

5
120
OHM

ENERGIZE TO RUN
R19

TO CERTIQ HARNESS HLA

D26
R19
25
34

44E
B
S1

TACHOMETER

ENGINE

70E
42E
08E
09E

55E
34E
50E

66E
04E
49E
05E

61E
63E
65E
48E
52E
53E

69E

44E
ENGINE

ECM
1

16
34
25
A
SENDER UNIT

42E
08E
09E
34E
50E

66E
70E
TERMINATION

36F

COMPRESSOR DISCHARGE
RESISTOR
R7

SUPPRESSION

TEMPERATURE SENDER
UNSWITCHED BATTERY +24V

UNSWITCHED BATTERY +24V

(OPTION)
FIRE
C

5
ENGINE VOLTMETER

120
OHM
NEUTRAL DETECT FEED

25
16
34
B
20

2657409104
36E

12
COOLANT LEVEL SIGNAL
COOLANT LEVEL RETURN
(OPTIONAL)

R23
COOLANT LEVEL +8V
25
16
34
A
(SH 6, C-5)

THROTTLE SIGNAL
90

SWITCHED POWER
0X

MODE SELECT SWITCH

307

89
OR
OPTION PRELUBE

100E

100E
(TO PRELUBE
TIMER/SOL)

J1939 DATA LINK SHIELD

(SH 6, B-8)

ENGINE COOLANT

7F
J1939 DATA LINK (-)
J1939 DATA LINK (+)
25
34

36D
B

INLINE

INLINE
90

TEMPERATURE

CAT DATA LINK (+)

CAT DATA LINK (-)

FUSE

FUSE
15A

15A
8

337
WH

HYD.
LVL.
19

34
25
16
A

SW.
D

HARNESS (2657760555)
(RESISTOR INCLUDED)
9

COOLANT LEVEL SENSOR

DIRECT CONNECT

DIRECT CONNECT
TO BATTERIES
5 BLK
7 GRN

TO BATTERIES
R8A

MURPHY POWERVIEW
START

7
TEMPERATURE
DISCHARGE

248 F
(SH 6, C-3)

O
ENGINE OIL
FUEL GAUGE
ROTATION

A
C
B
25
34

16
B
17
NEUTRAL

PRESSURE
DETECT

YLW
36C
25
A

16
34
R7A
R9A

RED BLK
89

GROUND LVL
NCS/DE

BLU
SIGNAL
RETURN
TO SH 13,E-6

+24V
10
11
1 12
B
POWERVIEW

36B
THROTTLE CONTROLLER
E
2
3

GROUND LVL

COMPRESSOR DISCHARGE
MODULE

CS/NDE
C
B
6

TEMPERATURE GAUGE
25
A

16
34

(2658316897)
1
TERMINATION

36A
RESISTOR

2657409096
A
B
C
D
E
F
G

CAN HI
B C A

CONSOLE
CAN LO

CAB
CAN SHLD

7
7
7

7
7

7
7
7

7
7
(2657678088)

36
DATA LINK
CONNECTOR
9 PIN

CB#1
5A
F

6
6

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 3 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

8
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

)
A

(
(

)
(

FEMA

(
STROBE LIGHT ON PLATFORM REAR

(OPTION)
STROBE LIGHT ON CAB (OPTION)

ROTARY HEAD DOWN INTERLOCK

(SPRING RETURN TO NEUTRAL,

(SPRING RETURN TO NEUTRAL,
INDICATOR LIGHT (OPTION)
(OPTION)

,
,

RETRACT (OUT,CYLINDER EXTEND)

EXTEND (IN,CYLINDER RETRACT)
PROPEL INTERLOCK

LIMIT SWITCH(OUT)
B

CENTER LOCKING)
CENTER LOCKING)

CAROUSEL STOWED
SOLENOID VALVE

PULLDOWN FORCE
ROTARY HEAD UP
PROPEL SELECT

FEMA ACTUATOR
PROPEL DRILL

ROD SUPPORT
PROPEL ALARM

PROPEL MODE
PROPEL MODE
PROPEL MODE

DRILL FEED
MAIN PUMP
MAIN PUMP

(NO BUMP)

CAROUSEL

INDEXING
D.C.SIDE
CAB SIDE

CONTROL

PULLDOWN
RELAYS

LIMIT
FORCE

CCW
ROD
AUTO
AUTO

5
10

5
8

SV
R5

LOCKING
D4
R6

G
Y

LOCKING
G
Y

RETURN
HANDLE

CENTER
SPRING

RETURN
HANDLE

CENTER
SPRING
70B

2310113583, SECT 6
70B
70B

+
X

2310113583, SECT 4
-
A
+
B

A
B

-
70B

DPV

DPV
C1 DN/F'WD C

UP/B'WD

C1
C1

C2
R11A

C2
R11

R13

R2
74
7

73
70A
70A
70A

96
70C

SET FOR PULLDOWN PRESSURE

2
INTERLOCK

R5B
R5A

33A

54
95

5
2

53
19

B'WD
F'WD
R1OA

JACK

R13B
4

79
)

1
2

2
60

(SHT.1, ZONE C-5)

R6A

R6B
C1
82A

CCW C2
62
R11B

(SHT.1, ZONE B-5)

POT(0-500

120
50

-
33
NEUTRAL DETECT

-
CKT
ROD IN HOLE/TRAM INTERLOCK

CKT
HOLDBACK VALVE

CW
R13A

NEUTRAL DETECT

OF 1200 PSI
R2A
70A

KNOB

MOUNT IN CONSOLE
B
ROD SUPPORT INTERLOCK

B
SV

PULLDOWN

59
58

B
D

ROTATION
R/S RET
U.T.DEC

PA
79B
82

121
20

X
RETRACTED(ON)
34

X
81

ROD SUPPORT
R14

A
9
90
X0

106
0X

98
DRILL

78
5

ROD INDEXING
A

RETRACT

A
79A

ROD SUPPORT

A
6

CAROUSEL
NO
CONTROL

CONTROL
NC
+

+
B

+
82
82

N
A
N
X

R
A

-
+
R

NC
NO

0-500
RES2
CONTROL
PROPEL

9
9

DRILL

FORCE
130

FEED

LS4
160

3
8
8
(SHT. 1)
80

78B
7
7

82 RES3
RES4
19

LS5

LS6

200

200
NEUTRAL
DETECT

82
82

82
NOTES:
(FRICTION HOLD,

3. N.O. CONTACT HELD CLOSED WHEN CAROUSEL IS IN STOWED

(FRICTION HOLD,
CENTER LOCK)

BUTTON IN HANDLE
POSITION(OUT)

CENTER LOCK)
BUTTON IN HANDLE
DRILL MODE

NEUTRAL
PULL DOWN

DETECT

DRILL MODE

SPEED REDUCER
SPEED REDUCER

ROTATION
4. IF JACK/PROPEL INTERLOCK OPTION IS N0T USED, CONNECT
WIRE 70A TO RELAYS R5 AND R6. AND OMIT WIRE 70B.
/ , 70A R5 R6, 70B
5. LIMIT SWITCH ON CAM SHAFT OF OEM CONTROLLER, TO DETECT

80
80

PULLDOWN CONDITION.
20 A
CB#3

6. MODE SELECT SWITCH: JACK, HOIST, TOWER PINNING FUNCTIONS F

ARE ENABLED ONLY IN DRILL MODE.

6
6

: , ,
7. FOR PROPEL INTERLOCK, IF NO ROD SUPPORT DO NOT INSTALL
RELAY 11. USE R13B CONTACTS FOR TRAM INTERLOCK.
, II. R13B
8. SWITCHES FROM DRILL CONTROLLERS. TO PROPEL CONTROLLERS.

9. ADD JUMPER BETWEEN WIRE #98 AND #106 IN ELECTRICAL

BOX WHEN RIG DOES NOT GET NO BUMP.
98 106
(SEE (SHT-5) ALSO PART OF NO BUMP) THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

10. STROBE LIGHT "ON" DURING TRAMMING ONLY. WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART
SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS
19. C1 MEANS MAIN PUMP COIL CLOSE TO DE ON CS SIDE.
THAT, EXCEPT AS AUTHORIZED IN WRITING BY

C1 THE AWS STRUCTURAL WELDING CODE ANSI/AWS D1.1 CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; (2) NOT COPY THE DRAWING; (3) NOT
3000 UP 3.0 UNSPECIFIED FILLETS PERPENDICULARITY FIRST ANGLE PROJECTION
MFG. APPVL.
DATE DM75
GMAW, SHORT CIRCUIT TRANSFER MODE, IS NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE
20. C1 MEANS MAIN PUMP COIL CLOSE TO DE ON NCS SIDE.
(SQUARENESS)
COPYRIGHT 2021 AND RADII TO BE 0.75
EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY
CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
C1 DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS
TO RETAIN THE DRAWING, OR UPON DEMAND,
ALL BURRS AND SHARP CORNERS AND
2310030526 SH 4 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

9
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

JACK/SPRING LADDER/FAN BLOWER RETRACT

(BOTTOM COIL)

(BOTTOM COIL)
(OPTION)

(OPTION)
(BOTTOM COIL)
(OPTION)
(TOP COIL)

(BOTTOM COIL)
(TOP COIL)

JACK RETRACT INDICATOR

(TOP COIL)

(TOP COIL)
DUST COLLECTOR SIDE

TRAM SPEED CONTROL

NON-DRILL END JACK
RETRACT INDICATOR

RETRACT INDICATOR
END JACK CONTROL

PROPEL INTERLOCK
CAB SIDE JACK

TEST LAMP

TEST LAMP
TEST LAMP
JACK CONTROL

JACK CONTROL

/
NON DRILL

D.C. SIDE
CAB SIDE

RETRACT

RETRACT
RETRACT
EXTEND

EXTEND

LOWER
RAISE
/

HOIST

5
5

2658503165, SECT. 4

2658503165, SECT. 5

2658503165, SECT. 1
2658503165, SECT. 6
DPV

DPV
DPV
LOCKING
LOCKING

LOCKING
DPV
LOCKING

VALVE, 3-WAY SOLENOID, 2300000169

CENTER

SPRING
RETURN
HANDLE

CENTER

CENTER
SPRING
RETURN
HANDLE
SPRING
RETURN
HANDLE

CENTER
SPRING
RETURN
HANDLE

R10
C1

C1
C1
C1

C2
C2
C2

D8
28C

28C
28C
G

G
G

186
FAN BLOWER
(OPTION)
D10
D8

LS13

171
170
66

C
R14
65

185

5
5

DCS(OPTION) CS(OPTION)
LADDER

LS13

244
C

27
184
181

183
182

LADDER

LS12
4-JACK OPTION
85

87
83

-
-

NC
LS2

LS1A

183
LS3

CKT
CKT
CKT
CKT

X0
0X

OX
B

X0
B

FAST
JACK
DCS
LS3
181A
65A

182
181
84

88
86

LS7
11
X
X

LS2 182
LS1

SLOW
D

A
A

JACK
A

CS
D.C. SIDE
NON DRILL
END JACK

CONTROL

70B
CONTROL
CONTROL
CONTROL

LS1 181

HOIST
80

+
+

+
JACK
SIDE
JACK
CAB

JACK
REAR

82
82
82

82
80

80
80

80
E
6

6
CKT ELECTRONIC CONTROLLER. F

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 5 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

