Scribd
Upload
30 views2 pages

Instructions

The document provides instructions for downloading and using printing profiles for various slicing software, primarily supporting Chitubox. It includes baseline printing settings for different monochrome LCD printers and emphasizes the importance of checking exposure times and speed settings after importing profiles. Additional resources are available for creating custom profiles and troubleshooting prints.

Uploaded by

cool.samin.ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views2 pages

Instructions

The document provides instructions for downloading and using printing profiles for various slicing software, primarily supporting Chitubox. It includes baseline printing settings for different monochrome LCD printers and emphasizes the importance of checking exposure times and speed settings after importing profiles. Additional resources are available for creating custom profiles and troubleshooting prints.

Uploaded by

cool.samin.ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

®

PRINTING PROFILE INSTRUCTIONS:

Read Before Downloading the Printing Profiles.


In this folder, you will find the various printing profiles divided into
different folders based on the Slicing software for which they were created.
Although we officially support the creation of printing profiles only with
Chitubox (free and high-performing), there are some folders dedicated to
other types of Software. If your printer is not listed in a folder, we invite
you to check the other directories. If your printer is not present in any
folder, these are average parameters valid for all LCD printers.

Baseline Printing Settings for Monochrome LCD Printers (X-One – X-Filigree


– X-Nova resins and future resins)
Layer Height – 0.03 mm
Bottom Layer count – 10
Bottom Exposure Time – 30 s
Layer Exposure Time – 8.5 s
Rest Time Before Print – 1 s
Bottom layer speeds – 50 mm/min
layer speeds – 150 mm/min

Baseline Printing Settings for Monochrome LCD Printers (X-5 – X-10 – Cr3a)
Layer Height – 0.03 mm
Bottom Layer count – 10
Bottom Exposure Time – 35 s
Layer Exposure Time – 4.5 s
Rest Time Before Print – 1 s
Bottom layer speeds – 50 mm/min
layer speeds – 150 mm/min

Should the prints not be satisfactory, you can read the document “How to
Create a castable resin printing profile” and use the file “Exposure test file”.

1
®

After importing the printing profile, you need to check the following points.
If you see something of incorrect, please contact us.

- 1 LAYER EXPOSURE
Standard layer exposure times for X-One, X-Filigree, X-Nova, and Dental
Cast resins, as well as new products, should be between 6.5 and 8 seconds
for all LCD printers.

Standard layer exposure times for X-5, X-10, Cr3a, and Fast dental model
resins should be under 5 seconds for all LCD printers.

- 2 ADVANCED OPTIONS
The Gray level has to be always off.

- 3 SPEEDS
The two columns have to be completed.
No value can be 0.00. This is crucial to
ensure proper printing results.

You can find instructions on how to import the profiles at the link
https://www.bluecast.info/download#how-to-use-printing-profile

You might also like