Designed by Ekaterina Coskun

Bee Gnome
Crochet Pattern

Gnomes Collection
 DEAR CROCHET FRIEND,
Let’s crochet together cute Scandinavian gnome in
Bee-look.
For your creative crochet process you need some
yarn, hook, needles and your good mood.
I hope you’ll enjoy the process.

SOME RECOMMENDATIONS:
✅ Crochet continuously in rounds, unless otherwise
specified.
✅ In order not to skip worked stitches, use stitch marker in
the beginning of each row.
✅ You can use any suitable yarn of any other thickness,
using the matching crochet hook to achieve the good density
of crocheting. But keep in mind that the finished toy will have a
different size.
✅ The choice of stuffing material is also up to you.
✅ For filling the pieces of a toy I also recommend you to
use any kind of thin wooden stick, the sushi stick is quite
good for this purpose.
✅ The final toy's height can vary due of used materials, thread's
thickness, crochet density.

Finished toy's height is about 12 cm / 5 inches, if used stated materials.

In case you have any questions feel free to contact me any comfortable
way:
Instagram: @mikadocutes
Facebook: @mikadocutes / @mikadotoys
E-mail: [email protected]
Telegram: @mikadocutes

COPIRIGHT: © All rights reserved by Ekaterina Coskun MiKaDoCutes.

Please, respect the time, that author spend to release the pattern. The pattern is available
FOR PERSONAL USE ONLY! You are not allowed to share, reproduce, resell, publish,
translate and alter the pattern in whole or part! You may sell finished products handmade by
yourself from this pattern, but please, mention the author Ekaterina Coskun @mikadocutes
or use #mikadocutes hashtag.
MATERIALS AND TOOLS:
✅ Sport weight yarn (12 wpi): I used YarnArt Begonia - 100% cotton -
169 m/ 50 gr. Colors: milk, white, dark brown, yellow.
✅ 1.5 mm crochet hook
✅ Tapestry pins, scissors
✅ Sewing needle
✅ Stuffing material, fiberfill
✅ Decoration to your taste: buttons, beads, small beads, sequins.

ABBREVIATIONS (US):
MR - magic ring
ch - chain
st - stitch
sc - single crochet
sl st - slip stitch
lp - loop (loops)
inc - increase
dec - decrease*
R - rows, rounds
BLO/FLO – back/front loops only
dc - double crochet
hdc - half double crochet
(...) * n - repeat instructions in brackets n times [XX] - the number of
stitches in the end of the row
___
*try to do invisible decreases
** To change color you have to crochet new yarn through the two
loops of your previous stitch on hook.
LEGS*MAKE 2
Dark brown color (shoes)
R1: 6 sc into MR (6)
R2: inc*6 (12)
R3: (sc, inc)*6 (18)
R4-5 (2 rounds): 18 sc
R6: (sc, dec)*6 (12)
R7: fold the leg in half and work 6 sc to both sides of it, break yarn, stuff
before closing the hole. (6)
We will attach them to the body as we crochet.

NOSE
Milk color
R1: 6 sc into MR (6)
R2: inc*6 (12)
R3: (sc, inc)*6 (18)
R4-5 (2 rounds): 18 sc
R6: (sc, dec)*6 (12)
Break yarn. We will attach the nose to the body as crochet.
ARMS*MAKE 2
R1: milk color 6 sc into MR (6)
R2: (sc, inc)*3 (9)
R3: 9 sc
R4-6 (3 rounds): dark brown color 9 sc, break the milk yarn
R7: dec, 7 sc (8)
R8-9 (2 rounds): 8 sc
R10: dec, 6 sc (7)
R11-12 (2 rounds): 7 sc
R13: dec, 5 sc (6)
R14-16 (3 rounds): 6 sc
R17: fold the arm in half, to the both sides of it crochet 3 sc,
break yarn (3)
Do not stuff arms. We will attach them to the body as we crochet.
BODY
LEGS-BODY-ARMS-HEAD-BEARD- THE ONE PIECE

R1: dark brown 8 sc into MR (8)

R2: inc*8 (16)
R3: (sc, inc)*8 (24)
R4: (2 sc, inc)*8 (32)
R5: (3 sc, inc)*8 (40)
R6: (4 sc, inc)*8 (48)
R7: (5 sc, inc)*8 (56)
R8: 56 sc
R9: (attach legs) 20 sc, 6 sc together with the first leg, 4 sc, 6 sc together
with the second leg, 20 sc (56), see the photo guide next page
R10-11 (2 rounds): yellow 56 sc
R12-13 (2 rounds): dark brown 56 sc
R14-15 (2 rounds): yellow 56 sc
R16: dark brown 56 sc
R17: (5 sc, dec)*8 (48)
R18: yellow 48 sc
R19: (4 sc, dec)*8 (40)
R20-21 (2 rounds): dark brown 40 sc, break yellow yarn
R22: (3 sc, dec)*8 (32)
R23: (attach arms) 9 sc***, 3 sc together with the first hand, 12 sc
between arms in the front side of the toy, 3 sc together with the second
hand, 5 sc*** (32)
*** the number of stitches before and after attaching arms may be different
(because of different density, materials etc.). The arms should be attached
symmetrically. Keep in mind that the color change on the arms should face inside
while attaching it to the body.
R24: 32 sc
R25: (2 sc, dec)*8 (24)
R26: 24 sc

Change color to white, break the dark brown yarn, stuff the body.
R27 (neck): 24 sc, do not break yarn and continue crocheting the head.
BODY. PHOTO GUIDE
HEAD
ADDITIONAL ABBREVIATIONS FOR THE BEARD:
HS-hair strand (of the beard): 16 ch, start crocheting into the 2nd ch from
the hook towards head:
(1 inc, 2 sc)*5 (20), continue working according to the pattern into the
next 1st stitch.