10
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

TOWER DOWN DECELERATION

LUBRICATOR CONTROL
ELECTRIC THREAD
A

VALVE OFF WHILE

WATER INJECTION
(OPTION)

BLOWER MOTOR

PROPELLING
LOWER (RETRACT)
RAISE (EXTEND)

DUST CURTAIN
(BOTTOM COIL)

(OPTION)
(TOP COIL)
LOWERING

CONTROL

(LOWER)

(RAISE)
RAISING
TOWER

5
5

RESET SWITCH INDICATOR

2658503165, SECT. 8
LOCKING

2658503165, SECT. 3
RETURN
HANDLE

CENTER
SPRING

DPV

2658503165, SECT. 7
-
R22
C1

R
C2

KNOB
LOCKING
RETURN

2658503165, SECT. 2
CENTER
SPRING

HANDLE

B
M
202C

202D

C2
SET INTERVAL FOR 60 SECONDS

X
202E
DPV

2310072817

134
R21

WATER INJ.
C1

A
C2

B1
16

R22

CONTROL
108
-

231
CKT

INTERVAL

+
TIMER
C
-

232
CKT

233
B

133
60
91
B

A1
109
X
92

202B
T3

231A
PS10 NO
X

CB#11(LOCATED IN DC BOX)

234
DUST CURTAIN

OPEN AT 900PSI
A

PRESS SWITCH
R21

900PSI
T4
T1
CONTROL
A

+
LOWERING
RAISING

CONTROL

202A
+
TOWER

BLOWER(OXOO)
RESET

OFF(XOOO)

WTR INJ(OOXO)

BOTH(OOOX)
20A
82

80
82
82
82

82
80

80
E
6

6
2

2
F

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 6 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

11
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

RETRACT WRENCH (DISENGAGE,CYLINDER EXTEND)

EXTEND WRENCH (ENGAGE,CYLIDER RETRACT)

(EXTEND) (SWING IN)

(RETRACT) (SWING OUT)
ANGLE LED PINNING (OPTION)

"NOT LOCKED INDICATOR"

OPEN (CYLIDER RETRACT)

CLOSE (CYLIDER EXTEND)

"NOT LOCKED INDICATOR"

THROTTLE CONTROLLER
(NO-BUMP) (OPTION)

HIGH PRESSURE AIR

VERTICAL PINNING
B

ANGLE PINNING
LOCKOUT RELAY

LOCKOUT RELAY
TOWER PINNING

VERTICAL PIN
ANGLE PIN

(OPTION)
BREAKOUT

CAROUSEL
RETRACT

LOADING
UNLOCK

EXTEND

STOWED
WRENCH
UNLOCK

CHAIN

SWING
LOCK

FORK
LOCK
5

5
2310113583, SECT 9,HP
2310113583, SECT 2
2310113583, SECT 3
2310113583, SECT 7
2310113583, SECT 5

2310113583, SECT 1
D14

D15
R17

R18
R

DPV
DPV
DPV

DPV
LOCKING

LOCKING

LOCKING
C

SPRING
RETURN
HANDLE

CENTER

SPRING
RETURN
HANDLE

CENTER

SPRING
RETURN
HANDLE

CENTER

SPRING
RETURN
HANDLE

CENTER
C1
C1
C1

C2
DPV
DPV

C2
C2
C2
C2

C1
C2

129A

R14A
24A

26A

26
24

117

116
128
94A

11
101A

129
123

126
-

-
100

CKT

CKT
R17B
93

R18B

B
B

B
R18A
R17A

D
12

UNLOCK
UNLOCK

THROTTLE CONTROLLER
X

X
101
94

122

127
(CS) 23 (DCS)

(CS) 25 (DCS)

HIGH PRESSURE
LS11

A
A

A
LS9
OOX
XOO
OOX
XOO

BREAKOUT
OFF
OFF
TS1

CAROUSEL
TS2

CONTROL
WRENCH

CONTROL
CHAIN

+
SWING
FORK
LS10
LOCK

LOCK

A.P.SW

LS8
T.P.SW

82
82

82
82
82

82
80

80
F

NOTES:

11. LIMIT SWITCH USED TO PREVENT ROTARY HEAD FROM HITTING CAROUSEL.
12. DON'T NEED TO CONNECT THIS CONTACT IF ANGLE DRILLING IS NOT SELECTED.

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 7 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

12
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

NDE,NCS,TOWER REST TOWARDS PPBASE

FLOOD LAMP

CAB TOP,ILLUMINATE TOWER BOTTOM

TRAP LAMP

TOP OF CAB,FACING OUTBOARD WALKWAY

DE,NCS,ON DECKING,FRONT LIGHT

CAB TOP,ILLUMINATE TOWER TOP

TOWER SUPPORT FACING WALKWAY

TOWER SUPPORT FACING PUMPS

TOP OF CAB-FACING OUTSIDE

TOP OF CAB-BOARDING LIGHT

TIME INTERVAL SELECTABLE

NCS TOWER SUPPORT

NDE,CS,TOWER REST
T
F

COOLER,WALKWAY
MOTOR 1# (OPTION)

MOTOR 2# (OPTION)

3# (OPTION)
PUMP 2# (OPTION)
PUMP 1# (OPTION)

TEST LAMP
(BOTTOM

HOLD BACK CONTROL

(OPTION)
COIL)

PARKING BRAKE
B

CAB LIGHT
FLOW INDICATOR
PUMP SOLENOID
TEST LAMP

COOLER
(OPTION)
(OPTION)
TORQUE LIMIT

BRAKE ON

ON CONSOLE
5 PULSE TIMER

(TOP COIL)
INJECTION

2
(OPTION)
COLLECTOR

3
WASHER

2
WASHER

1
(OPTION)

WIPER

WIPER
MOTOR
OPTION

WATER

VALVE
DUST

5
28C
2658503165, SECT. 7

28C
(-)
C

D12
C1

R
SV
G

(A)

WP
(A)
(B)

(B)
-

(A)
WP

(B)
(+)
KNOB

(P)
(P)
B

(P)

F
68B

T
T
T

T
B
3A

(OPTION)
FEMA

PA
D13

TEST BUTTON WARNING LIGHTS

F
T
T

F
T
68A

F
A
112

HIGH

PARK
HIGH
PARK
68

PARK
HIGH
LOW

LOW

LOW
A

114

115

42
GND

41
2658503165, SECT. 7

DHD TIMER

29
+24V +12V +12V
131

165
IN
WATER INJECTION

OUT
-
-

LOCATED AT TANK
FLOW SWITCH

DRILL LIGHTS
KNOB
KNOB

114B

TRAM LIGHTS
43
45

46
44

48
47

49
36
35
OOX

XOO

PORT T
B

LOCATED AT CONSOLE
FEMA
C2

PARKING BRAKE
PA

ON/OFF
X
X

LUBE ON
OFF

OFF

OFF
118
TORQUE LIMIT
134
WATER INJ.

A
A
DC/PULSE

CONTROL
CONTROL

+
+

133

164
114A
E

28
80

40
82
82

82
CB#7

CB#6
15A

20A
CB#2
5A

20A
80

80
6

6
F
6

6
2

2
2

2
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 8 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

13
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

FOR ELEC. PUMP DRIVE

CAMERA SYSTEM(OPTION)

COOLER WARNING HORN

THREAD LUBRICATOR
TACHOMETER (OPT)

CAB WARNING HORN

MAGNETIC PICKUP

GRACO AUTOLUBE
SOLENOID VALVE
IN ROTARY HEAD
B

CONTROL (OPT)
ROTARY TABLE

STROBE LIGHT

STROBE LIGHT
ANTI-RUMBLE
CLUTCH SOL.
PRESSURIZER

)
(OPTION)

(OPTION)

ON TOWER
(OPTION)
HEATER/

(
BLOWER

ON CAB
COMP.
MOTOR

CAB
5

5
LOCATED AT COMPRESSOR

RECLOSE AT 240 PSI.

SV
OPEN AT 325 PSI,
21A

C
M

DISCHARGE PORT

STROBE

STROBE
MONITOR
HIGH PRESS.

BARE

CLOSED AT 2500PSI
NEAR COMPRESSOR
N/CLOSE

SV
205

M
206
LOCATED IN CAB

2500PSI
-

LOW LEVEL
SWITCH
TACH

SIG

PRESSURE SWITCH

HORN
HORN
203

SV
10A
+
RE-OPEN AT 6 PSI.

(BLACK)
CLOSE AT 34 PSI,
LOCATED AT EVAPORATOR

(ORANGE)
(YELLOW)
HI

(BROWN)

(WHITE)
BLUE

194A(GRAY)
(BLUE)

BAT(+)
(RED)
LOW

BAT(-)
LOW PRESS.
MED

DISCHARGE PORT

235A
236A
HI

N/OPEN.

80A
235

236

194

209A
MED

SWITCH
VACUUM

209
21

10
9

6
8
4
1

3
5
LOW

202
OFF

243
GLC 2200
PURPLE
THERMOSTAT
ON-OFF
A/C

E
18

TO SH 10,E-9

1A
CB#4
20 A

70A
80
80
80

7
7
82

82
80

80
80

7 70A 80
7 70A

F
6
6

6
2

2
16.NC PRESSURE SWITCH WILL BE ACTIVATED WHEN
PRESSURE HIGHER THAN 2300PSI.

