Details prepared by gamma.

ap

ATT Sp. z o. o. 16C Albatrosów St., 30-716 Kraków, Poland tel. +48 12 290 29 30 fax +48 12 290 29 31 e-mail:
[email protected] www.attinox.com www.bim.att.eu

Follow us on LinkedIn. We have always something to say. Beside this, we share with you our projects, realizations,
files and events!

Mail - [email protected]

Catalog - www.attinox.com

BIM library - www.bim.att.eu

ATT STAINLESS STEEL ENGINEERING

Table of Content
ATT STAINLESS STEEL ENGINEERING

ABOUT THE COMPANY 2 HYGIENE SOLUTIONS 5 FLOOR DRAINS 12 LINEAR DRAINAGE 61

BATHROOM SOLUTIONS 75 MANHOLE COVERS 83 PROTECTIVE ELEMENTS 100 PLATFORMS AND
STRUCTURES 104 FOOD INDUSTRY FACILITIES EQUIPMENT 112 DISPENSERS 117

THE COMPANY
ATT is a manufacturing and trading company offering stainless steel elements. We employ highly qualified personnel
and operate a technologically advanced machine park. This allows us to comprehensively implement entrusted tasks –
from technical consultancy in the design phase and through the production process to assembly.

ATT is a team of engineers with extensive knowledge and passion combined with imagination and long-term
experience. This combination of elements is reflected in the projects we develop and implement. Our comprehensive
technical know-how corresponding to the realities in the construction industry and industrial facilities, means we can
optimally tailor solutions to meet the needs of individual customers.

The commercial division is made up of sales engineers who participate in the entire process.

They are present at each phase of implementation of an order: during preparation of projects, production, assembly and
installation works, acting as technical advisers.
The scope of ATT's operations is not limited to Poland or European countries. Our goods and services are used by
companies from the United States, the United Arab Emirates, South Korea and Australia, to name a few.

We prepare elements of equipment and installation systems for facilities of the food, gastronomic, chemical and
pharmaceutical industries.

The majority of our products can be found on our website at www.att.eu, available in several language versions.

CERTIFICATES
ATT INOX DRAIN® , a company with Polish capital, was established nearly twenty years ago. Since the beginning
of its activity, stainless steel drainage systems have been the key products of the company. In addition to the catalogue
products, we also develop individual designs adapted to requirements resulting from the needs of a project. This is
achieved thanks to our qualified personnel and technologically advanced machine park. Importantly, ATT drainage
systems meet the highest requirements of the European Hygiene Standards PN-EN 1253 (point drainage) and PN-EN
1433 (linear drainage)

However, ATT offers more than just drainage systems. In response to the demands of the market and in order to fully
implement its production potential, the company has launched production of equipment elements and stainless steel
structures for industries where the highest phytosanitary requirements must be met.

The hygienic safety of all products manufactured by ATT is assured by fulfilling the guidelines of the Polish Hygiene
Institute (certificate no. HK/B/0266/01/2015). Moreover, to ensure that our products meet the

strictest hygiene requirements, in the design phase we follow this guidelines included in the listed standards: PN-EN
1672-2+A1:2009 – hygiene requirements, and

PN-EN ISO 14159:2008 – hygiene requirements related to the designing of machines.

ATT is also a member of the European Hygienic

Engineering and Design Group, an organisation that constitutes a communication platform for global food corporations,
manufacturers of

machines and devices, as well as members of research

institutes and public health protection institutions. EHEDG members cooperate in order to promote and improve
hygiene in food production plants. As a result, ATT's products are designed and manufactured in accordance with the
most recent guidelines on hygiene requirements.

Our products are CE marked.

On 1 July 2014, the transition period for marking in the nationwide system came to an end.
After this date, structural elements made of steel or aluminium must be CE marked to be elegible for marketing. This
means that ATT meets the requirements of the following standards:

PN-EN 1090-1:2012 part 1: Rules of compliance assessment for constructional components; and PN-EN 1090-2:2012
part 2: Technical requirements for steel structures.

Another step enabling monitoring of the production process in ATT is the implementation of standards that guaranteed
supervision of the welding process, i.e. standards of PN-EN ISO 3834:2007 series. They include quality requirements
related to welding of metal materials.

We have carried out implementation of PN – EN 1090 and PN EN ISO 3834 in cooperation with TÜV Rheinland.

OFFER

industrial, external drainage systems and drainage systems for buildings

manhole covers, access covers and media boxes

platforms, construction elements and technological installation

equipment for food, pharmaceutical and chemical industries facilities

protective elements (bollards, barriers, kerbs, buffering tiles)

design and installation services

STAINLESS STEEL
STAINLESS STEEL

STEEL PROPERTIES

The term "stainless steel" refers to grades of raw materials with increased resistance to corrosion when compared to
normal alloy steels.

Stainless steels are iron alloys that contain a minimum of 11% chrome. They owe their high anti-corrosion properties to
the production of a top layer of chromium oxides.

This layer is characterised by high durability. Even in cases mechanical or chemical damage to the steel surface, the
anti-corrosive properties of the material are maintained.

STAINLESS STEEL TYPES

austenitic – it features very good anti-corrosion properties and is used in the food, chemical, and pharmaceutical
industries – carbon content 0.02%.

martensitic – it features the highest mechanical durability among all groups of steel and magnetic properties; it is
subject to heat treatment and is characterised by a high carbon content of approximately 0.3%.

austenitic-ferritic – melted in a duplex process, it features good anti-corrosion properties and high resistance to
cracking. It is a magnetic steel, unsuitable for installation elements.

PRODUCTION MATERIAL

The following steels are the basic production materials: AISI 304, EN 1.4301 and AISI 316L, EN 1.4404. In case of
necessity to produce elements using steels of other grades, the company manufactures these elements upon the Client's
request. In case of decorative products (interior design), there is a possibility to order elements made of ground sheets
or perform grinding after treatment.

STAINLESS STEEL

The following information was compiled based on our know-how and long-term experience in stainless steel
processing.Resistance of the material to a given factor may only be guaranteed by laboratory tests confirming the
chemical resistance to a given medium.

TABLE OF CHEMICAL RESISTANCE OF MATERIALS

Chemical Temp. Co STEEL 1.4301 304 STEEL 1.4404 3161 acetone 20 < 0.1 < 0.1 methyl alcohol 20 < 0.1 < 0.1
alcohol propyl 20 < 0.1 < 0.1 ammonia - gas (dry) 20 < 0.1 < 0.1 ammonia boiling p. < 0.1 < 0.1 aniline 20 < 0.1 < 0.1
ammonium nitrate 20 < 0.1 < 0.1 copper nitrate 20 < 0.1 < 0.1 silver nitrate 20 < 0.1 < 0.1 benzene 20 < 0.1 < 0.1
petroleum oils 20 < 0.1 < 0.1 tan liquor 20 < 0.1 < 0.1 butane 20 < 0 .1 < 0.1 chlorine (wet) 20 > 1 > 1 chlorine (dry)
100% 70 < 0 .1 < 0.1 ammonium chloride 20 0.1 - 1 0.1 - 1 ammonium chloride 20% boiling p. 0.1 - 1 SP < 0.1 SP
ammonium chloride 43% boiling p. < 0.1 SP < 0.1 SP amyl chloride 20 < 0.1 < 0.1 barium chloride 20 < 0.1 < 0.1 zinc
chloride 20 0.1 - 1 0.1 - 1 tin chloride 20 > 1 < 0.1 ethyl chloride (chloroethane) 20 < 0.1 < 0.1 aluminum chloride 20
0.1 - 1 0.1 - 1 magnesium chloride 20 > 1 > 1 methyl chloride 20 < 0.1 < 0.1 cupric chloride 20 > 1 > 1 nickel chloride
20 > 1 > 1 potassium chloride 20 < 0.1 < 0.1 sodium chloride 3% 20-60 0.1 - 1 P < 0.1 P calcium chloride 20 > 1 0.1 -
1 calcium chloride 20% 20 < 0.1 P < 0.1 P calcium chloride 20% boiling p. 0.1 - 1 SP < 0.1 P chlorobenzene 20 < 0.1 <
0.1 chloroform 20 20 0.1 - 1 < 0.1 0.1 - 1 < 0.1 cupric cyanide 20 < 0.1 < 0.1 potassium cyanide 20 < 0.1 < 0.1 sodium
cyanide 20 < 0.1 < 0.1 cyclohexane 20 < 0.1 < 0.1 cyclohexanone 20 < 0.1 < 0.1 carbon tetrachloride 20 < 0.1 < 0.1
diethylamine 20 < 0.1 < 0.1 dimethylaniline 20 < 0.1 < 0.1 bichloride of potassium 20 < 0.1 < 0.1 sodium disulphide 20
< 0.1 < 0.1 carbon disulphide sulfur dioxide (dry) 20 > 1 < 0.1 < 0.1 sulfur dioxide (wet) 20 20 × < 0.1 < 0.1 carbon
dioxide 20 < 0 1 < 0 1 sodium bicarbonate 5% 20 < 0.1 < 0.1 phenol

Chemical Temp. Co STEEL 1.4301 304 STEEL 1.4404 316L formaldehyde 37% 20 < 0.1 < 0.1 ammonium phosphate
20 0.1 - 1 > 1 disodium phosphate 20 x x trisodium phosphate 20 < 0.1 < 0.1 freon 12 20 < 0.1 < 0.1 furfural 20 < 0.1 <
0.1 fluorine gas (wet) 20 >1 > 1 propane gas 20 < 0.1 < 0.1 glycerine 20 < 0.1 < 0.1 ethylene glycol 20 < 0.1 < 0.1
glucose 20 < 0.1 < 0.1 hydroquinone 20 < 0.1 < 0.1 iodine 20 >1 > 1 methyl ethyl ketone 20 < 0.1 < 0.1 xylene 20 <
0.1 < 0.1 nitric acid 30% boiling p. < 0.1 < 0.1 nitric acid nitric acid 50% 65% boiling p. 80 0.1 - 1 < 0.1 0.1 - 1 < 0.1
nitric acid 65% boiling p. 0.1 - 1 0.1 - 1 benzoic acid 20 < 0.1 < 0.1 boric acid 20 < 0.1 < 0.1 hydrobromic acid 20% 20
> 1 > 1 bromic acid 20 0.1 - 1 0.1 - 1 chloroacetic acid 20 0.1 - 1 0.1 - 1 chromic acid 50% 20 > 1 > 1 chromic acid
10% 20 < 0.1 < 0.1 citric acid 25% boiling p. > 1 < 0.1 citric acid 50% 20 < 0.1 < 0.1 phosphoric acid 20% boiling p. <
0.1 < 0.1 phosphoric acid 40% boiling p. < 0.1 0.1 - 1 phosphoric acid 85% ರಿನ > 1 < 0.1 maleic acid 20 < 0.1 < 0.1
lactic acid 10% 10-100 0.1 - 1 < 0.1 lactic acid 25% 20 < 0.1 < 0.1 lactic acid 50% 20-80 0.1 - 1 < 0.1 lactic acid 50%
boiling p. > 1 0.1 - 1 formic acid 5-10% 20 < 0.1 < 0.1 formic acid 10% 80 > 1 < 0.1 formic acid 50% 24-40 0.1 - 1 <
0.1 formic acid 50% 90% boiling p. 20 > 1 > 1 0.1 - 1 < 0.1 formic acid 10% 20 > 1 > 1 perchloric acid 70% 20 > 1 > 1
perchloric acid 1% boiling p. < 0.1 < 0.1 acetic acid 10% boiling p. 0.1 - 1 < 0.1 acetic acid 20% boiling p. > 1 < 0.1
acetic acid acetic acid 20% 20 < 0.1 < 0.1 acetic acid 80% 20 > 1 < 0.1 acetic acid 100% boiling p. > 1 < 0.1 oleic acid
20 < 0.1 < 0.1