White color (continue crocheting from the body).

Find the photo guide for this piece next page.

R1: 24 inc (48)

R2-3 (2 rounds): 48 sc
R4: the beard has to be strictly in the front side** 16 sc, (HS, 2 sc)*12, 8
sc (48)
**fold the head in half and mark the 24 stitches in front side, if needed. Keep in mind
that the number of stitches before and after crocheting the beard may vary, but in
total it should make 24 stitches.
R5: crochet into the stitches of head only between strands of the beard
(HS) 48 sc
R6: 48 sc
R7: 17 sc***, (HS, 2 sc)*11, 9 sc*** (48)
***the hair strands have to be over and between the strands in the round 5; the
number of stitches before and after crocheting the beard may vary.
R8: crochet into the stitches of head only between strands of the beard
(HS) 48 sc

Color change to milk, break the white yarn.

R9: 24 sc****, (attach nose in rounds 10 and 11) 6 sc with the bottom side
of the nose, 18 sc**** (48)
R10: 24 sc****, 6 sc with the upper side of the nose, stuff it before closing
the hole, 18 sc**** (48)
****the number of stitches before and after attaching the nose may vary, nose has to
be located in the center of the face over the beard strictly.
R11-13 (3 rounds): 48 sc
R14: (6 sc, dec)*6 (42)
R15: (5 sc, dec)*6 (36)
R16: (4 sc, dec)*6 (30)
R17: (3 sc, dec)*6 (24)
R18: (2 sc, dec)*6 (18), stuff the head.
R19: (1 sc, dec)*6 (12)
R20: dec*6 (6), break yarn, fasten off.
HEAD.PHOTO GUIDE
HAT
R1: yellow = 6 sc into MR (6)
R2: (sc, inc)*3 (9)
R3: 9 sc
R4: (2 sc, inc)*3 (12)
R5: 12 sc
R6: (3 sc, inc)*3 (15)
R7: 15 sc
R8: (4 sc, inc)*3 (18)
R9: 18 sc
R10: (2 sc, inc)*6 (24)
R11: 24 sc
R12: (3 sc, inc)*6 (30)
R13: 30 sc
R14: (4 sc, inc)*6 (36)
R15: 36 sc
R16: (5 sc, inc)*6 (42)
R17: 42 sc
R18: (6 sc, inc)*6 (48)
R18: 48 sc
R19: (11 sc, inc)*4 (52)
R20-25 (6 rounds): 52 sc
R26: (12 sc, inc)*4 (56)
R27-29 (3 rounds): 56 sc
R30: (3 sc, inc, 3 sc)*8 (64)
R31: (7 sc, inc)*8 (72)
R32: (4 sc, inc, 4 sc)*8 (80)
R33: (9 sc, inc)*8 (88)
R34: 88 sc, break yarn, weave in tail.

With the yarn tail left from the round 34 stretch it a little up to the hat. Put the
hat onto the head, so that the hat should totally cover the head down to the neck
at the back side and to the nose and the beard line in the front side. Sew the hat
on with needle. Weave in the end.
GOOGLES
LENSES
Lens 1: dark brown = into MR = 20 sc into MR (20), pull the ring to make
a circle - do not fasten it too tightly, then work 1 sl st into the fist st,
break yarn.
Lens 1: dark brown = into MR = 20 sc into MR (20), pull the ring to make
a circle - do not fasten it too tightly, then work 1 sl st into the fist st, DO
NOT break yarn continue crocheting the googles.

STRIPE
After you've finished the 2nd lens DO NOT break yarn, continue
crocheting the stripe.

Chain 38, attach lens 1 with 1 sl st into the first sc of lens 1

Work in a round: 10 sc along lens 1, attach lens 2 from the opposite side
into the 11th sc of it and work 10 sc along lens 2, continue crocheting
into the ch 38 sc.

Turn both lenses down to crochet into the loose stitches:

10 sc to lens 1, 10 sc to lens 2, 1sl st to the 1st st of the chain.

Break yarn, leave long tail for sewing.

Sew the googles onto the hat, so that the stripe will be sewn at the neck
area on the back and the lenses over the nose in front. Fasten and hide
all the holes while sewing.

Firstly, sew the googles in a round to the bottom side, then sew it in a
round to the upper side. Weave it tails when finished
GOOGLES
ANTENNAS * MAKE 2
R1: dark brown 6 sc into MR (6)
R2: inc*6 (12)
R3-4 (2 rounds): 12 sc
R5: dec*6 (6), stuff the piece
R6-11 (6 rounds): 6 sc

Break yarn, Leave long tail for sewing.

Sew the antennas symmetrically over the googles.

WINGS * MAKE 2
R1: white 6 sc into MR (6)
R2: inc*6 (12)
R3: (sc, inc)*6 (18)
R4: (2 sc, inc)*6 (24)
R5-7 (3 rounds): 24 sc
R8: (2 sc, dec)*6 (18)
R9: 18 sc
R10: (sc, dec)*6 (12)
R11: 12 sc,
R12: dec* 6 (6), fasten off. Do not stuff.

Break yarn, Leave long tail for sewing.

Sew the wings symmetrically on the back of your gnome.

My Congratulations! Your Bee Gnome is absolutely ready to make
magic and bring good mood all around.

Thank you for crocheting with me!

I'd love to see your little gnomes very much! Please, do not forget to
mention me @mikadocutes in your posts with them or use
#mikadocutes hashtag. I'm gonna like them with pleasure.

I'm open to your offers and recommendations!

Let's meet again!

Sincerely yours,
Ekaterina Coskun.