2300PSI WARNING
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
SECRET INFORMATION, IS THE PROPERTY OF EPIROC
UNSPECIFIED TOLERANCES
FABRICATION MACHINING
CHARACTERISTIC

STRAIGHTNESS
SYMBOL O 1in DRAWN BY
DATE
NH
09.09.23 EPIROC
THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART DRILLING SOLUTIONS, AND IS GIVEN TO THE
DIM (mm) TOL (mm) TOL (mm) CHECKED BY NH G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 9 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

14
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

GENSET PRE HEAT

VARIABLE FAN SPEED

ADDITIONAL HEATER
(OPTION)
EFFICIENCY

(OPTION)
(OPTION)
DRILL AIR

INDICATOR

DEI RELAY
INDICATOR
PRESSURE

DRILLING

(OPTION)

(OPTION)
STRATA-
SWITCH

LOGGER
PLUS
B

5
5
PULLDOWN PRESS. SENSOR
TORQUE PRESS. SENSOR

AIR PRESSURE SENSOR

ENGINE OIL PUMP

ADDITIONAL HEATER
0.25 HP

GENSET PRE HEAT

M
D12
C

R12
EMB

15A
COMPUTER DOWNLOAD
STRATALOGGER 2

DIB
(OPTIONAL)

238
DRILLER'S CONSOLE
DEI

LOCATED ON
HAND HELD
MDL 2

TERMINAL

OXO

OOX
OFF LOW HIGH
-
KNOB
ENCODER

OX
LOCATED IN TOWER

FEMA

FROM SH 9,E-2
X

OFF
124
A
E
FAN SPEED
CONTROL

82
82

80
80

7
7

6
6

2
2

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 10 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

15
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

RADIO REMOTE CONTROL WIRING (OPTION)

MAIN PUMP REMOTE

PROPEL INTERLOCK

REMOTE PROPEL MODE (OPTION)

(SPRING RETURN TO NEUTRAL,

(SPRING RETURN TO NEUTRAL,
B

REMOTE CONTROL INTERLOCK

CENTER LOCKING)

CENTER LOCKING)
INDICATOR LIGHT

RECEIVER POWER
SOLENOID VALVE
PROPEL SELECT

PROPEL DRILL

PROPEL ALARM

NON-CAB SIDE

PROPEL MODE
PROPEL MODE
PROPEL MODE

MAIN PUMP
MAIN PUMP

D.C.SIDE
CAB SIDE

D.C.SIDE
CAB SIDE
CAB SIDE
RELAYS
5

5
C

5
RECEIVER

RECEIVER
D13

HARNESS

HARNESS
R5

SV
G
R6

RMI

R3
70B

FROM

FROM
6

70B

EX1

EX1
70B

-
+

X
B

A
70B

53
74

6
5
R11A

56
75
73

54
70A

57
76
EX1/3 TO 71
70C

R3B

R4B
R3A

R4A

53A
INTERLOCK

79A
77

5
R1OA

5
JACK

51
95

1 96

50
R5A

R6A
R5B
C1

R6B
C2

C2
1

2
2

1
2
1

2
70A

59
58
60

-2
20

RECEIVER
82

XO
OX

CONTROLLER WIRING
DRILL

CONTROLLER WIRING
REFER SHEET 2, C
11

REFER SHEET 2
+1

FOR ROTATION
FOR PULLDOWN
PROPEL

(SHT. 1)
80

7
F

7
7

NOTES:

HARNESS EX1 FROM RECEIVER IS NAMED AS 1 TO 11.

EX1 1 11

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 11 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

16
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

USE THIS SHEET IF PROXIMITY-SWITCH I S USED IN PLACE OF LIMIT-SWITCH. A

(OPTION)
FOR USE OF LIMIT-SWITCH
SEE CIRCUIT ON SHT 3 OF 11.

SH-3

CAROUSEL STOWED
FOR USE OF LIMIT-SWITCH
TRAM INTERLOCK
ROTARY HEAD UP

PULLDOWN FORCE
SEE CIRCUIT ON SHT 4 OF 11.

FEMA ACTUATOR
FOR USE OF LIMIT-SWITCH

11
SEE CIRCUIT ON SHT 3 OF 11.

DRILL FEED

(NO-BUMP)
& UP STOP
B

(NO BUMP)
PULLDOWN

CAROUSEL
(OPTION)

SENSOR
FORCE

LIMIT
5
5

5
B
G

PA
A
C
R11

R13

MOUNT IN CONSOLE
-

R14
SEE CIRCUIT ON SHT 2 &3 OF 12

KNOB
82A
62

R15
R15

R15
B
FOR USE OF LIMIT-SWITCH

106

78
DECEL LIMIT SWITCH

X
D

308

27
UPPER TOWER

ROD SUPPORT

0-500
RES2
RETRACTED

T2
+
CONTROL

T3
T1
78A

T2
FORCE
DRILL

PS4
FEED

T3
T1
T2
T2

PS7
RES (50
T3
T3

T1
T1

E
PS6
PS5

82
82
82

82
80
80

80
F
CB#3
20 A

6
6

6
THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 12 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

17
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

ENGINE PRE LUBE

ELECTRIC LINEAR ACTUATOR

LED LIGHTING IN ENCLOSURE

COOLER SHUTTER CONTROL

TRAM SPEED CONTROL

RACOR FILTER HEATER
(OPTION)

SEAT HEATER
LED
5

5
5
B

BLACK
BLACK

VALVE, 3-WAY SOLENOID

HEATER
WHITE

2300000169
C
RED

TO REMOTE RECEIVER
EX1 WIRE 4(OPTION)
PRESSURE CONTROL

HEATER
C
QUICKEVAC

244
WHITE
PUMP
P

RED
ELECTRAK HD
THOMSON
FROM SH1,C-6

241E

241D
241C
RACOR FILTER
HEATER RELAY

X0
0X

X0
RED

BLACK
BROWN
BLUE

R1
R1

R1
239C
D

SLOW
CAN+

CAN-
2
SPDT 2

243

(SHT.9, ZONE C-3)

CONTROL OPTION
240

241A

241B

RADIO REMOTE
239A

239B

RMI B
1
SPDT 1

FROM SH-2,E-5

E
239

241
5A
5A

30A
10A

70A
80
80

6
6

2
2
70A

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 13 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

18
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

INTERCONNECTION DIAGRAM - CAB AC SYSTEM.

RESISTOR
03-13046
COOL EVAPORATOR - COMBO UNIT
20 B

1 2 3 4

BLUE RELAY(R2)
NO
03-01704
ORANGE
NC BLOWER
C1 C2 MOTOR
BLACK
02-03523
C
ORANGE

BLACK C
ORANGE

RELAY (R1) BLACK

NO
03-01704
17 BLACK/WHITE
NC
C1 C2
BLACK/WHITE

C
ORANGE
RED

D
RED TO POWER SOURCE WHEN IGNITION IS ON
YELLOW

BLOWER PRESSURIZER COMPRESSOR ASSY

HIGH PR. CONDENSER
COMPRESSOR SWITCH GAS
(THRU PRSW LO & HI) 21A CLUTCH
S FREON
M NO NC CONTACTS
BLACK/WHITE WHITE TO COMPRESSOR 21 19
H L CLUTCH NO NC LIQUID
C B COOL
THERMOSTART IN OUT
LOW PRESSURE HIGH PRESSURE
BLACK/WHITE TOGGLE SWITCH 03-14003 SWITCH CLOSE SWITCH OPEN
FAN SWITCH 03-13016 AT 34 PSI AT 325 PSI LOW PRESSURE
RED #18
03-13006 SWITCH E
TO POWER SOURCE GAS
BLOWER FAN
34PSI , 325PSI ,
RECEIVER DRYER

#6 START COOLING
LIQUID
CIRCUIT
FREON
#18
24VDC
(FROM CB4, SHT-6 OF 11 GRID 3-E)

F
NOTE:
17. BLOWER MOTOR RUNS AT MINIMUM SPEED WITH FAN .
SWITCH IN OFF POSITION. THIS IS TO CREATE POSITIVE
PREESURE INSIDE THE CAB. THROUGH RELAY (R1)
R1 EVAPORATOR

18. COMPRESSOR ASSEMBLY.

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 14 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

19
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

EARS(OPTION)

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 15 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

20
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

EARS(OPTION)

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 16 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

21
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

EARS(OPTION)

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 17 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

22
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

ENGINE PRE LUBE CONTROL

(OPTION)

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 18 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY 0.0 kg SCALE 1.000 NO.

23
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHT1 FOR REVISIONS.

COLOR AWG WIRE NUMBER CIRCUIT/DEVICE

WIRE DESCRIPTION
WHITE 14 108,109 DUST CURTAIN CONTROL
COLOR AWG WIRE NUMBER CIRCUIT/DEVICE WHITE 14 112 HOLD BACK CONTROL (OPTION)
WHITE 8 1,2 POSITIVE 24 VDC FROM P.S. WHITE 14 114,114A,114B DHD PUMP SOLENOID VALVE (OPTION)
BLACK 10,14 5 GROUND, POWER SUPPLY GROUND, BATTERY RETURN
WHITE 14 115 LUBE FlOW DETECTOR (OPTION)
WHITE 10 6 POWER DISTRIBUTION
WHITE 12 7 POWER DISTRIBUTION FOR START/STOP WHITE 14 116,117 HIGH PRESSURE THROTTLE VALVE (OPTION) B

WHITE 14 7A,8 START/STOP I/LOCK WHITE 14 118 TORQUE LIMIT (OPTION)

WHITE 14 7B R 14-NC CONTACT WHITE 14 120,121 CAROUSEL INDEXING
WHITE 14 7C R 14-NC CONTACT WHITE 14 122,123 CHAIN WRENCH CONTROL
WHITE 14 7D TEMP SWITCH
WHITE 14 124 VARIABLE FAN SPEED (OPTION)
WHITE 14 17 NEUTRAL DETECT INTERLOCK
WHITE 12 18 CAB HEATER/PRESSURIZER WHITE 14 126,127 BREAKOUT FORK CONTROL

WHITE 12 18A AIR CONDITIONER (OPTION) WHITE 14 128,129,129A CAROUSEL SWING

WHITE 14 19,20 ENGINE START ENABLE WHITE 14 130 LOW RANGE SELECT FOR ROTATION
WHITE 14 21,21A CAB AC, COMPRESSOR CLUTCH WHITE 14 131,135 DUST COLLECTOR
WHITE 14 23,24 ANGLE PINNING LOCKOUT RELAY
WHITE 14 133,134 WATER INJECTION (OPTION)
WHITE 14 24A ANGLE P/N "NOT LOCKED" INDICATOR
WHITE 14 25,26 VERTICAL PINNING LOCKOUT RELAY WHITE 14 150,151 DUST FLAPS