TABLE OF CHEMICAL RESISTANCE OF MATERIALS

Chemical Temp. Co STEEL 1.4301 304 STEEL 1.4404 316 L Chemical hypochlorous acid (chlorine water) 20 > 1 > 1
sodium sulphate palmitic acid 10% 20 < 0.1 < 0.1 silver sulphate picric acid 20 < 0.1 < 0.1 calcium sulphate prussic
acid 20 < 0.1 < 0.1 ferrous sulphate sulphurous acid 20 0.1 - 1 < 0.1 ammonium sulphide sulphuric acid 1% 100 > 1 0.1
- 1 barium sulphide sulphuric acid 5% 20 0.1 - 1 < 0.1 sodium sulphide sulphuric acid 5% boiling p. > 1 > 1 sodium
sulphite sulphuric acid 10% 20 > 1 < 0.1 sulphuric acid 10% boiling p. > 1 > 1 sulphur sulphuric acid 50% 20 > 1 > 1
caustic soda sulphuric acid 70% 20 > 1 > 1 caustic soda sulphuric acid 20-90% 20-100 > 1 > 1 caustic soda sulphuric
acid 93% 20 > 1 > 1 fruit juices and pulp hydrochloric acid 0.5% 20 0.1 - 1 P < 0.1 P tannin (tannic acid) hydrochloric
acid 0.5% boiling p. > 1 > 1 turpentine hydrochloric acid 1% 20 0.1 - 1 P < 0.1 P sodium thiosulfate hydrochloric acid
40% 20 > 1 > 1 carbon monoxide stearic acid 20 < 0.1 < 0.1 toluene oxalic acid 20 < 0.1 < 0.1 triethylamine carbonic
acid 20 < 0.1 < 0.1 phosphorous trichloride tartaric acid 20 > 1 0.1 - 1 trichlorethylene fatty acids 20 < 0.1 < 0.1 cresol
20 < 0.1 < 0.1 sugar beet syrup milk 20 < 0.1 < 0.1 sugarcane sap urine 20 < 0.1 < 0.1 potassium carbonate urea
(carbamide) 20 < 0.1 < 0.1 sodium carbonate potassium permanganate 20 < 0.1 < 0.1 calcium carbonate hydrogen
peroxide 90% 20 < 0.1 < 0.1 whiskey oil 20 < 0.1 < 0.1 wine vinegar 20 < 0.1 < 0.1 bromine water ethyl acetate 20 <
0.1 < 0.1 chlorinated water cottonseed oil 20 < 0.1 < 0.1 chlorinated water linseed oil 20 < 0.1 < 0.1 chlorinated water
oils and fats 20 < 0.1 < 0.1 distilled water mineral oils 20 x x water ("acid mine") petroleum oils 20 < 0.1 < 0.1 sea
water (natural) oleum 20 < 0.1 < 0.1 beer 20 < 0.1 < 0.1 water (fresh) sodium hypochlorite 20 0.1 - 1 < 0.1 water (salt)
calcium hypochlorite 20 > 1 < 0.1 0.1 - 1 ammonium hydroxide caustic potash 20 < 0.1 barium hydroxide photographic
solutions 20 > 1 > 1 potassium hydroxide electroplating solutions 20 < 0.1 < 0.1 sodium hydroxide ammonium sulphate
20 0.1 - 1 < 0.1 calcium hydroxide barium sulphate 20 < 0.1 < 0.1 bleach zinc sulphate 20 < 0.1 < 0.1 sodium base
aluminum sulphate 20 < 0.1 < 0.1 sodium base magnesium sulphate 20 < 0 1 < 0 1 sodium base copper sulphate 20 <
0.1 < 0.1 sodium ferrocyanide nickel sulphate 20 < 0.1 < 0.1

Chemical Temp. Co STEEL 1.4301 304 STEEL 1.4404 3161 sodium sulphate 20 < 0.1 < 0.1 silver sulphate 20 < 0.1 <
0.1 calcium sulphate 20 < 0.1 < 0.1 ferrous sulphate 20 < 0.1 < 0.1 ammonium sulphide 20 < 0.1 < 0.1 barium sulphide
20 × × sodium sulphide 20 0.1 - 1 > 1 sodium sulphite 20 0.1 - 1 < 0.1 sulphur 20 0.1 - 1 < 0.1 caustic soda 20% 20 <
0.1 < 0.1 caustic soda 50% 20 < 0.1 < 0.1 caustic soda 80% 20 > 1 < 0.1 fruit juices and pulp 20 0.1 - 1 < 0.1 tannin
(tannic acid) 20 < 0.1 < 0.1 turpentine 20 < 0.1 < 0.1 sodium thiosulfate 20 < 0.1 < 0.1 carbon monoxide 20 < 0.1 < 0.1
toluene 20 < 0.1 < 0.1 triethylamine 20 < 0.1 < 0.1 phosphorous trichloride 20 < 0.1 < 0.1 trichlorethylene 20 < 0.1 <
0.1 sugar beet syrup 20 < 0.1 < 0.1 sugarcane sap 20 × × potassium carbonate 20 < 0.1 < 0.1 sodium carbonate 20 < 0.1
< 0.1 calcium carbonate 20 < 0.1 < 0.1 whiskey 20 < 0.1 < 0.1 wine 20 < 0.1 < 0.1 bromine water 20 > 1 > 1
chlorinated water 20 > 1 0.1 -1 P chlorinated water 1g/l 20 0.1 -1 P 0.1 -1 P chlorinated water 1 mg/l 20 < 0.1 < 0.1
distilled water 20 < 0.1 < 0.1 water ("acid mine") 20 < 0.1 < 0.1 sea water (natural) 20 0.1 -1 P < 0.1 P water (fresh) 20
< 0.1 < 0.1 water (salt) 20 < 0.1 < 0.1 ammonium hydroxide 20 < 0.1 < 0.1 barium hydroxide 10% 20 × x potassium
hydroxide 20 < 0.1 < 0.1 sodium hydroxide 20 0.1 - 1 < 0.1 calcium hydroxide 20 0.1 - 1 < 0.1 bleach 12,5% Cl 20 × ×
sodium base 20% 50 < 0.1 < 0.1 sodium base 20% 100 < 0.1 < 0.1 sodium base 40% 100 0.1 -1 < 0.1 sodium
ferrocyanide 20 < 0.1 < 0.1

TABLE DESIGNATIONS

Corrosion factor ([mm]/year)

complete stress corrosion risk partial pitting corrosion risk non-resistant lack of data

Resistance Corrosion agent

FLOOR DRAINS
12

FLOOR DRAINS
GENERAL INFORMATION

By standard, all floor drains and rodding eyes are made of stainless steel: AISI 304, EN 1.4301 and AISI 316L, EN
1.4404. The type of drain depends on the load class, the amount of drained liquid (medium) and design parameters (e.g.
ceiling thickness).

Floor drains are made of sheet metal of thickness adapted to a defined type of drain. All elements are welded using
argon shield,and then are pickled, thus ensuring high quality of joints.

ADVANTAGES OF FLOOR DRAINS

 highest hygienic design and construction standards, following EHEDG guidelines,

 possibility to select a grate depending on application and load class,
 easy installation,
 due to suitable trap design, each gully is also the sewer rodding eye,
 simple design,
 easy and effective cleaning.

Parameter Technical information Frame shape Square / Round Frame dimensions for square floor drains (mm)
Standard from 100x100 to 400x400 Other sizes on request Frame diameter for round floor drains (mm) Standard from
150 to 300 Other sizes on request Body design One piece / Two pieces Type of outlet Vertical / Horizontal Size of
outlet (external diameter, mm) From 50 to 200 Capacity (l/s) From 0.9 to 13.9 Total height (mm) From 58 to 440 Type
of grating Mesh / Ladder / perf. plate / plate

HOW TO READ CATALOG DESIGNATIONS

heavy duty floor drain with square upper part mini floor drain with square upper part upper part dimension horizontal
single part perforated sheet grating ladder grating anti-slip grating heavy duty floor drain with round upper part mini
floor drain with round upper part outlet diameter vertical two part plate grating plate grating with circumference gasket
(so-called "tight cover")

EXAMPLE 1

W300/160V2-K an industrial drain, with a square top 300 [mm], an outlet diameter of 160 [mm], vertical, twopart,
with a mesh grating.

EXAMPLE 2

D260/110V1-S an industrial drain, with a round top 260 [mm], an outlet diameter of 110 [mm], vertical, single-part,
with a tight plate cover (plate grating with a circumference gasket)

CHOOSE THE DRAIN YOU NEED

SELECTION OF FLOOR DRAINS

Appropriate floor drains are selected based on 2 main parameters:

1. Amount of drained wastewater (selection of appropriate diameter of the outlet and the size of the upper part). 2.
The load value, type and intensity (the grating is the load-bearing element, which, depending on the type and
height, will transfer the applied load).

FLOOR DRAINS
EXAMPLE SINGLE PART DRAIN EXAMPLE TWO PART DRAIN

DESCRIPTION OF THE FLOOR DRAINS COMPONENTS

Bodies – round shape limits waste accumulation and enables easy waste removal. The welded joints are grinded to
remove sharp edges and ensure safe installation or cleaning.

Gratings – available in various shapes, dimensions and finishing versions. The gratings are selected according to the
loads and location of installation. We offer the following grating types: mesh anti-slip, ladder, plate and perforated
sheet.

Waste baskets - recommended when the drained wastewater has a high content of solids.

Strainers – used when the amount of solids is small.

Traps – very functional and easy to maintain. Ensures easy access to the sewer, quick cleaning and offers a possibility
of checking for locks.

Flanges - used when it's necessary to drain water from horizontal systems installed under the floor.
AVAILABLE LOAD CLASSES OF FLOOR DRAINS INSTALLED IN
BUILDINGS AS PER PN-EN 1253

H1.5 (1.5 kN)

selected for flat roofs (with no other function)

K3 (3 kN)
pedestrian zones (e.g. swimming pools, balconies)

L15 (15 kN)

commercial premises with low vehicular traffic

R50 (50kN)
areas with vehicular traffic (e.g. factories)

M125 (125 kN)

areas with intense vehicular traffic takes place (e.g. workshops, industrial halls)

N250 (250 kN)

areas with heavy duty vehicular traffic (e.g. workshops, industrial halls)

P400 (400kN)
surfaces on which vehicular traffic of very heavy trucks takes place (food or chemical processing industry plants)

The given classes are defined for ideal load conditions (static). In reality, loads of elements (gratings) are more
complex (dynamic).

Therefore, it is worth considering several important details when selecting a load class:

1. Will the grating be loaded by a pallet (of a specific weight) or a forklift?

2. If it will be loaded, then what will be the type and size

AVAILABLE LOAD CLASSES OF GRATINGS OF CHANNELS

INSTALLED OUTSIDE AS PER PN-EN 1433

A15 (15kN)
surfaces on which pedestrian and bicycle traffic takes place

B125 (125 kN)

side drains of car parking lots, drains of pavements

C250 (250 kN)

surface on which vehicular traffic of light trucks takes place

D400 (400 kN)

road carriageways (including pedestrian walkways), roadsides and parking lots for any type of road vehicles

E600 (600 kN) surfaces for heavy loads, e.g. harbors

and docks

F900 (900 kN) surfaces under extremely heavy loads, e.g. airplanes runways
of wheels of the forklift, and how intense will the traffic be (several, several dozen, several hundred passes a day)?

The above information, along with a summary of the weight of the forklift/pallet, can enable us to select the appropriate
load class.

Therefore, it should be kept in mind that at high frequency (repetitions) of loads (even with loads lighter than the
nominal load), the higher load class should be selected.

INSTALLATION OF SINGLE-PART FLOOR DRAINS

1. A drain pipe must be brought to the proper height 2. Place the drain in the hub of the drain pipe in a way so that
the upper part of the drain is located 1-2 [mm] below the upper layer of the flooring.
2. Fill in the space with concrete.
3. When pouring concrete, do not allow obstruction of the opening clearance of the upper part of the drain. Also
remember to precisely fill places that are difficult to reach with the concrete mass.

INSTALLATION OF TWO-PART FLOOR DRAINS

1. Start the installation by settling the lower part of the drain in the structural layers of the ceiling. The lower part
should be settled in the cavity 15-20 [mm] in a way to ensure appropriate drainage of condensate from the
vertical insulation to the drain.
2. Prepare water-proof insulation for the ceiling and install it using the pressure ring of the lower part. 3. The next
step is setting and levelling of the upper part of the drain on the set offset. The edge of the upper part of the
drain should be located 1-2 [mm] below the floor can be prepared.
3. After stabilising the upper part, you may prepare the remaining.
4. Fill the space with concrete.
5. When pouring concrete, do not allow obstruction of the opening clearance of the upper part of the drain. Also
remember to precisely fill places that are difficult to reach with the concrete mass.

Industrial FLOOR DRAINS vertical with square top,

single-part

W200/110V1 W300/160V1

Drain symbol W200/75V1 W200/110V1 W300/200/110V1 W300/110V1 W300/160V1 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.005075.21 00.005110.21 00.082110.21 00.025110.21 00.001160.21
Complete drain catalogue number mat. 304 with ladder grating 00.005075.32 00.005110.32 00.082110.32
00.025110.32 00.001160.32 Complete drain catalogue number mat. 304 with plate grating 00.005075.41 00.005110.41
00.082110.41 00.025110.41 00.001160.41 Complete drain catalogue number mat. 304 with perforated sheet grating
00.005075.13 00.005110.13 00.082110.13 00.025110.13 00.001160.13 DN 75 110 110 110 160 Dimensions H 192 192
195 244 244 h1 60 60 60 60 90 D 157 157 157 255 255 W 200x200 200x200 300x300 300x300 300x300 hr 30 30 30
30 30 Drain body catalogue number mat. 304 20.005075.07 20.005110.07 20.082110.07 20.025110.07 20.001160.07
Basket catalogue number 02.200110.00 02.200110.00 02.200110.00 08.300160.00 08.300160.00 Sediment basket
catalogue number * 03.200110.00 03.200110.00 03.200110.00 09.300160.00 09.300160.00 Trap catalogue number
00.200110.01 00.200110.01 00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket capacity [ l ] 0.45 0.45
0.45 2.9 2.9 Trap flow rate [ l/s ] 2.1 2.1 2.1 5.7 5.7 anti-slip mesh 06.200164.07 06.200164.07 06.300265.07
06.300265.07 06.300265.07 ladder 09.200164.07 09.200164.07 09.300265.07 09.300265.07 09.300265.07 Gratings
serial numbers plate 17.200164.07 17.200164.07 17.300265.07 17.300265.07 17.300265.07 perforated sheet
01.200165.07 01.200165.07 01.300265.07 01.300265.07 01.300265.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13..

GRATING SYMBOLS

Industrial FLOOR DRAINS vertical with square top,

two-part

Grating Waste basket Gasket Upper part Flange Trap Lower part

W200/110V2 W300/160V2

Drain symbol W200/75V2 W200/110V2 W300/200/110V2 W300/110V2 W300/160V2 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.006075.21 00.006110.21 00.083110.21 00.026110.21 00.002160.21
Complete drain catalogue number mat. 304 with ladder grating 00.006075.32 00.006110.32 00.083110.32
00.026110.32 00.002160.32 Complete drain catalogue number mat. 304 with plate grating 00.006075.41 00.006110.41
00.083110.41 00.026110.41 00.002160.41 Complete drain catalogue number mat. 304 with perforated sheet grating
00.006075.13 00.006110.13 00.083110.13 00.026110.13 00.002160.13 H2 80-135 80-135 80-135 80-155 80-155 DN
75 110 110 110 160 H 200 200 200 172 172 Dimensions h1 60 60 60 60 90 D 193 193 193 295 295 W 200x200
200x200 300x300 300x300 300x300 hr 30 30 30 30 30 Drain body catalogue number mat. 304 upper part
40.006110.07 40.006110.07 40.083110.07 40.026110.07 40.026110.07 Drain body catalogue number mat. 304 lower
part 50.006075.00 50.006110.00 50.006110.00 50.026110.00 50.002160.00 Basket catalogue number 02.200110.00
02.200110.00 02.200110.00 08.300160.00 08.300160.00 Sediment basket catalogue number * 03.200110.00
03.200110.00 03.200110.00 09.300160.00 09.300160.00 Trap catalogue number 00.200110.01 00.200110.01
00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [
l/s ] 2.1 2.1 2.1 5.7 5.7 anti-slip mesh 06.200164.07 06.200164.07 06.300265.07 06.300265.07 06.300265.07 ladder
09.200164.07 09.200164.07 09.300265.07 09.300265.07 09.300265.07 Gratings serial numbers plate 17.200164.07
17.200164.07 17.300265.07 17.300265.07 17.300265.07 perforated sheet 01.200165.07 01.200165.07 01.300265.07
01.300265.07 01.300265.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS
Industrial FLOOR DRAINS horizontal with square top,
single-part

W200/110H1 W300/160H1
Drain symbol W200/75H1 W200/110H1 W300/200/110H1 W300/110H1 W300/160H1 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.007075.21 00.007110.21 00.084110.21 00.027110.21 00.003160.21
Complete drain catalogue number mat. 304 with ladder grating 00.007075.32 00.007110.32 00.084110.32
00.027110.32 00.003160.32 Complete drain catalogue number mat. 304 with plate grating 00.007075.41 00.007110.41
00.084110.41 00.027110.41 00.003160.41 Complete drain catalogue number mat. 304 with perforated sheet grating
00.007075.13 00.007110.13 00.084110.13 00.027110.13 00.003160.13 DN 75 110 110 110 160 H 202 202 227 264
314 h1 60 60 60 60 90 Dimensions D 157 157 157 255 255 W 200x200 200x200 300x300 300x300 300x300 hr 30 30
30 30 30 Drain body catalogue number mat. 304 20.007075.07 20.007110.07 20.084110.07 20.027110.07
20.003160.07 Basket catalogue number 02.200110.00 02.200110.00 02.200110.00 08.300160.00 08.300160.00
Sediment basket catalogue number * 03.200110.00 03.200110.00 03.200110.00 09.300160.00 09.300160.00 Trap
catalogue number 00.200110.01 00.200110.01 00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket
capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [ l/s ] 2.1 2.1 2.1 5.7 5.7 anti-slip mesh 06.200164.07 06.200164.07
06.300265.07 06.300265.07 06.300265.07 ladder 09.200164.07 09.200164.07 09.300265.07 09.300265.07
09.300265.07 Gratings serial numbers plate 17.200164.07 17.200164.07 17.300265.07 17.300265.07 17.300265.07
perforated sheet 01.200165.07 01.200165.07 01.300265.07 01.300265.07 01.300265.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

Industrial FLOOR DRAINS horizontal with square top,

two-part

W200/110H2 W300/160H2

Drain symbol W200/75H2 W200/110H2 W300/200/110H2 W300/110H2 W300/160H2 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.008075.21 00.008110.21 00.085110.21 00.028110.21 00.004160.21
grating Complete drain catalogue number mat. 304 with ladder 00.008075.32 00.008110.32 00.085110.32
00.028110.32 00.004160.32 Complete drain catalogue number mat. 304 with plate grating 00.008075.41 00.008110.41
00.085110.41 00.028110.41 00.004160.41 Complete drain catalogue number mat. 304 with perforated sheet grating
00.008075.13 00.008110.13 00.085110.13 00.028110.13 00.004160.13 H2 80-135 80-135 80-135 80-155 80-155 DN
75 110 110 110 160 H 200 200 200 172 222 Dimensions h1 60 60 60 60 90 D 193 193 193 295 295 W 200x200
200x200 300x300 300x300 300x300 hr 30 30 30 30 30 Drain body catalogue number mat. 304 upper part
06.200164.07 06.200164.07 06.300265.07 06.300265.07 06.300265.07 Drain body catalogue number mat. 304 lower
part 09.200164.07 09.200164.07 09.300265.07 09.300265.07 09.300265.07 Basket catalogue number 17.200164.07
17.200164.07 17.300265.07 17.300265.07 17.300265.07 Sediment basket catalogue number * 01.200165.07
01.200165.07 01.300265.07 01.300265.07 01.300265.07 Trap catalogue number 00.200110.01 00.200110.01
00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [
l/s ] 2.1 2.1 2.1 5.7 5.7 anti-slip mesh 06.200164.07 06.200164.07 06.300265.07 06.300265.07 06.300265.07 ladder
09.200164.07 09.200164.07 09.300265.07 09.300265.07 09.300265.07 Gratings serial numbers plate 17.200164.07
17.200164.07 17.300265.07 17.300265.07 17.300265.07 perforated sheet 01.200165.07 01.200165.07 01.300265.07
01.300265.07 01.300265.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

ACCESSORIES for industrial vertical and horizontal

floor drains, with square top, single- and two-part

 Breweries Manufacture of beverages Dairies Meat factories Bakeries Public Facilities Pumping stations

Industrial FLOOR DRAINS vertical with square top,

single-part

W250/110V1 W400/200V1

Drain symbol W250/110V1 W400/200V1 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.001110.21 00.001200.21 Complete drain catalogue number mat. 304 with ladder grating 00.001110.32
00.001200.32 Complete drain catalogue number mat. 304 with plate grating 00.001110.41 00.001200.41 Complete
drain catalogue number mat. 304 with perforated sheet grating 00.001110.13 00.001200.13 DN 110 200 H 234 334 h1
60 90 Dimensions D 193 348 W 250x250 400x400 hr 30 30 Drain body catalogue number mat. 304 20.001110.07
20.001200.07 Basket catalogue number 04.250110.00 10.400200.00 Sediment basket catalogue number *
05.250110.00 11.400200.00 Trap catalogue number 00.250110.02 00.400200.02 Basket / sediment basket capacity [ l ]
1 8.7 Trap flow rate [ l/s ] 3 13.9 anti-slip mesh 06.250213.07 06.400365.07 ladder 09.250213.07 09.400365.07
Gratings serial numbers plate 17.250213.07 17.400365.07 perforated sheet 01.250213.07 01.400365.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
  to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

Industrial FLOOR DRAINS vertical with square top, two-part

W250/110V2 W400/200V2

Drain symbol W250/110V2 W400/200V2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.002110.21 00.002200.21 Complete drain catalogue number mat. 304 with ladder grating 00.002110.32
00.002200.32 Complete drain catalogue number mat. 304 with plate grating 00.002110.41 00.002200.41 Complete
drain catalogue number mat. 304 with perforated sheet grating 00.002110.13 00.002200.13 H2 80-155 75-140 DN 110
200 H 200 210 Dimensions h1 60 90 D 193 348 W 250x250 400x400 hr 30 30 Drain body catalogue number mat. 304
upper part 40.002110.07 40.002200.07 Drain body catalogue number mat. 304 lower part 50.006110.00 50.002200.00
Basket catalogue number 06.250110.00 12.400200.00 Sediment basket catalogue number * 07.250110.00
13.400200.00 Trap catalogue number 00.250110.02 00.400200.02 Basket / sediment basket capacity [ l ] 1 5.4 Trap
flow rate [ l/s ] 3 13.9 anti-slip mesh 06.250213.07 06.400365.07 Trap flow rate [ l/s ] ladder 09.250213.07
09.400365.07 plate 17.250213.07 17.400365.07 perforated sheet 01.250213.07 01.400365.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

Industrial FLOOR DRAINS horizontal with square top, single-part

W250/110H1 W400/200H1
Drain symbol W250/110H1 W400/200H1 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.003110.21 00.003200.21 Complete drain catalogue number mat. 304 with ladder grating 00.003110.32
00.003200.32 Complete drain catalogue number mat. 304 with plate grating 00.003110.41 00.003200.41 Complete
drain catalogue number mat. 304 with perforated sheet grating 00.003110.13 00.003200.13 DN 110 200 H 246 354 h1
60 90 Dimensions D 193 348 W 250x250 400x400 hr 30 30 Drain body catalogue number mat. 304 20.003110.07
20.003200.07 Basket catalogue number 04.250110.00 14.400200.00 Sediment basket catalogue number *
05.250110.00 15.400200.00 Trap catalogue number 00.250110.03 00.400200.03 Basket / sediment basket capacity [ l ]
1 2.7 Trap flow rate [ l/s ] 2.1 9.2 anti-slip mesh 06.250213.07 06.400365.07 ladder 09.250213.07 09.400365.07
Gratings serial numbers plate 17.250213.07 17.400365.07 perforated sheet 01.250213.07 01.400365.07
  to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

Industrial FLOOR DRAINS horizontal with square top, two-part

W250/110H2 W400/200H2

Drain symbol W250/110H2 W400/200H2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.004110.21 00.004200.21 Complete drain catalogue number mat. 304 with ladder grating 00.004110.32
00.004200.32 Complete drain catalogue number mat. 304 with plate grating 00.004110.41 00.004200.41
Complete drain catalogue number mat. 304 with perforated sheet grating 00.004110.13 00.004200.13 Dimensions
H2 95-155 75-140 DN 110 200 H 200 320 h1 60 90 D 193 348 W 250x250 400x400 hr 30 30 Drain body catalogue
number mat. 304 upper part 40.002110.07 40.002200.07 Drain body catalogue number mat. 304 lower part
50.008110.00 50.004200.00 Basket catalogue number 06.250110.00 12.400200.00 Sediment basket catalogue
number * 07.250110.00 13.400200.00 Trap catalogue number 00.250110.03 00.400200.03 Basket / sediment
basket capacity [ l ] 1 5.4 Trap flow rate [ l/s ] 2.1 9.2 Gratings serial numbers anti-slip mesh 06.250213.07
06.400365.07 ladder 09.250213.07 09.400365.07 plate 17.250213.07 17.400365.07 perforated sheet 01.250213.07
01.400365.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

ACCESSORIES for industrial vertical and horizontal floor drains, with

square top, single- and two-part

Pharmacy Chemical plants Treatment plants Public space Industrial kitchens Hospitals Hotels Warehouses