WHITE 14 26A VERTICAL P/N " NOT LOCKED" INDICATOR WHITE 14 152 HEAT DEV ON SW TO THERMOSTAT (HEAT DEV) C

WHITE 14 164 CAB LIGHT WHITE 14 153 HEAT DEV ON SW-FM HEAT/COOL SW
WHITE 10 28A TRAM LIGHTS SWITCH WHITE 14 154 INSULATION (GROUND FLT) ALARM
WHITE 10,14 29 LIGHTS: TRAM, WALKWAY, REC
WHITE 14 155 CONTACTOR, THERMAL O/L RELAY
WHITE 14 33,33A ROD SUPPORT EXTEND (OPTION)
WHITE 14 34 ROD SUPPORT RETRACT (OPTION) WHITE 14 156 AC HEATER (HEAT DEV) CONTACTOR

WHITE 14 37,38 THROTTLE SETTING CAT ENGINES WHITE 14 160 LOW RANGE SELECT FOR FEED
WHITE 14 40 WIPER OPTION WHITE 10 164 FROM CB TO DRILL LIGHT SWITCH
WHITE 14 41 WASHER MOTOR #1 (OPTION) WHITE 10 165 DRILL LIGHTS: TOWER TOP, POWER PACK, TOWER BOTTOM
WHITE 14 42 WASHER MOTOR #2 (OPTION)
WHITE 14 170,171 HOIST
WHITE 14 43 WIPER MOTOR #1 PARK
WHITE 14 44,45 WIPER MOTOR #1, LOW - OFF - HIGH (OPTION) WHITE 14 181,182,183,184,185,186 JACK/SPRING LADDER/FAN BLOWER RETRACT, PROPEL INTERLOCK (OPTION)

WHITE 14 46 WIPER MOTOR #2 PARK WHITE 14 190,191 PRESSURE SWITCH, CENTROMATIC LUBE (OPTION) D

WHITE 14 47,48 WIPER MOTOR #2, LOW - OFF - HIGH (OPTION) WHITE 14 192,193 LOW LEVEL SWITCH, CENTROMATIC LUBE (OPTION)
WHITE 14 49 WIPER MOTOR #3 PARK WHITE 14 194,195 PUMP SOLENOID, CENTROMATIC LUBE OPTION)
WHITE 14 35,36 WIPER MOTOR #3, LOW - OFF - HIGH (OPTION)
WHITE 14 198,199,200 ESPAR HEATER TIMER
WHITE 14 50,51 D. C. SIDE, MAIN PUMP, PROPORTIONAL ACTUATOR
WHITE 14 53,54 PROPEL MODE, D. C. SIDE, MAIN PUMP WHITE 14 201A DEI POWER SOURCE

WHITE 14 58,59 ROTATION, DRILL MODE, D. C. SIDE, MAIN PUMP WHITE 14 202 THREAD LUBE (OPTION)
WHITE 14 60 DRILL MODE, CAB SIDE, MAIN PUMP WHITE 14 203 VACUUM SWITCH (OPTION)
WHITE 14 61 PULL DOWN, DRILL MODE, ROD CHANGER BYPASS DIODE WHITE 12 204 RACOR FUEL HEATERS (OPTION)
WHITE 14 62 UPPER TOWER, DECEL LIMIT SWITCH AND TRAM INTERLOCK
CABLE 18/2 BLACK, CLEAR 205,206 ROTATION TACHOMETER (OPTION)
WHITE 14 63 PULLDOWN, DRILL MODE, POTENTIOMETER
WHITE 14 65 NON-DRILL END JACK RETRACT INDICATOR CABLE 18/2 BLACK, CLEAR 205,206 ROTATION TACHOMETER (OPTION)

WHITE 14 66 CAB SIDE JACK RETRACT INDICATOR WHITE 14 208,208A HATCH DOOR
WHITE 14 67 D.C, SIDE JACK RETRACT INDICATOR WHITE 14 209 CAB WARNING HORN (OPTION)
E
WHITE 14 68,69 PARKING BRAKE (OPTION) WHITE 14 209A COOLER WARNING HORN (OPTION)
WHITE 14 70,70A,70B,70C PROPEL MODE, JACK RETRACT, TRAM INTERLOCK (OPTION) 28B,28C,68A,68B,68C,23A,
WHITE 14 73,74 PROPEL MODE, CAB SIDE, MAIN PUMP WHITE 14
67A, 65A, 66A
TEST LAMP

WHITE 14 78,98 PULLDOWN FORCE LIMIT,CAROUSEL UNSTOWED WHITE 14 52,53A,56,57,71,75,76 77,79A REMOTE PROPEL OPTION
WHITE 14 79 DRILL MODE, CAB SIDE, MAIN PUMP
WHITE 12,14 80 POWER DISTRIBUTION FOR OEM CONTROLLERS WHITE 14 232,233 TOWER DOWN DECEL.
WHITE 14 81 HOLDBACK SOLENOID VALVE ON TOWER
WHITE 12,14 82 POWER FOR DRILL MODE FUNCTIONS
WHITE 14 82A ROD SUPPORT RETRACT RELAY (OPTION)
WHITE 14 83,84 CAB SIDE JACK CONTROL 7-SPOOL FUNCTIONS(2657750572) SPOOL FUNCTIONS(2310016202)
WHITE 14 85,86 NON-DRILL END JACK CONTROL
HOIST
WHITE 14 87,88 D.C. SIDE JACK CONTROL ROD CHANGER(CAROUSEL)
WHITE 14 89 NEUTRAL DETECT, ROTATION CONTROLLER TOWER RAISING
AUTO BREAKOUT
WHITE 14 90 NEUTRAL DETECT, PULL DOWN CONTROLLER F
DUST CURTAIN
WHITE 14 91,92 TOWER RAISING & LOWERING CHAIN WRENCH
WHITE 14 93,94,94A,94B TOWER PINNING JACK,FRONT,CAB SIDE
ROD SUPPORT
WHITE 14 95,96 CAB SIDE, MAIN PUMP, PROPORTIONAL ACTUATOR
JACK REAR
WHITE 14 98 PULLDOWN FORCE LIMIT (NO BUMP) TOWER PINNING
WHITE 14 100,101,101A ANGLE LEG PINNING JACK,FRONT,DCS
ANGLE PINNING
WHITE 14 106 PULL DOWN FORCE LIMIT
DUST COLLECTOR/WATER INJECTION
ROD INDEXING

AIR THROTTLE(ONLY FOR HP)

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY NH

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
09.09.23
NH
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 09.09.23 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. NH
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A1 REF.NO 2657663031
DWG
NO. 2310030526 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310030526 SH 19 OF 19
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. CONCENTRICITY
SCALE 1.000 NO.

24
25
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY
1711
000 ALL NEW RELEASE 18.03.27 LLG JZ
6002
ADDED CABLE 304 BALLOON
SHT1:D7
ADDED WIRE SIZES
SHT1:B5
ADDED RED LION RS485 CONVERTER
SHT1

TERMINATION RESISTOR
CHANGED TO EPIROC FORMAT

RCS LITE NETWORK MAP

ALL USS19
001 ADDED CABLE 501 PINOUT 19.05.16 LLG JZ
SHT1:B8 00278
REVERSED GPS RECEIVER LABELS 1&2 A
SHT1:C7
SWITCHED CONNECTIONS OF CABLES
SHT1:C7

ADDRESS PLUG 0
9106182834
477/478 TO CABLES 481/482
SHT2:A1
J1939 CONNECTION ADDED CS RELAY PICTORAL

9106220700
IN CAB CONSOLE USS20
002 SHT3 ADDED DM75SP WIRING 20.08.14 EW JZ
WHITE,CAN-HI TO WIRE 37 302 01191
BLUE,CAN-LO TO WIRE 38
SHIELD,TO J1939 SHEILD

CAB SWITCHED POWER 5A

TERMINATION RESISTOR 9106182834
DSP RCS BOX RELOCATE TO CCI PORT X4 WHEN
POWER 323 CCI OPTION IS PRESENT & ADD CABLE 303
301
303 ADDRESS PLUG 7
306 305 304 308 CAN OPEN 9106220707
BLUE & BLACK TO WIRE 7 CAN OPEN
324
GREEN/YELLOW & BROWN X1 X19
TO WIRE 5 X1 X2 X3 X4 X5 (M) (F) RCS BOX X1 X2 X3 X4 X5 OPTIONAL: B
D501 (M) (F) (M) (F) (M) POWER (M) (F) (M) (F) (M) D700
X25
CENTRAL CCI APPLICATION
(M)
COMPUTER MODULE
DISPLAY (F) (F) (M) (F) (F) (M) (F) (F) (F) (LOCATED IN RCS BOX)
(LOCATED IN CAB) X8 X6 X7 X9 X8 X6 X10 X7 X9

ADDRESS PLUG 0
9106220700
481

482
307
RCS BOX
D510 POWER
INPUT/OUTPUT 327
451
USB MODULE
(LOCATED IN RCS BOX) 3RD PARTY 328
ETHERNET
INTERFACE
454 453 452
456
ETHERNET
STANDARD 5 PIN M12 I/O WIRE CONFIGURATION C

ACCESS POINT CERTIQ FEMALE END VIEW

DIAGNOSTIC/ OPTIONAL WIFI CORRECTIONS GPS ANTENNA 457 4
SERVICE SERVICE 5 PIN WIRE COLOR
(NON-CABSIDE) 1
ETHERNET ETHERNET 1 BROWN +24V DC
478 480 SWITCH #1 SWITCH #2 3
2 2 WHITE SIGNAL b
1

GPS RECEIVER 1 EXTERNAL LOCAL RCS

GPS ANTENNA MALE END VIEW
2

476 (CABSIDE) NETWORK NETWORK 3 BLUE NEGATIVE (-)

LEMO CABLE 5 4
(LOCATED IN (LOCATED IN PRESSURE SENSORS PINOUT (0.5-4.5V OUTPUT)
RCS BOX) RCS BOX) 3 4 BLACK SIGNAL a
RF
479
CORRECTIONS 5 GREEN/YELLOW +5V DC
1