Industrial FLOOR DRAINS vertical with round top, single-part

D200/110V1 D300/160V1

Drain symbol D200/75V1 D200/110V1 D300/200/110V1 D300/110V1 D300/160V1 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.015075.23 00.015110.23 00.076110.23 00.072110.23 00.072160.23
Complete drain catalogue number mat. 304 with ladder grating 00.015075.34 00.015110.34 00.076110.34
00.072110.34 00.072160.34 Complete drain catalogue number mat. 304 with plate grating 00.015075.43
00.015110.43 00.076110.43 00.072110.43 00.072160.43 Complete drain catalogue number mat. 304 with tight
plate 00.015075.50 00.015110.50 00.076110.50 00.072110.50 00.072160.50 Dimensions DN 75 110 110 110 160 H
189 189 189 240 240 h1 60 60 60 60 90 D 157 157 157 255 255 Ø 198 198 300 300 300 hr 25 25 25 25 25 Drain
body catalogue number mat. 304 20.015075.06 20.015110.06 20.076110.06 20.072110.06 20.072160.06 Basket
catalogue number 02.200110.00 02.200110.00 02.200110.00 08.300160.00 08.300160.00 Sediment basket
catalogue number * 03.200110.00 03.200110.00 03.200110.00 09.300160.00 09.300160.00 Trap catalogue number
00.200110.01 00.200110.01 00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket capacity [ l ] 0.45
0.45 0.45 2.9 2.9 Trap flow rate [ l/s ] 2.1 2.1 2.1 5.7 5.7 Gratings serial numbers anti-slip mesh 06.200188.06
06.200188.06 06.300290.06 06.300290.06 06.300290.06 ladder 09.200188.06 09.200188.06 09.300290.06
09.300290.06 09.300290.06 plate 17.200188.06 17.200188.06 17.300290.06 17.300290.06 17.300290.06 tight plate
16.200188.06 16.200188.06 16.300290.06 16.300290.06 16.300290.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

seal is used.

In case of floor drains with a tight plate cover, an 8 [mm] thick grating with a circumference

GRATING SYMBOLS

plate anti-slip mesh ladder

tight plate

Industrial FLOOR DRAINS vertical with round top, two-part

D200/110V2 D300/160V2

Drain symbol D200/75V2 D200/110V2 D300/200/110V2 D300/110V2 D300/160V2 Complete drain catalogue number
mat. 304 with anti-slip mesh grating 00.016075.23 00.016110.23 00.077110.23 00.073110.23 00.073160.23 Complete
drain catalogue number mat. 304 with ladder grating 00.016075.34 00.016110.34 00.077110.34 00.073110.34
00.073160.34 Complete drain catalogue number mat. 304 with plate grating 00.016075.43 00.016110.43 00.077110.43
00.073110.43 00.073160.43 Complete drain catalogue number mat. 304 with tight plate 00.016075.50 00.016110.50
00.077110.50 00.073110.50 00.073160.50 h2 75-135 75-135 75-130 75-145 75-145 DN 75 110 110 110 160 H 200
200 200 172 172 Dimensions h1 60 60 60 60 90 D 193 193 193 295 295 Ø 198 198 300 300 300 hr 25 25 25 25 25
Drain body catalogue number mat. 304 upper part 40.016110.06 40.016110.06 40.077110.06 40.073110.06
40.073110.06 Drain body catalogue number mat. 304 lower part 50.006075.00 50.006110.00 50.006110.00
50.026110.00 50.002160.00 Basket catalogue number 02.200110.00 02.200110.00 02.200110.00 08.300160.00
08.300160.00 Sediment basket catalogue number * 03.200110.00 03.200110.00 03.200110.00 09.300160.00
09.300160.00 Trap catalogue number 00.200110.01 00.200110.01 00.200110.01 00.300160.01 00.300160.01 Basket /
sediment basket capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [ l/s ] 2.1 2.1 2.1 5.7 5.7 anti-slip mesh
06.200188.06 06.200188.06 06.300290.06 06.300290.06 06.300290.06 Gratings serial numbers ladder 09.200188.06
09.200188.06 09.300290.06 09.300290.06 09.300290.06 plate 17.200188.06 17.200188.06 17.300290.06 17.300290.06
17.300290.06 tight plate 16.200188.06 16.200188.06 16.300290.06 16.300290.06 16.300290.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

In case of floor drains with a tight plate cover, an 8 [mm] thick grating with a circumference

GRATING SYMBOLS

seal is used.

tight plate

Industrial FLOOR DRAINS horizontal with round top, single-part

D200/110H1 D300/160H1

Drain symbol D200/75H1 D200/110H1 D300/200/110H1 D300/110H1 D300/160H1 Complete drain catalogue number
mat. 304 with anti-slip mesh grating 00.017075.23 00.017110.23 00.078110.23 00.074110.23 00.074160.23 Complete
drain catalogue number mat. 304 with ladder grating 00.017075.34 00.017110.34 00.078110.34 00.074110.34
00.074160.34 Complete drain catalogue number mat. 304 with plate grating 00.017075.43 00.017110.43 00.078110.43
00.074110.43 00.074160.43 Complete drain catalogue number mat. 304 with tight plate 00.017075.50 00.017110.50
00.078110.50 00.074110.50 00.074160.50 DN 75 110 110 110 160 H 186 221 221 260 310 h1 60 60 60 60 90
Dimensions D 157 157 157 255 255 Ø 198 198 300 300 300 hr 25 25 25 25 25 Drain body catalogue number mat. 304
20.017075.06 20.017110.06 20.078110.06 20.074110.06 20.074160.06 Basket catalogue number 02.200110.00
02.200110.00 02.200110.00 08.300160.00 08.300160.00 Sediment basket catalogue number * 03.200110.00
03.200110.00 03.200110.00 09.300160.00 09.300160.00 Trap catalogue number 00.200110.01 00.200110.01
00.200110.01 00.300160.01 00.300160.01 Basket / sediment basket capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [
l/s ] 2.1 2.1 2.1 5.7 5.7 Gratings serial numbers anti-slip mesh 06.200188.06 06.200188.06 06.300290.06 06.300290.06
06.300290.06 ladder 09.200188.06 09.200188.06 09.300290.06 09.300290.06 09.300290.06 plate 17.200188.06
17.200188.06 17.300290.06 17.300290.06 17.300290.06 tight plate 16.200188.06 16.200188.06 16.300290.06
16.300290.06 16.300290.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set. In case of floor drains with a tight plate cover, an 8 [mm] thick grating with a circumference seal is
used. plate anti-slip mesh ladder GRATING SYMBOLS tight plate

Industrial FLOOR DRAINS horizontal with round top, two-part

D200/110H2 D300/160H2

Drain symbol D200/75H2 D200/110H2 D300/200/110H2 D300/110H2 D300/160H2 Complete drain catalogue number
mat. 304 with anti-slip mesh grating 00.018075.23 00.018110.23 00.079110.23 00.075110.23 00.075160.23 Complete
drain catalogue number mat. 304 with ladder grating 00.018075.34 00.018110.34 00.079110.34 00.075110.34
00.075160.34 Complete drain catalogue number mat. 304 with plate grating 00.018075.43 00.018110.43 00.079110.43
00.075110.43 00.075160.43 Complete drain catalogue number mat. 304 with tight plate 00.018075.50 00.018110.50
00.079110.50 00.075110.50 00.075160.50 h2 75-135 75-135 75-130 75-145 75-145 DN 75 110 110 110 160 H 200
200 200 172 222 Dimensions h1 60 60 60 60 90 D 157 157 157 295 295 Ø 198 198 300 300 300 hr 25 25 25 25 25
Drain body catalogue number mat. 304 upper part 40.016110.06 40.016110.06 40.077110.06 40.073110.06
40.073110.06 Drain body catalogue number mat. 304 lower part 50.008075.00 50.008110.00 50.008110.00
50.028110.00 50.004160.00 Basket catalogue number 02.200110.00 02.200110.00 02.200110.00 08.300160.00
08.300160.00 Sediment basket catalogue number * 03.200110.00 03.200110.00 03.200110.00 09.300160.00
09.300160.00 Trap catalogue number 00.200110.01 00.200110.01 00.200110.01 00.300160.01 00.300160.01 Basket /
sediment basket capacity [ l ] 0.45 0.45 0.45 2.9 2.9 Trap flow rate [ l/s ] 2.1 2.1 2.1 5.7 5.7 Gratings serial numbers
anti-slip mesh 06.200188.06 06.200188.06 06.300290.06 06.300290.06 06.300290.06 ladder 09.200188.06
09.200188.06 09.300290.06 09.300290.06 09.300290.06 plate 17.200188.06 17.200188.06 17.300290.06 17.300290.06
17.300290.06 tight plate 16.200188.06 16.200188.06 16.300290.06 16.300290.06 16.300290.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.
In case of floor drains with a tight plate cover, an 8 [mm] thick grating with a circumference

GRATING SYMBOLS

plate anti-slip mesh ladder

seal is used.

tight plate

ACCESSORIES for industrial vertical and horizontal floor drains, with

round top, single- and two-part

Do you have questions about the products or services?

Check www.attinox.com and contact with us. Our experts will help you.

Industrial FLOOR DRAINS vertical with round top, single- and two-part

D260/110V1 D260/110V2

Drain symbol D260/110V1 D260/110V2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.009110.23 00.010110.23 Complete drain catalogue number mat. 304 with ladder grating 00.009110.34
00.010110.34 Complete drain catalogue number mat. 304 with plate grating 00.009110.43 00.010110.43 Complete
drain catalogue number mat. 304 with tight plate 00.009110.50 00.010110.50 h2 – 75-150 DN 110 110 H 228 200
Dimensions h1 60 60 D 193 193 Ø 260 260 hr 25 25 Drain body catalogue number mat. 304 upper part 20.009110.06
20.010110.06 Drain body catalogue number mat. 304 lower part – 50.006110.00 Basket catalogue number
04.250110.00 06.250110.00 Sediment basket catalogue number * 05.250110.00 07.250110.00 Trap catalogue number
00.250110.02 00.250110.02 Basket / sediment basket capacity [ l ] 1 1 Trap flow rate [ l/s ] 3 3 anti-slip mesh
06.250250.06 06.250250.06 ladder 09.250250.06 09.250250.06 Gratings serial numbers plate 17.250250.06
17.250250.06 tight plate 16.250250.06 16.250250.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
 number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

In case of floor drains with a tight plate cover, an 8 [mm] thick plate grating with a circumference seal is used.

GRATING SYMBOLS

plate anti-slip mesh ladder

tight plate

Industrial FLOOR DRAINS horizontal with round top, single- and two-
part

D260/110H1 D260/110H2

Drain symbol D260/110H1 D260/110H2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.011110.23 00.012110.23 Complete drain catalogue number mat. 304 with ladder grating 00.011110.34
00.012110.34 Complete drain catalogue number mat. 304 with plate grating 00.011110.43 00.012110.43 Complete
drain catalogue number mat. 304 with tight plate 00.011110.50 00.012110.50 h2 – 100-145 DN 110 110 H 223 200
Dimensions h1 60 60 D 193 193 Ø 260 260 hr 25 25 Drain body catalogue number mat. 304 upper part 20.011110.06
20.010110.06 Drain body catalogue number mat. 304 lower part – 50.008110.00 Basket catalogue number
04.250110.00 06.250110.00 Sediment basket catalogue number * 05.250110.00 07.250110.00 Trap catalogue number
00.250110.03 00.250110.03 Basket / sediment basket capacity [ l ] 1 1 Trap flow rate [ l/s ] 2.1 2.1 anti-slip mesh
06.250250.06 06.250250.06 ladder 09.250250.06 09.250250.06 Gratings serial numbers plate 17.250250.06
17.250250.06 tight plate 16.250250.06 16.250250.06

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13 * to order a complete drain made of 316 material, change the first digit of the catalogue
number to "1", e.g. 10.005075.13, with a sand sediment basket, change the second digit to "3", e.g.
13.005075.13.

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

In case of floor drains with a tight plate cover, an 8 [mm] thick plate grating with a circumference seal is used.

GRATING SYMBOLS
plate anti-slip mesh ladder

tight plate

ACCESSORIES for industrial vertical and horizontal drains, with round top, single-part and two-
part

D260/110V1, D260/110V2, D260/110H1, D260/110H2

BASKET

SEDIMENT BASKET

Industrial FLOOR DRAINS anti-odour, vertical with square top, single-part and two-part

WA200/110V1 WA200/110V2

Drain symbol Wa200/110V1 Wa200/110V2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.021110.21 00.022110.21 Complete drain catalogue number mat. 304 with ladder grating 00.021110.32
00.022110.32 Complete drain catalogue number mat. 304 with plate grating 00.021110.41 00.022110.41 Complete
drain catalogue number mat. 304 with perforated sheet grating 00.021110.13 00.022110.13 H2 – 120-175 DN 110 110
H 245 200 Dimensions h1 60 60 D 157 193 W 200x200 200x200 hr 25 25 Drain body catalogue number mat. 304
upper part 20.021110.07 40.022110.07 Drain body catalogue number mat. 304 lower part – 50.006110.00 Anti-odour
element 00.200110.08 00.200110.08 Basket catalogue number 02.200110.00 02.200110.00 Sediment basket catalogue
number * 03.200110.00 03.200110.00 Trap catalogue number 00.200110.01 00.200110.01 Basket / sediment basket
capacity [ l ] 0.45 0.45 Trap flow rate [ l/s ] 2.1 2.1 anti-slip mesh 06.200164.07 06.200164.07 ladder 09.200164.07
09.200164.07 Gratings serial numbers plate 17.200164.07 17.200164.07 perforated sheet 01.200165.07 01.200165.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS
perforated sheetanti-slip mesh ladder plate

Industrial FLOOR DRAINS anti-odour, horizontal with square top, single- part and two-part

WA200/110H1 WA200/110H2

Drain symbol Wa200/110H1 Wa200/110H2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
00.023110.21 00.024110.21 Complete drain catalogue number mat. 304 with ladder grating 00.023110.32
00.024110.32 Complete drain catalogue number mat. 304 with plate grating 00.023110.41 00.024110.41 Complete
drain catalogue number mat. 304 with perforated sheet grating 00.023110.13 00.024110.13 H2 – 120-175 DN 110 110
H 274 212 Dimensions h1 60 60 D 157 193 W 200x200 200x200 hr 30 30 Drain body catalogue number mat. 304
upper part 20.023110.07 40.024110.07 Drain body catalogue number mat. 304 lower part – 50.008110.00 Anti-odour
element 00.200110.08 00.200110.08 Basket catalogue number 02.200110.00 02.200110.00 Sediment basket catalogue
number * 03.200110.00 03.200110.00 Trap catalogue number 00.200110.01 00.200110.01 Basket / sediment basket
capacity [ l ] 0.45 0.45 Trap flow rate [ l/s ] 2.1 2.1 anti-slip mesh 06.200164.07 06.200164.07 ladder 09.200164.07
09.200164.07 Gratings serial numbers plate 17.200164.07 17.200164.07 perforated sheet 01.200165.07 01.200165.07

 to order a complete drain with a sand sediment basket, change the second digit of the catalogue number to "1",
e.g. 01.005075.13
 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.005075.13, with a sand sediment basket, change the second digit to "3", e.g. 13.005075.13.

GRATING SYMBOLS

perforated sheetanti-slip mesh ladder plate

Mini FLOOR DRAINS vertical with square top, single-

part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wmk150/50V1 Wmk150/75V1 Wmk150/110V1 Complete drain catalogue number mat. 304 with
perforated sheet grating 08.056050.70 08.056075.70 08.056110.70 DN 50 75 110 H 132 132 120 h1 60 60 –
Dimensions D 110 110 110 W 150x150 150x150 150x150 hr 2 2 2 Drain body catalogue number mat. 304
28.056050.01 28.056075.01 28.056110.01 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated sheet 01.150135.01 01.150135.01 01.150135.01

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED SHEET GRATING IS AVAILABLE FOR WMK150 DRAINS

Mini FLOOR DRAINS vertical with square top, two-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wmk150/50V2 Wmk150/75V2 Wmk150/110V2 Complete drain catalogue number mat. 304 with
perforated sheet grating 08.057050.70 08.057075.70 08.057110.70 H2 50-105 50-105 50-105 DN 50 75 110 H 130 130
130 Dimensions h1 60 60 60 D 137 137 137 W 150x150 150x150 150x150 hr 2 2 2 Drain body catalogue number mat.
304 upper part 28.056110.01 28.056110.01 28.056110.01 Drain body catalogue number mat. 304 lower part
50.057050.00 50.057075.00 50.057110.00 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated sheet 01.150135.01 01.150135.01 01.150135.01

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED SHEET GRATING IS AVAILABLE FOR WMK150 FLOOR DRAINS

Mini FLOOR DRAINS horizontal with square top,

single-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wmk150/50H1 Wmk150/75H1 Wmk150/110H1 Complete drain catalogue number mat. 304 with
perforated sheet grating 08.058050.70 08.058075.70 08.058110.70 DN 50 75 110 H 132 132 165 h1 60 60 60
Dimensions D 110 110 110 W 150x150 150x150 150x150 hr 2 2 2 Drain body catalogue number mat. 304
28.058050.01 28.058075.01 28.058110.01 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated sheet 01.150135.01 01.150135.01 01.150135.01

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED SHEET GRATING IS AVAILABLE FOR WMK150 FLOOR DRAINS

Mini FLOOR DRAINS horizontal with square top, two-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wmk150/50H2 Wmk150/75H2 Wmk150/110H2 Complete drain catalogue number mat. 304 with
perforated sheet grating 08.059050.70 08.059050.70 08.059050.70 H2 50-105 50-105 50-105 DN 50 75 110 H 135 135
135 Dimensions h1 60 60 60 D 137 137 137 W 150x150 150x150 150x150 hr 2 2 2 Drain body catalogue number mat.
304 upper part 28.056110.01 28.056110.01 28.056110.01 Drain body catalogue number mat. 304 lower part
50.059050.00 50.059075.00 50.059110.00 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated sheet 01.150135.01 01.150135.01 01.150135.01

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED SHEET GRATING IS AVAILABLE FOR WMK150 FLOOR DRAINS

Mini FLOOR DRAINS vertical with square top, single-

part

Grating Strainer Gasket Trap Body

WITH DN 50 OUTLET
WITH DN 110 OUTLET

Drain symbol Wm150/50V1 Wm150/75V1 Wm150/110V1 Complete drain catalogue number mat. 304 with perforated
plate grating 08.032050.60 08.032075.60 08.032110.60 DN 50 75 110 H 137 137 125 h1 60 60 – Dimensions D 110
110 110 W 150x150 150x150 150x150 hr 10 10 10 Drain body catalogue number mat. 304 28.032050.04 28.032075.04
28.032110.04 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number
01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no. perforated plate
20.150141.04 20.150141.04 20.150141.04

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED PLATE GRATING IS AVAILABLE FOR WM150 FLOOR DRAINS

Mini FLOOR DRAINS vertical with square top, two-

part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wm150/50V2 Wm150/75V2 Wm150/110V2 Complete drain catalogue number mat. 304 with perforated
plate grating 08.033050.60 08.033075.60 08.033110.60 H2 60-110 60-110 60-110 DN 50 75 110 H 130 130 130
Dimensions h1 60 60 60 D 137 137 137 W 150x150 150x150 150x150 hr 10 10 10 Drain body catalogue number mat.
304 upper part 28.032110.04 28.032110.04 28.032110.04 Drain body catalogue number mat. 304 lower part
50.057050.00 50.057075.00 50.057110.00 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated plate 20.150141.04 20.150141.04 20.150141.04

 to order a complete drain with a sand sediment basket, change the first digit of the catalogue number to "1", e.g.
10.005075.13

PERFORATED PLATE GRATING IS AVAILABLE FOR WM150 FLOOR DRAINS

Mini FLOOR DRAINS horizontal with square top, single-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wm150/50H1 Wm150/75H1 Wm150/110H1 Complete drain catalogue number mat. 304 with perforated
plate grating 08.042050.60 08.042075.60 08.042110.60 DN 50 75 110 H 137 137 170 Dimensions h1 60 60 60 D 110
110 110 W 150x150 150x150 150x150 hr 10 10 10 Drain body catalogue number mat. 304 28.042050.01 28.042075.01
28.042110.01 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number
01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no. perforated plate
20.150141.04 20.150141.04 20.150141.04

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED PLATE GRATING IS AVAILABLE FOR WM150 FLOOR DRAINS

Mini FLOOR DRAINS horizontal with square top, two-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wm150/50H2 Wm150/75H2 Wm150/110H2 Complete drain catalogue number mat. 304 with perforated
plate grating 08.043050.60 08.043075.60 08.043110.60 H2 60-110 60-110 60-110 DN 50 75 110 H 135 135 135
Dimensions h1 60 60 60 D 137 137 137 W 150x150 150x150 150x150 hr 10 10 10 Drain body catalogue number mat.
304 upper part 28.032110.04 28.032110.04 28.032110.04 Drain body catalogue number mat. 304 lower part
50.059050.00 50.059075.00 50.059110.00 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 Grating catalogue no.
perforated plate 20.150141.04 20.150141.04 20.150141.04

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

PERFORATED PLATE GRATING IS AVAILABLE FOR WM150 FLOOR DRAINS

Mini FLOOR DRAINS vertical with square top, single-

part
WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wm200/50V1 Wm200/75V1 Wm200/110V1 Complete drain catalogue number mat. 304 with anti-slip
mesh grating 00.030050.20 00.030075.20 00.030110.20 Complete drain catalogue number mat. 304 with ladder grating
00.030050.31 00.030075.31 00.030110.31 Complete drain catalogue number mat. 304 with plate grating 00.030050.40
00.030075.40 00.030110.40 Complete drain catalogue number mat. 304 with perforated sheet grating 00.030050.12
00.030075.12 00.030110.12 DN 50 75 110 H 149 149 137 h1 60 60 – Dimensions D 110 110 110 W 200x200 200x200
200x200 hr 20 20 20 Drain body catalogue number mat. 304 20.030050.05 20.030075.05 20.030110.05 Trap catalogue
number 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number 01.150110.00 01.150110.00
01.150110.00 Trap flow rate [l/s] 0.9 0.9 0.9 mesh 06.200164.05 06.200164.05 06.200164.05 ladder 09.200164.05
09.200164.05 09.200164.05 Grating catalogue no. plate 10.200164.05 10.200164.05 10.200164.05 perforated sheet
01.200165.05 01.200165.05 01.200165.05

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

anti-slip mesh ladder plate perforated sheet

Mini FLOOR DRAINS vertical with square top, two-

part

WITH DN 110 OUTLET Drain symbol Wm200/50V2 Wm200/75V2 Wm200/110V2 Complete drain catalogue
number mat. 304 with anti-slip mesh grating 00.031050.20 00.031075.20 00.031110.20 Complete drain catalogue
number mat. 304 with ladder grating 00.031050.31 00.031075.31 00.031110.31 Complete drain catalogue number
mat. 304 with plate grating 00.031050.40 00.031075.40 00.031110.40 Complete drain catalogue number mat. 304
with perforated sheet grating 00.031050.12 00.031075.12 00.031110.12 Dimensions H2 70-120 70-120 70-120 DN
50 75 110 H 130 130 130 h1 60 60 60 D 137 137 137 W 200x200 200x200 200x200 hr 20 20 20 Drain body
catalogue number mat. 304 upper part 20.030110.05 20.030110.05 20.030110.05 Drain body catalogue number
mat. 304 lower part 50.057050.00 50.057075.00 50.057110.00 Trap catalogue number 00.150110.01 00.150110.01
00.150110.01 Strainer catalogue number 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9
Grating catalogue no. anti-slip mesh 06.200164.05 06.200164.05 06.200164.05 ladder 09.200164.05 09.200164.05
09.200164.05 plate 10.200164.05 10.200164.05 10.200164.05 perforated sheet 01.200165.05 01.200165.05
01.200165.05
  to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

anti-slip mesh ladder plate perforated sheet

Mini FLOOR DRAINS horizontal with square top,

single-part

WITH DN 110 OUTLET

Drain symbol Wm200/50H1 Wm200/75H1 Wm200/110H1 Complete drain catalogue number mat. 304 with anti-slip
mesh grating 00.040050.20 00.040075.20 00.040110.20 Complete drain catalogue number mat. 304 with ladder grating
00.040050.31 00.040075.31 00.040110.31 Complete drain catalogue number mat. 304 with plate grating 00.040050.40
00.040075.40 00.040110.40 Complete drain catalogue number mat. 304 perforated sheet grating 00.040050.12
00.040075.12 00.040110.12 DN 50 75 110 H 149 149 182 h1 60 60 60 Dimensions D 110 110 110 W 200x200
200x200 200x200 hr 20 20 20 Drain body catalogue number mat. 304 20.040050.05 20.040075.05 20.040110.05 Trap
catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number 01.150110.00 01.150110.00
01.150110.00 Trap flow rate [l/s] 0.9 0.9 0.9 anti-slip mesh 06.200164.05 06.200164.05 06.200164.05 ladder
09.200164.05 09.200164.05 09.200164.05 Grating catalogue no. plate 10.200164.05 10.200164.05 10.200164.05
perforated sheet 01.200165.05 01.200165.05 01.200165.05