RCS BOX GPS RECEIVER 2 1 PIN SIGNALS

477 ANTENNA 2 4
2

POWER
3 1 +24V DC INPUT
458
STANDARD 4 PIN M12 POWER CONFIGURATION 1 2 0.5-4.5V SIGNAL
DIAGNOSTIC/ OPTIONAL WIFI CORRECTIONS
2
FEMALE END VIEW 3 NEGATIVE (-)
M12 ON SENSOR D
5 4 4 OPEN
PIN WIRE COLOR
1
1 BLACK +24V DC
3
RCS LITE ELECTRICAL BOX POWER AND GROUNDS 2
MALE END VIEW
2 BLUE +24V DC WATER TANK LEVEL SENSOR
3 GREEN/YELLOW NEGATIVE (-)
5 4
10A RCS I/O MODULE
TOP BOTTOM 3 4 BROWN NEGATIVE (-)
LOCATED IN MAIN ELEC. BOX 2R D510 C RED
I/O MODULE (PINS 1,2,5) 2 SIGNAL
10AWG CB1 B BLACK
1 3 NEGATIVE (-)
CCI (PINS 1,2) 2 A WHITE
RP 10A 1 +24 VDC
CONNECT TO GE MULTILIN 7 3R RED LION CONVERTER (TERMINAL 10)
0 1
MOTOR CONTROLLER CB2 7/8 I/O POWER CABLE
5 4R 18AWG POWER OVER ETHERNET
(TERMINALS NUMBERS 3 7 25A FEMALE END VIEW
SAME AS WIRE NUMBERS) 1R 5A
1 1 2 3
14AWG 4 8 14AWG RCS 4R GPS PIN WIRE COLOR PROXIMITY SWITCHES
PLUG VIEW CB3
501 RS485 WIRELESS ACCESS POINT 4 SOURCE (PNP) PROXIMITY SWITCH
1R 2 6
1 (COMM)
2 (+24V)
3 (N/C)

1 BLACK ("+") POWER

74 TxB 5A 1 +24V SUPPLY (PIN 1)
1R 5 2 BLUE ("+") POWER
75 TxA 14AWG 6R
1 2 3 4 5 6 7 8 5 SPARE MALE END VIEW
76 COMM CB4 3 GREEN/YELLOW ("5") GROUND E
10AWG
SPARE 4 3 3 (SOURCE)
COMM 4 BROWN ("5") GROUND SWITCHES (+) SUPPLY
TxA I/O MODULE (PINS 3,4) 4
2 TO LOAD
TxB SPARE WIRELESS ACCESS POINT GROUND 5 WHITE ("+") LOGIC
37 CAN HI 5 1 LOAD
502 38 CAN LO SPARE POWER OVER ETHERNET GROUND
SHIELD SHIELD RED LION RS485 CONVERTOR GROUND SPARE
- SUPPLY (COM) (PIN 2 OR 4)
CONNECT TO J1939 CAN OPEN CARD GPS RECEIVER GROUND CAN OPEN M12 CONFIGURATION
CCI GROUND (PINS 3,4)
TERMINALS IN CAB RED LION CONVERTER (TERMINAL 3) RED LION CONVERTER (TERMINAL 12) FEMALE END VIEW SINK (NPN) PROXIMITY SWITCH (I/O MODULE X23 ONLY)
5 4
SPARE PIN WIRE COLOR + SUPPLY (PIN 2 OR 4)
RED LION RS485 TO J1939 CONVERTER 1
FOR ELECTRIC DRILL ONLY SPARE 1 BARE SHIELD
(LOCATED IN RCS LITE ELECTRICAL BOX) 3 LOAD
SPARE 2 2 RED + VOLTAGE
SPARE MALE END VIEW
3 BLACK - VOLTAGE 3 (SINKING)
5 4
SPARE 4 SWITCHES (-) SUPPLY
3 4 WHITE CAN HI
SPARE TO LOAD
1 5 BLUE CAN LO F
2 - SUPPLY (COM) (PIN 3)

SYMBOL LEGEND
BULKHEAD CONNECTOR
BILL OF MATERIALS
335
ITEM NUMBER

BILL OF MATERIALS NUMBERING

300-399 = RCS CABLE
400-450 = HARNESS THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE
UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG
451-475 = ETHERNET
476-500 = GPS
WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART
SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
18.01.03
JC
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
501-550 = OTHER EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER
1.5
1PL 2PL
ROUNDNESS
O 5 1O 15 2O 25 mm DATE 18.01.03 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. JZ
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

SCHEMATIC,RCS LITE
EXPORT ADMINISTRATION REGULATIONS. EPIROC DRILLING SOLUTIONS, IT WILL (1) NOT
2.5
400 - 2000 0.7 0.40 DATE 18.01.03 TITLE
STRUCTURAL WELDING PROCEDURE CHN/AWS-02 AND USE THE DRAWING OR ANY COPY THEREOF OR THE 600 TO 3000
ANGLES 0 30'
ANGULARITY
CONFIDENTIAL OR TRADE SECRET INFORMATION MFG. APPVL. HS
THE AWS STRUCTURAL WELDING CODE ANSI/AWS D1.1 THEREIN; (2) NOT COPY THE DRAWING; (3) NOT
3000 UP 3.0 UNSPECIFIED FILLETS PERPENDICULARITY FIRST ANGLE PROJECTION DATE 18.01.03 DM30/DM75
COPYRIGHT 2020 GMAW, SHORT CIRCUIT TRANSFER MODE, IS NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE
AND RADII TO BE 0.75 (SQUARENESS)

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO 2658730014
DWG
NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 1 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

26
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHEET1 FOR REVISIONS

NON-CAB
CKT
SIDE
JACK
CONTROL 5

SPRING
RETURN
CENTER + A X B - 87R
FROM PWM CONV. J1
6 7 80 82 6 7 80 82 DRILL 5
LOCKING ALIR1 FEED KNOB
87R 87
C2 EXTEND (TOPCOIL)
ORIGINAL RIG WIRING
FORCE B

ALIR1 DPV NON-CAB SIDE JACK CONTROL

80 88R 88
C1 RETRACT (BOTTOM COIL) (FOR REFERENCE) + A X B -
DRILL FEED FORCE
88R 82
LS3 FROM PWM
80 67 CONV. J1 LS4
G NON-CABSIDE JACK 106
RETRACT INDICATOR PULLDOWN FEMA ACTUATOR
182 183 67R 28C
TO PWM 200 0-500 0 A
NON-DRILL. CONV. J2 82 78A 78 78 98
CKT PA CAROUSEL STOWED
END TEST LAMP OPTION
JACK RES2 FEMA LIMIT SWITCH
D10
CONTROL PULLDOWN FORCE
LIMIT (NO BUMP)
MOUNT IN CONSOLE
SPRING
RETURN DRILL
CENTER + A X B - 85R
FROM PWM CONV. J1 FEED KNOB
LOCKING ALIR2 FORCE
85R 85
C2 EXTEND (TOP COIL) RCS LITE + A X B -
C

WIRING
ALIR2 DPV NON-DRILL END JACK CONTROL
80 86R 86
C1 RETRACT (BOTTOM COIL) 82 ADD CS RELAY TO
MAIN ELECTRICAL BOX
LS1 LS1A 86R
FROM PWM 7
80 65A 65 CONV. J1 106 98
G NON-DRILL END JACK DRILL FEED FORCE
RETRACT INDICATOR CS
80 181A 181 65R 28C
TO PWM CONV. J3 200 0-500 TO PWM
82 78A 78 LS4 98R CONV. J3
TEST LAMP OPTION 7 WHITE PULLDOWN FEMA ACTUATOR
RES2 CS
D9 BROWN
4 JACK OPTION
78 98 0 A CAROUSEL STOWED
183 0 1 PA
CAB SIDE R10 JACK RETRACT/ MOUNT IN CONSOLE BLUE LIMIT SWITCH
CKT PROPEL INTERLOCK OPTION FEMA
END
PULLDOWN FORCE
JACK FOR FIELD INSTALL, ADD 98
D7 LIMIT (NO BUMP) D
CONTROL NEW CABLE FROM MAIN BOX BLACK
BREAKOUT TO LS4 IN TOWER AND FOLLOW
CKT
FORK WIRE COLORS SHOWN.
CONTROL
SPRING
RETURN
CENTER + A X B - 83R
FROM PWM CONV. J1
LOCKING ALIR3
83R 83 SPRING
C2 EXTEND (TOP COIL)
RETURN
DPV CAB SIDE JACK CONTROL CENTER + A X B -
80 84R ALIR3 84 TO PWM
C1 RETRACT (BOTTOM COIL) LOCKING 126R
CONV. J2 126
C2 ENGAGE
LS2 84R CDX
FROM PWM TO RCS DPV BREAKOUT WRENCH
80 66 CONV. J1 82 127
G CABSIDE JACK C1 DISENGAGE
RETRACT INDICATOR 127R
181 66R TO PWM
182 TO PWM CONV. J2 28C
CONV. J2
TEST LAMP OPTION
6 7 80 82 5
D8
E

6 7 80 82 5

CS
0 1 5
98R
3 7

106
4 8
98
2 6

CS RELAY WIRING F

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

SECRET INFORMATION, IS THE PROPERTY OF EPIROC
DRILLING SOLUTIONS, AND IS GIVEN TO THE
FABRICATION
DIM (mm) TOL (mm)
MACHINING
TOL (mm)
STRAIGHTNESS DATE
CHECKED BY
18.01.03
JC
EPIROC G
RECEIVER IN CONFIDENCE. THE RECEIVER BY DIM (mm) FLATNESS
EXPORT OF THIS DRAWING TO COUNTRIES STRUCTURAL WELDING MUST BE DONE BY WELDERS AND RECEPTION AND RETENTION OF THE DRAWING UNDER 1PL 2PL O 5 1O 15 2O 25 mm DATE 18.01.03 DRILLING SOLUTIONS LOCATION: NANJING, CHINA
ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES 600
1.5 ROUNDNESS
OUTSIDE OF CHINA IS SUBJECT TO CHINESE UP TO 400 0.4 0.13 (CIRCULARITY) ENG. APPVL. JZ
PROCEDURES QUALIFIED IN ACCORDANCE WITH THE DS THAT, EXCEPT AS AUTHORIZED IN WRITING BY

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO 2658730014
DWG
NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 2 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

27
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

ONLY FOR DM75 SP

SEE SHEET1 FOR REVISIONS

6 7 5
DRILL POSITION A
DRILL R7A R8A
FEED KNOB 8 6 17 8 6 19 OX 20 0 1
R9 START INTERLOCK
FORCE 5
RCS LITE
6 7 80 82
+ A X B - DRILL/PROPEL 11