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

anti-slip mesh ladder plate perforated sheet

ATT STAINLESS STEEL ENGINEERING

Mini FLOOR DRAINS horizontal with square top, two-

part
WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Wm200/50H2 Wm200/75H2 Wm200/110H2 Complete drain catalogue number mat. 304 with anti-slip
mesh grating 00.041050.20 00.041075.20 00.041110.20 Complete drain catalogue number mat. 304 with ladder grating
00.041050.31 00.041075.31 00.041110.31 Complete drain catalogue number mat. 304 with plate grating 00.041050.40
00.041075.40 00.041110.40 Complete drain catalogue number mat. 304 with perforated sheet grating 00.041050.12
00.041075.12 00.041110.12 H2 70-120 70-120 70-120 DN 50 75 110 H 135 135 135 Dimensions h1 60 60 60 D 137
137 137 W 200x200 200x200 200x200 hr 20 20 20 Drain body catalogue number mat. 304 upper part 20.030110.05
20.030110.05 20.030110.05 Drain body catalogue number mat. 304 lower part 50.059050.00 50.059075.00
50.059110.00 Trap catalogue number 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number
01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 anti-slip mesh 06.200164.05 06.200164.05
06.200164.05 ladder 09.200164.05 09.200164.05 09.200164.05 Grating catalogue no. plate 10.200164.05
10.200164.05 10.200164.05 perforated sheet 01.200165.05 01.200165.05 01.200165.05

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

ATT STAINLESS STEEL ENGINEERING

Mini FLOOR DRAINS vertical with round top, single-

part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Dm160/50V1 Dm200/50V1 Dm160/75V1 Dm200/75V1 Dm160/110V1 Dm200/110V1 Complete drain
catalogue number mat. 304 with anti-slip mesh grating 08.036050.23 08.034050.23 08.036075.23 08.034075.23
08.036110.23 08.034110.23 Complete drain catalogue number mat. 304 with ladder grating 08.036050.34
08.034050.34 08.036075.34 08.034075.34 08.036110.34 08.034110.34 Complete drain catalogue number mat. 304
with plate grating 08.036050.43 08.034050.43 08.036075.43 08.034075.43 08.036110.43 08.034110.43 Complete drain
catalogue number mat. 304 with tight plate grating 08.036050.50 08.034050.50 08.036075.50 08.034075.50
08.036110.50 08.034110.50 DN 50 50 75 75 110 110 H 156 156 156 156 144 144 h1 60 60 60 60 – – Dimensions D
110 110 110 110 110 110 Ø 162 198 162 198 162 198 hr 25 25 25 25 25 25 Drain body catalogue number mat. 304
28.036050.06 28.034050.06 28.036075.06 28.034075.06 28.036110.06 28.034110.06 Trap catalogue number
00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number
01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9
0.9 0.9 0.9 anti-slip mesh 06.160152.06 06.200188.06 06.160152.06 06.200188.06 06.160152.06 06.200188.06 ladder
09.160152.06 09.200188.06 09.160152.06 09.200188.06 09.160152.06 09.200188.06 Grating catalogue no. plate
17.160152.06 17.200188.06 17.160152.06 17.200188.06 17.160152.06 17.200188.06 tight plate 16.160152.06
16.200188.06 16.160152.06 16.200188.06 16.160152.06 16.200188.06

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

In case of floor drains with a tight plate cover, an 8 [mm] thick plate grating with a circumference seal is used.

ATT STAINLESS STEEL ENGINEERING

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

Mini FLOOR DRAINS vertical with round top, single-part

Dms160/110V1 Complete drain catalogue number mat. 304 with perforated plate grating 08.038110.57 DN 110 H 124
h1 – D 110 Ø 160 hr 5 28.038110.02 00.150110.01 01.150110.00 0.9 plate 20.160152.02

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOL

For Dms160/110V1 floor drain only perforated plate (P) grating is available.

Mini FLOOR DRAINS vertical with round top, two-

part
WITH DN 50 OUTLET

WITH DN 50 OUTLET WITH DN 110 OUTLET Drain symbol Dm160/50V2 Dm200/50V2 Dm160/75V2
Dm200/75V2 Dm160/110V2 Dm200/110V2 Complete drain catalogue number mat. 304 with anti-slip mesh grating
08.037050.43 08.035050.43 08.037075.43 08.035075.43 08.037110.43 08.035110.43 Complete drain catalogue
number mat. 304 with ladder grating 08.037050.50 08.035050.50 08.037075.50 08.035075.50 08.037110.50
08.035110.50 Complete drain catalogue number mat. 304 with plate grating 00.037050.43 00.035050.43 00.037075.43
00.035075.43 00.037110.43 00.035110.43 Complete drain catalogue number mat. 304 with tight plate grating
00.037050.50 00.035050.50 00.037075.50 00.035075.50 00.037110.50 00.035110.50 H2 75-125 75-125 75-125 75-
125 75-125 75-125 DN 50 50 75 75 110 110 H 130 130 130 130 130 130 Dimensions h1 60 60 60 60 60 60 D 137 137
137 137 137 137 Ø 162 198 162 198 162 198 hr 25 25 25 25 25 25 Drain body catalogue number mat. 304 upper part
28.036110.06 28.034110.06 28.036110.06 28.034110.06 28.036110.06 28.034110.06 Drain body catalogue number
mat. 304 lower part 50.057050.00 50.057050.00 50.057075.00 50.057075.00 50.057110.00 50.057110.00 Trap
catalogue number 00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 Strainer
catalogue number 01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 Trap flow rate
[ l/s ] 0.9 0.9 0.9 0.9 0.9 0.9 anti-slip mesh 06.160152.06 06.200188.06 06.160152.06 06.200188.06 06.160152.06
06.200188.06 ladder 09.160152.06 09.200188.06 09.160152.06 09.200188.06 09.160152.06 09.200188.06 Grating
catalogue no. plate 17.160152.06 17.200188.06 17.160152.06 17.200188.06 17.160152.06 17.200188.06 tight plate
16.160152.06 16.200188.06 16.160152.06 16.200188.06 16.160152.06 16.200188.06

Drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not available
in the drain set.

 to order a complete drain with a sand sediment basket, change the first digit of the catalogue number to "1", e.g.
10.005075.13

GRATING SYMBOLS

In case of floor drains with a tight plate cover, an 8 [mm] thick plate grating with a circumference seal is used.

ATT STAINLESS STEEL ENGINEERING

55

Mini FLOOR DRAINS horizontal with round top,

single-part

WITH DN 50 OUTLET WITH DN 110 OUTLET

Drain symbol Dm160/50H1 Dm200/50H1 Dm160/75H1 Dm200/75H1 Dm160/110H1 Dm200/110H1 Complete drain
catalogue number mat. 304 with anti-slip mesh grating 08.046050.23 08.044050.23 08.046075.23 08.044075.23
08.046110.23 08.044110.23 Complete drain catalogue number mat. 304 with ladder grating 08.046050.34
08.044050.34 08.046075.34 08.044075.34 08.046110.34 08.044110.34 Complete drain catalogue number mat. 304
with plate grating 08.046050.43 08.044050.43 08.046075.43 08.044075.43 08.046110.43 08.044110.43 Complete drain
catalogue number mat. 304 with tight plate grating 08.046050.50 08.044050.50 08.046075.50 08.044075.50
08.046110.50 08.044110.50 DN 50 50 75 75 110 110 H 156 156 156 156 189 189 h1 60 60 60 60 60 60 Dimensions D
110 110 110 110 110 110 Ø 162 198 162 198 162 198 hr 25 25 25 25 25 25 Drain body catalogue number mat. 304
28.046050.06 28.044050.06 28.046075.06 28.044075.06 28.046110.06 28.044110.06 Trap catalogue number
00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number
01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9
0.9 0.9 0.9 anti-slip mesh 06.160152.06 06.200188.06 06.160152.06 06.200188.06 06.160152.06 06.200188.06 ladder
09.160152.06 09.200188.06 09.160152.06 09.200188.06 09.160152.06 09.200188.06 Grating catalogue no. plate
17.160152.06 17.200188.06 17.160152.06 17.200188.06 17.160152.06 17.200188.06 tight plate 16.160152.06
16.200188.06 16.160152.06 16.200188.06 16.160152.06 16.200188.06

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

thick plate grating with a circumference seal is used.

In case of floor drains with a tight plate cover, an 8 [mm]

Drain grating with a tight plate

Mini FLOOR DRAINS horizontal with round top, two-part

WITH DN 50 OUTLET

WITH DN 110 OUTLET

Drain symbol Dm160/50H2 Dm200/50H2 Dm160/75H2 Dm200/75H2 Dm160/110H2 Dm200/110H2 Complete drain
catalogue number mat. 304 with anti-slip mesh grating 08.047050.23 08.045050.23 08.047075.23 08.045075.23
08.047110.23 08.045110.23 Complete drain catalogue number mat. 304 with ladder grating 08.047050.34
08.045050.34 08.047075.34 08.045075.34 08.047110.34 08.045110.34 Complete drain catalogue number mat. 304
with plate grating 08.047050.43 08.045050.43 08.047075.43 08.045075.43 08.047110.43 08.045110.43 Complete drain
catalogue number mat. 304 with tight plate grating 08.047050.50 08.045050.50 08.047075.50 08.045075.50
08.047110.50 08.045110.50 H2 75-125 75-125 75-125 75-125 75-125 75-125 DN 50 50 75 75 110 110 H 135 135 135
135 135 135 Dimensions h1 60 60 60 60 60 60 D 137 137 137 137 137 137 Ø 162 198 162 198 162 198 hr 25 25 25 25
25 25 Drain body catalogue number mat. 304 upper part 28.036110.06 28.034110.06 28.036110.06 28.034110.06
28.036110.06 28.034110.06 Drain body catalogue number mat. 304 lower part 50.059050.00 50.059050.00
50.059075.00 50.059075.00 50.059110.00 50.059110.00 Trap catalogue number 00.150110.01 00.150110.01
00.150110.01 00.150110.01 00.150110.01 00.150110.01 Strainer catalogue number 01.150110.00 01.150110.00
01.150110.00 01.150110.00 01.150110.00 01.150110.00 Trap flow rate [ l/s ] 0.9 0.9 0.9 0.9 0.9 0.9 anti-slip mesh
06.160152.06 06.200188.06 06.160152.06 06.200188.06 06.160152.06 06.200188.06 ladder 09.160152.06
09.200188.06 09.160152.06 09.200188.06 09.160152.06 09.200188.06 Grating catalogue no. plate 17.160152.06
17.200188.06 17.160152.06 17.200188.06 17.160152.06 17.200188.06 tight plate 16.160152.06 16.200188.06
16.160152.06 16.200188.06 16.160152.06 16.200188.06

Floor drain grating with a tight plate cover is removed using a suction cap. This is an additional element – it is not
available in the drain set.

 to order a complete drain made of 316 material, change the first digit of the catalogue number to "1", e.g.
10.056050.70

GRATING SYMBOLS

In case of floor drains with a tight plate cover, an 8 [mm] thick plate grating with a circumference seal is used.

ATT STAINLESS STEEL ENGINEERING

RODDING EYES

These sewage system elements are widely applied in industrial facilities (chemical, food, pharmaceutical plants etc.).
Use of a rodding eye allows quick access to the underfloor area and easy cleaning.

Rodding eyes are made of AISI304 or AISI316 grade steel. Penetration of water is prevented by the seal installed
between the bolted cover and the body.

Two types of covers are available:

 smooth (G),
 checker plate (R).

Edge finish allows for installation in any type of floor.

We offer rodding eyes for sewage pipes of diameters from DN110.

ADVANTAGES OF RODDING EYES

 resistant to corrosion,
 provide a barrier against odours,
 easy installation,
 dimensions of offered rodding eyes are adapted to the sewage system diameter,
 an aesthetically pleasing design element.

INSTALLATION OF RODDING EYES

 1. Drain pipe must be connected at an appropriate height.
2. While pouring concrete, the upper part of the rodding eye must be located approximately 1-1.5 [mm] below the
floor.

RODDING EYES
Symbol Catalogue number. Dimensions [mm] Rw 150/110 DN 110 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.050110.53 W 150 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.050110.54 H 126 Smooth plate grating 11.150141.02 Checker plate grating 13.150141.02

Symbol Catalogue number. Dimensions [mm] Rw 200/110 DN 110 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.051110.53 W 200 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.051110.54 H 127 Smooth plate grating 11.200195.02 Checker plate grating 13.200195.02

Symbol Catalogue number. Dimensions [mm] Rw 200/160 DN 160 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.051160.53 W 200 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.051160.54 H 127 Smooth plate grating 11.200195.02 Checker plate grating 13.200195.02

Symbol Catalogue number. Dimensions [mm] Rw 250/160 DN 160 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.052160.53 W 250 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.052160.54 H 127 Smooth plate grating 11.250245.02 Checker plate grating 13.250245.02

Symbol Catalogue number. Dimensions [mm] Rw 250/200 DN 200 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.053200.53 W 300 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.053200.54 H 127 Smooth plate grating 11.300295.02 Checker plate grating 13.300295.02

Symbol Catalogue number. Dimensions [mm] Rw 300/160 DN 160 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 08.053160.53 W 300 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 08.053160.54 H 127 Smooth plate grating 11.300295.02 Checker plate grating 13.300295.02

Symbol Catalogue number. Dimensions [mm] Rw 300/200 DN 200 Catalogue number of complete rodding eye mat.
304 with smooth plate grating 00.053200.53 W 300 Catalogue number of complete rodding eye mat. 304 with checker
plate grating 00.053200.54 H 127 Smooth plate grating 11.300295.02 Checker plate grating 13.300295.02

RODDING EYES

SMOOTH COVERCHECKER PLATE COVER

ELEMENTS OF RODDING EYE

 body,
 cover,
 fixing screws,
 seal.
LINEAR DRAINAGE

STANDARD CHANNELS

They are used to collect waste from the surface of the floor and drain it into the sewage system. Drainages of this type
are used in food plants (breweries, dairies, abattoirs) and chemical industry plants.

PRODUCTION TECHNOLOGY

Standard channels are manufactured in a wide range of dimensions and shapes. They are produced according to a
drawing prepared as a result of cooperation between an investor, a designer or a technologist and ATT engineers. By
standard, we use sheet metal of 2 [mm] thickness made of AISI 304, EN 1.4301 or AISI 316L, EN 1.4404 grade steel
for production. The drainpipes have built-in bottom slope, which by standard is 0,5%. There is a possibility to adapt the
size of the slope to a specific project. In order to facilitate installation, each channel is equipped with rectifying screws
and anchoring elements. They allow correct levelling of the drainpipe and its settling in concrete.

STANDARD CHANNELS
The channels are covered with grating. Depending on the application and load, we offer: 'anti-slip' mesh, ladder,
perforated sheet or plate grating. As a standard, the sections longer than 4 metres are joined by means of flanges with
gaskets.

STANDARD CHANNELS

ADVANTAGES OF THE CHANNELS

 drain large amounts of water,

 they may be easily configured and connected at required angles with other standard or slot channels,
 it is possible to apply various types of covering gratings,
 easy access for cleaning (rounded internal corners, removable gratings, waste basket with a trap),
 the channel edge can be adapted to the floor type (additional edge flanging for tiles, angle for expansion joints),
 a rodding eye is installed in the sewage system in the place of drainage.

DESIGN DESIGNATIONS

Standard channels are defined by determining the external width (S150, S200, S220, S600 etc.).

EXAMPLE

S150 – means a channel of external width of 150 [mm].

In case of a S150 channel, the grating width will be 107 [mm], and the hydraulic width will be Sh = 78 [mm]. When
determining the parameters of drainage, the basic guidelines are: the amount of discharge/type of load.

STANDARD CHANNELS
GRATINGS
The most typical grating to cover the standard channels is hygienic ladder grating. Our products range also includes the
anti-slip mesh grating, plate or perforated sheet gratings, all in different sizes and dimensions.

The gratings are selected depending on the place of installation of the channel, taking into account the load class and
functionality.

In the places of intensive forklift traffic, it is recommended to install a plate or ladder grating, while in case of large
amounts of drained water – a mesh and ladder grating.

CHANNEL EDGES FINISHING

The edge finishing should depend on the flooring and wastewater temperature. We can offer the following options:

 1 with downward flange (standard)

 2 with flange
 3 with raised back edge
 4 –with edge angle section for the expansion joint in the floor
 5 with tightly plately folded edges
 6 for a vinyl floor

ATT STAINLESS STEEL ENGINEERING

STANDARD CHANNELS
The following figure presents an example channel arrangement. The distribution of drains and the arrangement of the
channel, depends on the needs and the amount of water collected on the floor during the technological process. There is
a possibility to crossconnect the systems we have on offer.

Arrangement of the channel should be prepared by a designer in cooperation with a technologist. In case of any
technical doubts related to execution of a given drainage, our consultants can assist you. The outlet of the channel is
equipped with a trap and a waste basket, which secure the sewage system against solid contamination. The drainage
part is also equipped with a flange, which can be supplemented with a horizontal insulation.

Such a solution ensures tightness at the point where the outlet passes through the ceiling.

hp. – the initial height of the channel, the slope of the channel bottom depends on the specification requirements and
installation possibilities.
The table below shows the standard dimensions of the channel extension depending on the type of outlet used. The
extension is always 10 [mm] deeper than the channel it is conected to.

Due to the fact that the grating has bearing elements of one direction only, the extension is asymmetrical, which
prevents incorrect installation.

Outlet type Outlet diameter [mm] Diameter of the body [mm] Dimensions of the extension box (length X width ) [mm]
Channel without extension box Minimum channel width [mm] Minimum hydraulic width [mm] Flow rate 1.2 [ l/s ]
Wm150/Wm200/50,75,110V1/2,H1/2 50,75,110 110 205x200 S190 120 0.9 W200/75,110V1/2,H1/2 75, 110 157
245x240 S240 170 2.1 W250/110V1,H1 110 193 275x270 S270 200 3 W250/110V2,H2 110 172 275x270 S250 190 3
W300/110,160V1/2,H1/2 110, 160 255 355x350 S330 260 5.7 W400/200V1,H1 200 348 445x440 S430 360 13.9
W400/200V2,H2 200 320 445x440 S400 330 13.9

SLOT CHANNELS

Slot channels are an alternative solution to standard channels, used in places where high hydraulic capacity of the
channel is not required.

The perfect solution for rooms where condensate drips from machines and air conditioning devices, e.g. in dairies,
bakeries and swimming pools, as separation between dry and wet surfaces.

– they may be connected to other types of channels

PRODUCTION TECHNOLOGY

Slot channels are made of stainless steel sheets of 1.5-2 [mm] thickness. They can be non-slope and may be also
adapted to a particular floor thickness.

Drainage of water from a slot channel may be provided through a spigot or a floor drain with a waste basket and a trap.
By standard, the length of a channel with a single outlet should not exceed 10 [m]. Channel sections longer than 4 [m]
are connected via sealed flanges or they can also be welded during installation.

SLOT CHANNELS
MINI SLOT CHANNEL

MINI slot channels are made of 1.5 [mm] stainless steel sheets. The channel is not covered with any grating. It is
characterised by a smaller inlet opening and clearance width. They are used in applications where lower amounts of
wastewater are drained.

MAXI SLOT CHANNEL

MAXI slot channels are made of 2 [mm] stainless steel sheets. The channel is not covered with any grating, and it is
characterised by increased hydraulic efficiency compared to standard channels. It is characterised by a greater inlet
opening and clearance width. It is used wherever it is necessary to drain greater amounts of wastewater and, due to the
production process (lack of large solid contamination), there is no need to use a standard channel.
MINI STANDARD CHANNEL
The mini type standard channel combines the advantages of standard and slot channels. This is a channel of small
dimensions with a covering grating. Channels of this type are installed wherever small amounts of water must be
drained and it is necessary to use a channel with a possibility to install a rodding eye. By standard, stainless steel sheets
of 1,5-2 [mm] thickness made of AISI 304 or AISI 316 grade steel are used for production.

The slot channels and mini standard channel are equipped with levelling bolts and anchoring elements. The technology
of installation and further operation is the same as with standard channels.

Slot channel

Mini slot channel

Maxi slot channel

Mini standard channel

By default, channel lines are divided into 4-metre sections that allow for efficient and safe transport of the product. A
single element channel to a maximum length of 6 metres can be manufactured.

By standard, elements are connected using mounting flanges. This type of connection requires additional space of 25
[mm] under the bottom of the channel in order to ensure tightness between its sections. Alternatively, the drainage
system may be welded directly at the construction site.

CHANNELS INSTALLATION

1.Before installing the channel, bolt all of its parts together according to the installation and scheme guide to ensure
tightness of all flange connections (flangegasket-flange).

1. Install the channel prepared as above in the sewer service pipe's spigot.
2. The next step involves placing the channel at the proper height. The channel edge should be 1-1.5 [mm] below
the floor level.
3. When the channel is stabilized, we recommend securing it against displacement during concrete pouring.
4. Pour concrete on the levelling legs and anchoring elements.
5. In hard to access areas subjected to highest loads, insert the concrete with a spatula.
6. Make sure the elements are clean and free of dirt. Remove gratings, waste baskets and traps.
DEPTH OF CHANNELS
In case of channels with bottom slope, the channel depth increases along with its length. The depth of the outlet at the
drain depends on the initial height, length and specified channel slope.

LINEAR DRAINAGE

EDGES FILLING

Unfilled edge.

Edge filled with resin. It facilitates assembly and prevents empty spaces between concrete and the edge, thus protecting
the edge of the channel against deformation under heavy loads.

Edge filled with stainless steel. Edges filled with flat bars should be used in areas of high traffic intensity and high
utility loads.

The filling depends on the conditions in which the channel is placed (load-dependent).

TOP SLOT CHANNEL

GENERAL INFORMATIONS

Depending on flow rate and load class required, stainless steel top slot can be used for different types of channels made
from polymer, concrete, GRP or plastic.

The system after installation is totally secure and resistant to vandalism, which makes it suitable for applications in all
public areas. This solution is also perfect for using against building facades and in pedestrian areas thanks to the narrow
heelsafe slot.

Product features can be adjusted to meet required loading classes From A15 through B125 up to C250.

Material thickness used for production varies from 1 up to 3 mm.

APPLICATION
 commercial developments
 public areas
 car parks
 pedestrian zones
 residential areas
 landscaping
ADVANTAGES

 enforced top of the slot

 complete product line
 top slot gratings and revision boxes are easy for cleaning and maintenance
 easy installation
 installation possible with any paving material
 fast removal of surface water
 aesthetic look and durability
 parameters can be adjusted to the Clients requirements

TOP SLOT CHANNELS

EXAMPLE REALIZATIONS

BATHROOM SOLUTIONS

BATHROOM CHANNELS

CHANNEL WITH FLANGE FOR TILE FLOORS

Siphon capacity 0.49 l / grating 700 [mm] in length

channel with flange for tile floors length [mm] Cat. no. 700 00.067007.02 800 00.067008.02 900 00.067009.02 1000*
00.067010.02 1200* 00.067012.02

 At request

Gratings Name Length [mm] Cat. no. GOCCIA 02.067007*.03 VIPERA Available: 700, 800, 900 03.067007*.03
QUADRO At request: 1000, 1200 05.067007*.03 PIETRA 06.067007*.03 FAGIOLI 04.067007*.03 PIAZZA At
request: 700, 800, 900, 1000, 1200 01.067007*.03

 digits corresponding to the channel length, e.g.: 02.067007.03 is GOCCIA grating 700 [mm] in length

FAGIOLI QUADRO PIETRA

BATHROOM CHANNELS

CHANNELS WITH A RAISED BACK EDGE

channel with a raised back edge length [mm] Cat. no. 700 00.080007.02 800 00.080008.02 900 00.080009.02 1000*
00.080010.02 1200* 00.080012.02

Gratings Name Length [mm] Cat. no. GOCCIA Available: 700, 800, 900 At request: 1000, 1200 02.067007*.03
VIPERA 03.067007*.03 QUADRO 05.067007*.03 PIETRA 06.067007*.03 FAGIOLI At request: 700, 800, 900,
1000, 1200 04.067007*.03 PIAZZA 01.067007*.03

Siphon capacity 0.49 l / grating 700 [mm] in length

 on request
 digits corresponding to the channel length, e.g.: 02.067007.03 is GOCCIA grating 700 [mm] in length

FAGIOLI QUADRO PIETRA

ATT STAINLESS STEEL ENGINEERING

BATHROOM WALL DRAINAGE

GENERAL INFORMATIONS

BWD Series is a two-piece low profile wall recess linear drain, that is specifically designed for a truly invisible floor
drainage for an easy installation and with bonded waterproofing membrane.

BWD drain is designed to accommodate large, small format tiles or stone installations in a shower with a single plane
slope to the drain. Our linear drain is designed for commercial or residential projects and is intended for interior
applications.