82
WIRING ADD CS RELAY TO OX
Y STROBE LIGHT ON PLATFORM REAR OPTION
MAIN ELECTRICAL BOX
XO
CB3 G PROPEL MODE INDICATOR LIGHT OPTION
106 98 80 OX D5
20 A XO 70A 70A
CS PROPEL ALARM

80 70R TO PWM 9
R10A R15A
CONV. J3 8 6 70C 2 4 70B 0 1
R5 JACK INTERLOCK
DRILL FEED FORCE
50 0-500 JACK PROPEL
82 78A 78 98 0 A PULLDOWN FEMA ACTUATOR 0 1
PA 82 INTERLOCK INTERLOCK R6 PROPEL SELECT RELAYS
PULLDOWN FORCE B
R12B FEMA D4
RES2 LIMIT (NO BUMP)
NEUTRAL DETECT

MOUNT IN CONSOLE 70B 70B

Y STROBE LIGHT ON CAB OPTION

82 82
SV PROPEL DRILL SOLENOID VALVE
R23A DETECT
TO PWM
98R CONV. J3
7 106A WHITE
CS
R12A R14A 0-500 COM NO NC
Multifunction Control 5 6 7
R11A R5 R5

+ +
8 6 61C 8 7 60 7 8 8 6 73
80 80C
R23 R23B R19A R2A R4A
61 61A 61B 8 6 73
R13A R14B A 95 95R A
CFX TO PWM C
R23-1 TO PWM. CONV J1 1
X 0-500 CONV. J1 X
R13B 100 PROPEL MODE, CAB SIDE, MAIN PUMP
R23-1A R19B
NO 79A 79B 79C 8 7 2 5 74 SPRING RETURN TO NEUTRAL
80 BROWN WHITE 321 CAROUSEL SWING B CW 5SH B
R12 CENTER LOCKING
PROXIMITY SWITCH 79R TO PWM R3-1A DN/FWD
- CONV. J1 5
-
R13 CAB
5 GROUND
PS6 R 5SH
2 301 BRAKE RELEASE
SV
BUTTON 81 PIR
ON HANDLE D SV 5R
BROWN NO WHITE 322
1
96
80 CAROUSEL INDEX HOLDBACK VALVE CCW
R14
PROXIMITY SWITCH N UP/BKWD
R5 R5
79 3 4 4 2 74 OR 79B
9 8 7 D
PS6A

82
PULLDOWN CONTROLLER INTERLOCK
90 0 1
R7
FEED UP & DOWN CONTROLLER/ DRILL MODE
FRICTION HOLD, CENTER LOCK

70B 70B
DETECT

NEUTRAL COM
5
NO
6
NC
7
DETECT Multifunction Control 58 54

+
8 6

+
7 8
R6 R6
ROTATION / 50R PROPEL MODE
DRILL MODE TO PWM 54
A CONV. J2 A D.C.SIDE E
FRICTION
HOLD 50 MAIN PUMP
1
CRX TO PWM X
CENTER LOCK X
CONV. J2 (SPRING RETURN TO NEUTRAL,
2 5 CAB 53 CENTER LOCKING)
B CW 5SH GROUND
B
F'WD
- 5
- 301

5
R 5SH
2

D 51 PIR
1
TO PWM 5R
CCW 51R
CONV. J2
N B'WD
59 53 OR 53A
3 4 4 2
9 8 7 R6 R6 5
F

82 89 PROPEL INTERLOCK RELAY

LOCATED IN CAB CONSOLE

ROTATION CONTROLLER/ DRILL MODE PIR

FRICTION HOLD, CENTER LOCK PK4 FROM SHT4,C4 0 1 PK3 FROM SHT4,C4
6 7 80 82 5R FROM ZONE C5 3 7
5R FROM ZONE A5
6 7 80 82 5 5 FROM ZONE C5 4 8
2 6

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO 2658730014
DWG
NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 3 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

28
6 7 80 82 5

1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHEET1 FOR REVISONS

6 7 5
DRILL POSITION
R7A R8A
8 6 17 8 6 19 OX 20 0 1
R9 START INTERLOCK

DRILL/PROPEL 11
Y STROBE LIGHT ON PLATFORM REAR OPTION
OX
XO
CB3 G PROPEL MODE INDICATOR LIGHT OPTION
80 OX D5
20 A XO 70A 70A
PROPEL ALARM

80 70R TO PWM 9
R10A R11A
CONV. J3 8 6 70C 2 4 70B 0 1
R5 JACK INTERLOCK B

JACK PROPEL
0 1
82 INTERLOCK INTERLOCK R6 PROPEL SELECT RELAYS
D4
NEUTRAL DETECT

70B 70B
MP) Y STROBE LIGHT ON CAB OPTION

82
SV PROPEL DRILL SOLENOID VALVE

Multifunction Control
R13A R5 R5

+ +
8 6 60 7 8 8 6 73
U.T.DECEL
R2A
61 ROD SUP. 73
A
8 6
95 TO PWM A
RETRACT 95R
CONV. J1
CFX
TO PWM. CONV J1 1 C
X 0-500 X
100 PROPEL MODE, CAB SIDE, MAIN PUMP
R14 R11B
79A 79B 8 7 2 5 74 SPRING RETURN TO NEUTRAL
B CW 5SH B
CENTER LOCKING
79R TO PWM DN/FWD
-
PROPEL INTERLOCK RELAY
CONV. J1

CAB
5
- LOCATED IN CAB CONSOLE

5 GROUND PIR
R 5SH
2 PK4 FROM SHT4,C4 0 1 PK3 FROM SHT4,C4
BUTTON 81 PIR
ON HANDLE D SV 5R 5R FROM ZONE C5 3 7
1
96 5R FROM ZONE A5
HOLDBACK VALVE CCW
N UP/BKWD 5 FROM ZONE C5 4 8
R5 R5 2 6
79 3 4 4 2 74 OR 79B
9 8 7
D

82
PULLDOWN CONTROLLER INTERLOCK
90 0 1
R7
FEED UP & DOWN CONTROLLER/ DRILL MODE
FRICTION HOLD, CENTER LOCK

70B 70B

NEUTRAL
DETECT Multifunction Control 58 54

+
8 6

+
7 8
R6 R6
ROTATION / 50R
DRILL MODE TO PWM 54
A CONV. J2 A
FRICTION
50 E
HOLD 1
CRX TO PWM X
CENTER LOCK X
CONV. J2
2 5 CAB 53
B CW 5SH GROUND
B
PROPEL MODE
F'WD
- -
5 D.C.SIDE
MAIN PUMP
5 (SPRING RETURN TO NEUTRAL,
R 5SH
2
CENTER LOCKING)

D 51 PIR
1
TO PWM 5R
CCW 51R
CONV. J2
N B'WD
59 53 OR 53A
3 4 4 2
9 8 7 R6 R6 5
F

82 89

ROTATION CONTROLLER/ DRILL MODE

FRICTION HOLD, CENTER LOCK

6 7 80 82

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO 2658730014
DWG
NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 4 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

29
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHEET1 FOR REVISIONS

RED LION
RED LION SETTINGS: FREQUENCY
1437 HERTZ CONVERTOR
4-20mA
S1,S2,S3=OFF
MIN/MAX RESPONSE TIME = 200msec 1 2 3 RCS LITE PWM CONVERTER CIRCUIT BOARD
INSTALLED IN RCS LITE ELECTRICAL BOX
206 J4
MAGNETIC PICKUP 4 5 6 A B
205 TB-1 172299-1108
(LOCATED IN ROTARY HEAD)
IN S C 1 5
SHIELD WIRE-NOT T WATER TANK BROWN 2 6
D510 X2 PIN 1
LEVEL SENDER WHITE D510 X2 PIN 2
A
TERMINATED AT T 3 7 B
3 PIN DEUTSCH BLUE D510 X2 PIN 3
SENSOR OUT U 8
S VIEW OF PLUG END D510 X2 PIN 4
4 401
A = POWER PWM TO DIGITAL D510 X6 PIN 4
7 8 9 2
B = SIGNAL CONVERTER
D510 X6 PIN 2
1
C = GROUND D510 X6 PIN 1
PWM TO DIGITAL 3
D510 X6 PIN 3
10 11 12 CONVERTER
POWER/GROUND

J1 TP10 TP11
172299-1114 TP1 TP2 TP3
+5V +24V GND
RHS 1
3R 2

{
95R
FROM SHT 3, C6-C7 3
FROM 5 CFX
4 J5
SHT 1 79R
5 172299-1116
5 83R 6 1
D510 X7 PIN 4
84R 7 2
D510 X7 PIN 3
8 3
D510 X7 PIN 2
ALIR3 85R 9 4
D510 X8 PIN 4
0 1 TS5 86R 10 5 C
D510 X8 PIN 3
11 6
D510 X8 PIN 2
3 7 87R 12 7
D510 X9 PIN 4
88R 13 8
84R D510 X9 PIN 3

{
(TO CONTROLLER B TERMINAL) 83R 14 9 402
4 8 D510 X9 PIN 2
83 10
2 6 D510 X10 PIN 4
TO SHT 2, B6 11
84 D510 X10 PIN 3
12
D510 X10 PIN 2
13
(TO CONTROLLER A TERMINAL) 84R D510 X11 PIN 4
14
D510 X11 PIN 2
J2 15
TP4 TP5 TP6 D510 X12 PIN 4
172299-1112 16 D510 X12 PIN 2
7
PK4
8
ALIR2 (FROM A5) PK3
JK2 9
1

{
0 1 TS5 50R FOR DRILL WITH 2 NDE
FROM SHT 3, A6 2 PWM TO DIGITAL
JACKS, MOVE J8 JUMPER
51R
3 7 3 CONVERTER
TO POSITION 1-2.
CRX
4

{
D
86R 126R 1 2 3

{
(TO CONTROLLER B TERMINAL) 85R FROM SHT 2, B3 127R 5 PWM TO DIGITAL
4 8 J8
85 6 CONVERTER J6
2 6 CDX 172299-1114
TO SHT 2, C6 10
86
11 13
MAINFRAME INCLINOMETER (TO CONTROLLER A TERMINAL) 86R
(FROM SHT2, B6) 66R
(FROM SHT2, D6) 67R 12 14
7
D510
D510
X14
X14
PIN
PIN
4
2