ADVANTAGES

 design of the bottom allows laminar drainage of water

 allows for the use of tiles of any size and format - applicability of tiles into grating that blend
 with floor design
 made from heavy duty 304 stainless steel provides for long-lasting performance
 360 degrees rotating siphon

BWD - without flange

BWD - with flange

BATHROOM WALL DRAINAGE
SPECIFICATION

 Application: Commercial and Residential

 Diameter: 50 mm
 Drain Opening: 50 mm
 Fits Pipe Size: 50 mm

Symbol Total lenght [mm] Visible Lenght [mm] DUW-T-R-700 738 700 DUW-T-R-33 838 800 DUW-T-R-39 938
900

Top View

BATHROOM DRAINS

WL100/40 FLOOR DRAINS WITH VERTICAL OUTLET

Catalogue number mat. 304 Dimensions [mm] 57 35 1,5

The number of a complete floor drain must be supplemented with the appropriate symbol and/or the grating catalogue
no.

BATHROOM DRAINS

WL100/32 FLOOR DRAINS WITH HORIZONTAL OUTLET

Catalogue number mat. 304 00.064032.02-* Dimensions [mm] 1,5

The number of a complete floor drain must be supplemented with the appropriate symbol and/or the grating catalogue
no.

cat. no. 01.063040.01

cat. no. 02.063040.01

ATT STAINLESS STEEL ENGINEERING

cat. no. 03.063040.01

SHOWER BASES
Bathroom shower bases are made of stainless steel with the AISI 304 symbol. They are produced using decorative
sheet metal of 1.25 [mm] thickness. Circle-shaped embossing gives the structure the

required stiffness and at the same time provides antislippery protection. Drainage to the sewage system is carried out
via bathroom outlets available on the market.

APPLICATION

 any room for disabled persons in facilities such as health centres, hospitals, rehabilitation facilities, spas, etc.
 equipment for bathrooms in apartments, sport facilities, production facilities

ADVANTAGES

 easy cleaning
 strong disinfectants can be applied
 anti-bacterial features of stainless steel
 comfortable entrance to the shower cabin on a wheelchair without risk of damaging the structure or
encountering any obstacles
 easy assembly
 aesthetically pleasing appearance

Catalogue number dimensions [mm] height [mm]

STAINLESS STEEL SHOWER BASE

Manhole covers are available in various options and sizes. They are widely used in industrial and public facilities, i.e.
in shops, exhibition halls, restaurants, workshops, warehouses, parking lots, and other places where access to
underfloor installations is required.

The basic filling of the manhole cover is concrete class C35/45 and a smooth or corrugated steel plate. Alternative
filling is, for example, floor tiles, resin, paving stones.

Manhole covers are made of 2 or 3 [mm] thick stainless steel sheet of AISI 304 or AISI 316. This material allows
applying products in places with strict hygenic requirements.

Manhole coversconsist of upper and lower parts bolted to ensure safe closure. The product reinforcement is made of
"black steel" B500SP. An O-ring seal between the lower and upper parts is applied.

ADVANTAGES OF MANHOLE COVERS

 easy access to underfloor technological installations

 isolation against odours
  –waterproof
 simple opening system
 high durability

Type Height [mm] External CxD dimensions [mm] Internal AxB dimensions [mm] K3x3 50 430x430 300x300 K4x4
50 530x530 400x400 K4x6 50 530x730 400x600 K5x5 50 630x630 500x500 K5x7 50 500x700 K6x6 50 600x600
K6x8 50 630x930 600x800 K7x7 50 830x830 700x700 K8x8 50 930x930 800x800 K9x9 50 1030x1030 900x900
K10x10 50 1130x1130 1000x1000

A15 class manhole covers

Standard manhole covers are the basic solution to facilitate access to technological installations.

 easy access to underfloor installations

 insulation against odors
 waterproof,
 simple opening system
 high durability
 aesthetics

39

Dimensions of a gas-tight manhole cover

The set includes 2x handle Option: checker plate

Option: manhole cover lifter

ATT STAINLESS STEEL ENGINEERING

Class Type A x B [mm] C x D [mm] H [[mm] K3x3 300x300 460x460 85 K4x4 400x400 560x560 85 K5x5 500x500
660x660 85 K6x6 600x600 760x760 85 C250 K7x7 700x700 880x880 100 K8x8 800x800 980x980 100 K9x9
900x900 1080x1080 100 K10x10 1000x1000 1180x1180 100

ATT offers production of customized manholes to meet individual design requirements.

Class Type A x B [mm] A1 x B1 [mm] C x D [mm] H [mm] H1 [mm] K3x3 300x300 340x340 494x494 85 180 K4x4
400x400 440x440 594x594 85 180 K5x5 500x500 540x540 694x694 85 180 K6x6 600x600 640x640 794x794 85 180
D400 K7x7 700x700 740x740 914x914 100 195 K8x8 800x800 840x840 1014x1014 100 195 K9x9 900x900 940x940
1114x1114 100 195 K10x10 1000x1000 1040x1040 1214x1214 100 195

Option: modular gas-tight manhole cover

Dimensions of a gas-tight manhole cover with gas lifters

Class Type A x B [mm] C x D [mm] H [mm] H1 [mm] K6x6 600x600 770x770 100 200 K7x7 700x700 870x870 100
200 B125 K8x8 800x800 970x970 100 200 K9x9 900x900 1070x1070 100 200 K10x10 1000x1000 1170x1170 100
200

The set includes 2x handle

Option: checker plate

ATT STAINLESS STEEL ENGINEERING

MANHOLE COVERS
Class Typ A x B [mm] C x D [mm] H [mm] H1 [mm] K6x6 600x600 770x770 100 200 K7x7 700x700 870x870 100
200 C250 K8x8 800x800 970x970 100 200 K9x9 900x900 1070x1070 100 200 K10x10 1000x1000 1170x1170 100
200

Class Typ A x B [mm] C x D [mm] H [mm] H1 [mm] K6x6 600x600 770x770 100 200 K7x7 700x700 870x870 100
200 D400 K8x8 800x800 970x970 100 200 K9x9 900x900 1070x1070 100 200 K10x10 1000x1000 1170x1170 100
200

ROUND MANHOLE COVERS

ATT's range of products is complemented by round manhole covers. They are manufactured in two versions: for filling
or with a stainless checker plate. The engineering department adapts the dimensions and structures resulting from the
expected load class as per individual specifications of the client.
ROUND MANHOLE COVERS

Class A15 Class B125 Class C250 Class D400 Type A [mm] B [mm] C [mm] h [mm] Hc [mm] h [mm] Hc [mm] h
[mm] Hc [mm] h [mm] Hc [mm] D600 600 750 785 60 80 80 100 100 150 100 200 D700 700 850 885 60 80 80 100
100 150 100 200 D800 800 950 985 60 80 80 100 100 150 100 200 D900 900 1050 1085 60 80 80 100 100 150 100
200 D1000 1000 1150 1185 60 80 80 100 100 150 100 200

ACCESS COVERS

with insulation

with a ventilation cup

with gas lifters (the number of pieces depends of the size of access cover)

Type A x B [mm] C x D [mm] E x F [mm] WB-1 4x4 400 x 400 484 x 484 543 x 543 WB-1 5x5 500 x 500 584 x 584
643 x 643 WB-1 6x6 600 x 600 684 x 684 743 x 743 WB-1 7x7 700 x 700 784 x 784 843 x 843 WB-1 8x8 800 x 800
884 x 884 943 x 943 WB-1 9x9 900 x 900 984 x 984 1043 x 1043 WB-1 10x10 1000 x 1000 1084 x 1084 1143 x 1143

ACCESS COVERS
2-part Access Covers

Type A x B [mm] C x D [mm] E x F [mm] WB-2 6x12 600 x 1200 626x684 743x1343 WB-2 8x16 800 x 1600
826x884 943x1743

ACCESS COVERS
3-part Access Covers
ALUMINIUM MANHOLE COVERS
Aluminium manhole covers are used in industrial and public facilities: in shops, exhibition halls, restaurants,
workshops, and warehouses, wherever access to underfloor installations is required.

Floor tiles, terracotta or other materials can be used as finishing material of the upper part of a manhole cover. Products
are available in various options and sizes. These elements provide a barrier against oudours and liquids. Three series
are available: KA-light, KA-heavy and KAextra heavy.

KA-Light series – manhole covers equipped with two seals: one in the bottom and T-seal * in the frame. Four heights
are available: 40 [mm], 60 [mm], 80 [mm], 100 [mm].

Serial Number External dimension AxB [mm] Internal dimension CxD [mm] Height H [mm] Load [Kn] KA-
40/60/80/100L- 3x3 300x300 240x240 40/60/80/100 40 KA-40/60/80/100L- 4x4 400x400 340x340 40/60/80/100 40
KA-40/60/80/100L- 5x5 500x500 440x440 40/60/80/100 40 KA-40/60/80/100L- 6x6 600x600 540x540 40/60/80/100
40 KA-40/60/80/100L- 7x7 700x700 640x640 40/60/80/100 20 KA-40/60/80/100L- 8x8 800x800 740x740
40/60/80/100 20 KA-40/60/80/100L- 9x9 900x900 840x840 40/60/80/100 20 KA-40/60/80/100L-10x10 1000x1000
940x940 40/60/80/100 20

ALUMINIUM MANHOLE COVERS

KA-Heavy series – manhole covers equipped with three seals: two in the bottom and a T-seal * in the frame. Four
heights are available: 40 [mm], 60 [mm], 80 [mm], 100 [mm].

Serial Number External dimension AxB [mm] Internal dimension CxD [mm] Height H [mm] Load [Kn] KA-
40/60/80/100H- 3x3 300x300 210x210 40/60/80/100 60 KA-40/60/80/100H- 4x4 400x400 310x310 40/60/80/100 60
KA-40/60/80/100H- 5x5 500x500 410x410 40/60/80/100 60 KA-40/60/80/100H- 6x6 600x600 510x510 40/60/80/100
60 KA-40/60/80/100H- 7x7 700x700 610x610 40/60/80/100 40 KA-40/60/80/100H- 8x8 800x800 710x710
40/60/80/100 40 KA-40/60/80/100H- 9x9 900x900 810x810 40/60/80/100 40 KA-40/60/80/100H- 10x10 1000x1000
910x910 40/60/80/100 40

KA- Extra Heavy series – manhole covers equipped with a double system, including three seals: two in the bottom and
a T-seal * in the frame. Two heights are available: 80 [mm] are 100 [mm]. Load class: 125 Kn.

Serial Number External dimension AxB [mm] Internal dimension CxD [mm] Height H [mm] Load [Kn] KA-
80/100EH- 3x3 300x300 210x210 80/100 125 KA-80/100EH - 4x4 400x400 310x310 80/100 125 KA-80/100EH- 5x5
500x500 410x410 80/100 125 KA-80/100EH- 6x6 600x600 510x510 80/100 125 KA-80/100EH- 7x7 700x700
610x610 80/100 125 KA-80/100EH- 8x8 800x800 710x710 80/100 125 KA-80/100EH- 9x9 900x900 810x810 80/100
125 KA-80/100EH-10x10 1000x1000 910x910 80/100 125

To provide appropriate efficiency of manhole covers, please follow the guidelines below during the installation
process:

1. During installation, the upper part and the lower part of the manhole cover must be closed.
2. In order to avoid deformation of the frame, which would cause problems during further use of the manhole
cover, place spacers between the edges of the upper and lower parts.
3. It is necessary to correctly level and set the manhole

cover in the previously prepared well.

 1. The manhole cover must be stabilised using concrete of malleable consistency.
2. The upper part of the manhole cover, including the reinforcement, must be filled with concrete of B30 class or
higher, depending on the product's dimensions and the load class.
3. Concrete is poured up to the height that allows for later installation of the floor.

MEDIA BOXES

Media boxes are used wherever it is necessary to access the telephone lines and electrical sockets in a floor. The may
be used in public facilities, markets, industrial halls, warehouses, as well as wherever commercial stands are
periodically opened or it is necessary to connect a specific device.

Boxes are made of EN 1.4301 (AISI304), EN 1.4404 (AISI316L) stainless steel. The box is equipped with a
sandblasted lid with a hinged lid and a gasket to guarantee tightness. It ensures easy access to the interior of the box
without the necessity to remove the cover. The lid closing system secures the box against unauthorised opening.

SK1 SK2

ATT offers SK1 single-chamber, SK2 double-chamber boxes, as well as multi-chamber boxes upon a client's individual
request.

type catalogue number outside dimension A x B [mm] inside dimension C x D [mm] height H [mm] 00.090001.04
00.090002.04