PINOUT CHART TP7 TP8 TP9 6

5
D510
D510
X15
X15
PIN
PIN
2
4
4 PIN DEUTSCH WIRE #
D510 X18 PIN 4
8 PIN M12 FUNCTION J3 4
AUTOLEVEL D510 X18 PIN 2
3 1 MP1 POWER 172299-2114 3
INTERLOCK ALIR1 D510 X24 PIN 4
5 2 MP3 GROUND (FROM SHT2, C6) 65R 1 2 403
RELAYS 1-3 D510 X24 PIN 2
2 MP4 PITCH 0 1 TS5 2 1
3 D510 X24 PIN 1
TS4 3 8
1 4 MR4 ROLL
3 7 (FROM SHT2, C2) 98R 4 9
8 2 MR3 GROUND 5 10
88R

{
(TO CONTROLLER B TERMINAL) 87R (FROM SHT3, D7) 70R
5 4 8 AE2 6 11
4 6 87 7 12
1 4 TO SHT 2, D6 2 6 AE1

{
88 8
MP4
7 TO MAINFRAME 9
3 AUTOLEVEL MP1
(TO CONTROLLER A TERMINAL) 88R INCLINOMETER 10
ENABLE SWITCH MP3
2 1 ZONE B8 11 J7 E
(LOCATED IN MR4
12 172299-1108
8 2 3 CAB CONSOLE)
13 8
CAB POWER D510 X20 PIN 4
8 PIN M12 4 PIN DEUTSCH 14 5
WIRE 7 D510 X20 PIN 1
FEMALE END VIEW OF PLUG END 7
D510 X20 PIN 3
BYPASS SWITCH 4
D510 X21 PIN 4
(LOCATED ON CAB CONSOLE) 3 404
MP4 D510 X21 PIN 3
306 TB-2 6
LOCATED MP1 CAB POWER WIRE 7 TILT SWITCH FORWARD D510 X20 PIN 2
TS4 1 2
IN CAB MP3 24V OUTPUT WHEN ROTATION WHITE D510 X21 PIN 2
5 2 1
MR4 PITCH & ROLL < 6 PRESSURE BROWN D510 X21 PIN 1
3
SENSOR BLUE

(LOCATED IN CAB CONSOLE)

TB-3
REVERSE 1
JIR WHITE
ROTATION 2
0 1 PK3 PRESSURE BROWN
3 1 8
SENSOR BLUE
JACK 3 7 TS5
FROM ALIR1,2,3
INTERLOCK 5
RELAY 9 16
4 8 F
2 6 TYPICAL CONVERTER
PLUG PINOUT
SYMBOL LEGEND VIEWED FROM WIRE SIDE
BULKHEAD CONNECTOR
BILL OF MATERIALS
335
ITEM NUMBER

BILL OF MATERIALS NUMBERING

300-399 = RCS CABLE
400-450 = HARNESS
451-475 = ETHERNET
476-500 = GPS
501-550 = OTHER

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO 2658730014
DWG
NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 5 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

30
1 2 3 4 5 6 7 8 9 10

REV ECO AND CHANGE APPRV

ZONE REVISIONS DATE
NO PAGE NO BY BY

SEE SHEET1 FOR REVISIONS

5
323
D510

PINS 1,2,5 PINS 3,4

306 305 304

X1 X19
308 TERMINATION RESISTOR (MALE) 9106182834
DISPLAY PORT X3 CAN IN
X25 CAN OUT
RELOCATE TO CCI PORT X3 WHEN CCI OPTION IS PRESENT

ALIR3 J1 B
83 83R
X7a JACK EXTEND, CABSIDE, DRILL END
X7 X13
ALIR3 J1 J5
X7b JACK RETRACT, CABSIDE, DRILL END
84 84R PWM ADDRESS
ADDRESS PLUG
OUTPUT 9106220700
33Hz

RED LION RHS

J1 X2 X20 J3
X2a ROTARY HEAD SPEED J4 J7 MAINFRAME INCLINOMETER - PITCH X20a
CONVERTOR ANALOG ANALOG
TB1 INPUT INPUT TB2
X2b WATER TANK LEVEL a=0-20mA a=0-20mA FORWARD ROTATION PRESSURE SENSOR (NCS PUMP A) X20b
309 316
310 b=0-5V b=0-5V 340
ALIR2 J1
85 85R
X8a JACK EXTEND, NON-DRILL END
X8 X14 66R 66
ALIR2 J1 J5 J6 J2 DRILL END CABSIDE JACK RETRACTED X14a
86 86R PWM DIGITAL
X8b JACK RETRACT, NON-DRILL END
OUTPUT INPUT 67R 67
33Hz DRILL END NON-CABSIDE JACK RETRACTED X14b
C

TOWER
321 DISCONNECT X3 X21 J3
X3a TOWER INCLINOMETER (PITCH) 320 J7 MAINFRAME INCLINOMETER - ROLL X21a
311 ANALOG ANALOG
1

INPUT INPUT TB3

X3b HOLDBACK PRESSURE SENSOR
2

a=0-20mA a=0-20mA REVERSE ROTATION PRESSURE SENSOR (NCS PUMP B) X21b

322 317
b=0-5V b=0-5V 345
ALIR1 J1
87 87R
X9a JACK EXTEND, NON-CABSIDE, DRILL END
X9 X15 J6 J3
ALIR1 J1 J5 NON-DRILL END NON-CABSIDE JACK RETRACTED X15a
88 88R PWM DIGITAL
X9b JACK RETRACT, NON-CABSIDE, DRILL END J6 J3
OUTPUT INPUT 65R 65
33Hz NON-DRILL END JACK RETRACTED (CENTER OR CABSIDE) X15b
JUMPER MUST BE PRESENT FOR DM75
WITH 2 NDE JACKS. REFER TO SHEET 4.

X4 X22
X4a NOT USED 325 350 NOT USED X22a
312 ANALOG ANALOG 318 D

X4b PULLDOWN PRESSURE SENSOR (CS PUMP A) INPUT INPUT BIT AIR PRESSURE SENSOR X22b

PK4
X10a PROPEL INTERLOCK PIR
X10 X16
J2 J5 355 JACK ON GROUND - DRILL END CABSIDE X16a
JK2 DIGITAL DIGITAL 314

2
X10b JACK INTERLOCK JIR
OUTPUT INPUT JACK ON GROUND - DRILL END NON-CABSIDE X16b

1
PK3

35FT TOWER ONLY X5 X23 35FT TOWER ONLY

335 330 326 360 365 370
X5a ROTARY HEAD ENCODER 313 EDIO DIGITAL NPN 319 NOT USED X23a
X5b ROTARY HEAD ENCODER INPUT INPUT TOWER UPPER CALIBRATION X23b
TOWER TOWER
DISCONNECT 376 DISCONNECT

2
J2
A 50R 4 JACK ONLY
X11a CONTROLLER-ROTATION, FORWARD COMMAND
X11 X17

1
J2 J5 375 E
B 51R PWM TO DIGITAL DIGITAL DIGITAL 315 JACK ON GROUND - NON-DRILL END NON-CABSIDE X17a
X11b CONTROLLER-ROTATION, REVERSE COMMAND
CONVERTER INPUT INPUT JACK ON GROUND - NON-DRILL END CABSIDE X17b
J2
X CRX
J1
A 95R
X6a CONTROLLER-FEED, DOWN COMMAND
X6 X24 70R 70A
J1 J4 J6 J3 PROPEL MODE SELECTED X24a
B 79R PWM TO DIGITAL DIGITAL DIGITAL
X6b CONTROLLER-FEED, UP COMMAND
CONVERTER INPUT INPUT AE1 AE2
J1 AUTOLEVEL ENABLE SWITCH X24b
X CFX
J2
A 126R NOTE: TILT SWITCH POWER AND GROUND SUPPLIED BY CAB
X12a CONTROLLER-DECK FORK, EXTEND COMMAND
X12 X18 TS4 5 TS4
J2 J5 J6 J3 ALIR TILT SWITCH X18a
B 127R PWM TO DIGITAL DIGITAL DIGITAL
X12b CONTROLLER-DECK FORK, RETRACT COMMAND
CONVERTER INPUT INPUT 98R 98
J2 CAROUSEL STOWED X18b
X CDX

I/O MODULE D510

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE

UNSPECIFIED TOLERANCES CHARACTERISTIC SYMBOL O 1in DRAWN BY LLG

WARNING THE FOLLOWING NOTE DOES NOT APPLY TO THIS PART

EPIROC PERMITTED FOR THIS ASSEMBLY UNLESS APPROVED BY

CONFIDENTIAL OR TRADE SECRET INFORMATION
THEREIN; AND (4) UPON COMPLETION OF THE NEED
TO RETAIN THE DRAWING, OR UPON DEMAND,
UNLESS OTHERWISE SPECIFIED, REMOVE PARALLELISM
FINISHED WEIGHT SIZE A3 REF.NO
DWG
2658730014 NO. 2310133078 P
DRILLING SOLUTIONS EPIROC DRILLING SOLUTIONS ALL BURRS AND SHARP CORNERS AND
2310133078 SH 6 OF 6
RETURN THE DRAWING, ALL COPIES THEREOF, AND POSITION
COMM.
ALL RIGHTS RESERVED ALL MATERIAL COPIED THEREFROM. COUNTERSINK TAPPED HOLES TO BODY SIZE. SCALE
CONCENTRICITY NO.

31
32
Hydraulic Diagram
LIST OF CONTENTS
Part no Description Remarks Page
2310110594 HYDRAULIC SCHEM 34 - 36

33
34
35
36
epiroc.com

Hydraulic Schematic
No ratings yet
Hydraulic Schematic
3 pages
CNN008311 Diagrams and Drawings
No ratings yet
CNN008311 Diagrams and Drawings
40 pages
Epiroc DM-30 Diagrams and Drawings
No ratings yet
Epiroc DM-30 Diagrams and Drawings
34 pages
Planos 9978
50% (2)
Planos 9978
34 pages
Elec Schematic 2658488584 - 015
No ratings yet
Elec Schematic 2658488584 - 015
24 pages
Ele Schematic 2658370977 - 027
No ratings yet
Ele Schematic 2658370977 - 027
32 pages
MTU 12V4000 ENGINE: To Hyd Stairs 125A Mega Fuse Gli Box 80A Mega Fuse Box 4 JR/B3P
No ratings yet
MTU 12V4000 ENGINE: To Hyd Stairs 125A Mega Fuse Gli Box 80A Mega Fuse Box 4 JR/B3P
1 page
I/O Module Power Pack Box
No ratings yet
I/O Module Power Pack Box
1 page
D Weld Procedures Schematic, Electrical, Rcs4 10 24: SHT 2-8B SHT 3-6B
No ratings yet
D Weld Procedures Schematic, Electrical, Rcs4 10 24: SHT 2-8B SHT 3-6B
1 page
PV-351 RCS5
No ratings yet
PV-351 RCS5
26 pages
NuevoDocumento 2019-12-08 19.33.12
100% (1)
NuevoDocumento 2019-12-08 19.33.12
40 pages
Ele Schematic 2658369444 - 019
No ratings yet
Ele Schematic 2658369444 - 019
16 pages
RD23 Diagrams Epiroc
No ratings yet
RD23 Diagrams Epiroc
82 pages
CAB 12 Volt System: D Weld Procedures Schematic, Electrical, Rcs4 8 24
No ratings yet
CAB 12 Volt System: D Weld Procedures Schematic, Electrical, Rcs4 8 24
1 page
PV270 Electrical Schematic
No ratings yet
PV270 Electrical Schematic
53 pages
Pit Viper 351 RCS 5
100% (1)
Pit Viper 351 RCS 5
31 pages
106.87 SM FM Eng
No ratings yet
106.87 SM FM Eng
35 pages
Circuit Diagramss
No ratings yet
Circuit Diagramss
52 pages
Abrir PV Planos SCHEM, ELEC, RCS5
No ratings yet
Abrir PV Planos SCHEM, ELEC, RCS5
26 pages
DM75 Brochure ENG A4
No ratings yet
DM75 Brochure ENG A4
12 pages
DM75 Blasthole Drills: Multi-Pass Rotary Drilling
No ratings yet
DM75 Blasthole Drills: Multi-Pass Rotary Drilling
7 pages
Ac3 700 - 900HP SS
No ratings yet
Ac3 700 - 900HP SS
11 pages
Hyster B214 Electrical System - 1638483-2200SRM1279 (05-2006)
100% (2)
Hyster B214 Electrical System - 1638483-2200SRM1279 (05-2006)
18 pages
Pito Viper 271 Diagrams and Drawings
No ratings yet
Pito Viper 271 Diagrams and Drawings
88 pages
DM30 XC Blasthole Drills: Otary and Down-The-Hole (DTH) Drilling
No ratings yet
DM30 XC Blasthole Drills: Otary and Down-The-Hole (DTH) Drilling
7 pages
Boomer E10 E20
No ratings yet
Boomer E10 E20
5 pages
SC Reference
No ratings yet
SC Reference
7 pages
Hyd Schematic 2658549085 - 009
No ratings yet
Hyd Schematic 2658549085 - 009
4 pages
Hyd Schematic 2658487205 - 005
100% (2)
Hyd Schematic 2658487205 - 005
3 pages
L PDF
No ratings yet
L PDF
7 pages
Elect Int
No ratings yet
Elect Int
13 pages
9863 0002 01 DM45-50 Brochure English Web
No ratings yet
9863 0002 01 DM45-50 Brochure English Web
7 pages
DM45-50 Brochure English
No ratings yet
DM45-50 Brochure English
12 pages
9869 0222 01d - Simba M40 S Technical Specification - English
No ratings yet
9869 0222 01d - Simba M40 S Technical Specification - English
5 pages
9863 0003 01 DML Brochure English Web
No ratings yet
9863 0003 01 DML Brochure English Web
7 pages
Ditch Witch JT1720 - Owner Manual
100% (1)
Ditch Witch JT1720 - Owner Manual
179 pages
Simba E70s
No ratings yet
Simba E70s
5 pages
Mining Drill Solutions for Efficiency
100% (2)
Mining Drill Solutions for Efficiency
7 pages
9863 0097 01 Pit Viper 271 XC E Brochure English Web
No ratings yet
9863 0097 01 Pit Viper 271 XC E Brochure English Web
7 pages
DECAL, WIRING SCHEMATIC (Xe), VFD, SD, AIR COOLED
No ratings yet
DECAL, WIRING SCHEMATIC (Xe), VFD, SD, AIR COOLED
4 pages
9869 0222 01f Simba M40 S Technical Specification English
No ratings yet
9869 0222 01f Simba M40 S Technical Specification English
5 pages
Esquema Eletrico
No ratings yet
Esquema Eletrico
31 pages
DECAL, WIRING SCHEMATIC (Xe), VFD, SD, WATER COOLED
No ratings yet
DECAL, WIRING SCHEMATIC (Xe), VFD, SD, WATER COOLED
4 pages
8999 5520 00 Diagrams and Drawings
No ratings yet
8999 5520 00 Diagrams and Drawings
66 pages
Manual Del Operador Jt2720
No ratings yet
Manual Del Operador Jt2720
183 pages
Decal, Schematic SD / 60 HZ Electro-Mech 22182349 H
100% (1)
Decal, Schematic SD / 60 HZ Electro-Mech 22182349 H
2 pages
SEC6
No ratings yet
SEC6
408 pages
Pit Viper 271 XC Blasthole Drills: Single-Pass Rotary and Down-The-Hole (DTH) Drilling
No ratings yet
Pit Viper 271 XC Blasthole Drills: Single-Pass Rotary and Down-The-Hole (DTH) Drilling
7 pages
Boomer 291 Sales Presentation - 2018 - EN
100% (1)
Boomer 291 Sales Presentation - 2018 - EN
39 pages
Man Inst Cpa295
No ratings yet
Man Inst Cpa295
208 pages
Pit Viper PV-271 XC Blasthole Drills: Single-Pass Rotary and Down-The-Hole (DTH) Drilling
100% (1)
Pit Viper PV-271 XC Blasthole Drills: Single-Pass Rotary and Down-The-Hole (DTH) Drilling
7 pages
Midrange Ops Tier3 2005
No ratings yet
Midrange Ops Tier3 2005
774 pages
My Center Manual
50% (2)
My Center Manual
223 pages
Varco Tds 11sa顶驱新图2014年
No ratings yet
Varco Tds 11sa顶驱新图2014年
261 pages
R55-75n - Eletrica
No ratings yet
R55-75n - Eletrica
3 pages
Easer E10s
No ratings yet
Easer E10s
5 pages
D811001369 CL st-MAN-002 - Rev 05 - D811001369-MAN-002 - Rev05
100% (1)
D811001369 CL st-MAN-002 - Rev 05 - D811001369-MAN-002 - Rev05
225 pages
湖南发品Quotation- Montabert Epiroc Parts - 不含税
No ratings yet
湖南发品Quotation- Montabert Epiroc Parts - 不含税
3 pages
Manual M F
No ratings yet
Manual M F
4 pages
9853 6968 01e Spare Parts SpeedRoc D30
No ratings yet
9853 6968 01e Spare Parts SpeedRoc D30
287 pages
Handbook of Automotive Power Electronics and Motor Drives (Emadi, A. 2006) (Book News)
No ratings yet
Handbook of Automotive Power Electronics and Motor Drives (Emadi, A. 2006) (Book News)
3 pages
Jay's Motors - 230310 - 175942
No ratings yet
Jay's Motors - 230310 - 175942
2 pages
300V 4T Factory Line 5W-30: Racing Motorcycle Lubricant 100% Synthetic
No ratings yet
300V 4T Factory Line 5W-30: Racing Motorcycle Lubricant 100% Synthetic
1 page
Q2 Automotive Servicing 12 Module 1-2
100% (1)
Q2 Automotive Servicing 12 Module 1-2
49 pages
PLATFUSI Laguna 3 Sigurante
No ratings yet
PLATFUSI Laguna 3 Sigurante
62 pages
DA 6 V Pressure Cut-off Valve Guide
No ratings yet
DA 6 V Pressure Cut-off Valve Guide
12 pages
Manual: Installation: Encine Type: Engine Number
No ratings yet
Manual: Installation: Encine Type: Engine Number
250 pages
NTB02 032
No ratings yet
NTB02 032
5 pages
Bodywork 4
No ratings yet
Bodywork 4
43 pages
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques To 27,624 LB - in
No ratings yet
Spring Return and Double Acting Pneumatic Quarter-Turn Actuators For Output Torques To 27,624 LB - in
8 pages
Hangchacbd20 TC1
No ratings yet
Hangchacbd20 TC1
3 pages
Hydraulic Hoist With Free Fall
No ratings yet
Hydraulic Hoist With Free Fall
8 pages
2007 Camry Tvip V4 Remote Engine Starter (Res) (Without Smart Key System) Electrical Wiring Diagram (Ewd)
No ratings yet
2007 Camry Tvip V4 Remote Engine Starter (Res) (Without Smart Key System) Electrical Wiring Diagram (Ewd)
2 pages
Jamesbury VPVL
No ratings yet
Jamesbury VPVL
16 pages
Renault Xenon Bulb Diagnostics
100% (1)
Renault Xenon Bulb Diagnostics
38 pages
Volume Efficiency of A Compressor
No ratings yet
Volume Efficiency of A Compressor
13 pages
Ma3000f 980
No ratings yet
Ma3000f 980
3 pages
Ev Iitb
No ratings yet
Ev Iitb
16 pages
Technical Note - Diagnostics: I - Subject: Programming An Electronic Control Unit
100% (1)
Technical Note - Diagnostics: I - Subject: Programming An Electronic Control Unit
7 pages
Landing Gear Operating Guide
100% (1)
Landing Gear Operating Guide
8 pages
JCB Elecrical System-1
100% (1)
JCB Elecrical System-1
255 pages
Im Iod 1056b
No ratings yet
Im Iod 1056b
16 pages
SAEJ1735 V 001
No ratings yet
SAEJ1735 V 001
17 pages
Engine Component Assembly List
No ratings yet
Engine Component Assembly List
15 pages
Eaton Transmission Clutch Housing Selector cmt1540 en Us
No ratings yet
Eaton Transmission Clutch Housing Selector cmt1540 en Us
4 pages
Kyocera F-1800 Parts Guide
No ratings yet
Kyocera F-1800 Parts Guide
30 pages
06 04 Om HP675 HP750 XP750 XP825 Wcu
No ratings yet
06 04 Om HP675 HP750 XP750 XP825 Wcu
73 pages
25FT Diagrams & System Flow Charts
No ratings yet
25FT Diagrams & System Flow Charts
51 pages
AF 100329414 Rev A
No ratings yet
AF 100329414 Rev A
32 pages
Calidus Periodic Service Worksheet V6 Sep 2021
No ratings yet
Calidus Periodic Service Worksheet V6 Sep 2021
9 pages