Uniservice Unisafe EA05 Descaler MTA TechInfo
Uploaded by
Uniservice Unisafe SrlUniservice Unisafe EA05 Descaler MTA TechInfo
Uploaded by
Uniservice Unisafe SrlPart # EA05
25 L 0731851223880
DESCALER MTA
Sewage Water Systems Descaling
Technical Information
USAGE AREAS
Physical Data
Appearance: brown liquid Descaler
Average density: 1.15 at 20° C
Flammability: non-flammable PACKAGING
Corrosive action: corrosive on aluminium, zinc and related alloys
pH (1% solution): 1.2
Description
Liquid descaler containing a metal corrosion inhibitor.
Heavy duty carbon remover
Cleans down to metal surfaces
Fast and effective usage
Application
Descaler for any type of metal (except for aluminium and zinc).
Advantages
This product has a metal protection through a corrosion inhibitor, coupled with
a rapid acid solution action for deep scale penetration. DESCALER MTA has
demonstrated its unique ability to effectively clean and eliminate uric acid build-
ups in sanitation vacuum systems to the marine industry. Ship owners are turning
to Uniservice Unisafe as more and more cruise vessels face clogging problems in
their vacuum systems. DESCALER MTA is an online solution for eliminating hard
deposits inherent in vacuum systems formed by uric acid.
Directions For Use – Product Dose
DESCALER MTA can be administered either through circulation or immersion,
depending on the size of the equipment that requires descaling.
By Circulation
1. Preparation
A. Empty the circuit to be descaled.
B. Prepare a 50% DESCALER MTA solution.
C. Install a fume vent at the top of the circuit to be descaled.
2. Descaling
A. After removing the cleaning solution, gradually add the DESCALER
MTA solution. Allow this solution to circulate for approx. 10-12 hours
depending on scale thickness.
B. During descaling, fumes and foam are formed. When descaling is
completed, empty the circuit from the bottom, and, where feasible,
remove any scale deposits left with pressure water hose.
© 2024 Uniservice Unisafe srl 1 / 2 www.uniservicemarine.com
Part # EA05
25 L 0731851223880
DESCALER MTA
Sewage Water Systems Descaling
3. Rinsing Important Notice
A. Add water to the circuit.
B. Allow it to circulate for at least 1 hour. While the descriptions, designs, data and information
contained herein are presented in good faith and
4. Neutralisation believed to be accurate, this information is provided for
Neutralise any acid residues left through circuit your guidance only. Because many factors may affect
passivation with 1%, or 2% if in fresh water, processing or application/use, we recommend that you
ALKALINITY CONTROL solution allowed to do a test to determine the suitability of a product for your
circulate for 2 hours. particular purpose prior to use. No warranties of any
kind, either expressed or implied, including warranties
By Immersion Bath of merchantability or fitness for a particular purpose,
Similar operations as described above: are made regarding products described or designs, data
1. Prepare the solution at the required concen- or information set forth, or that the products, designs,
tration (see paragraph on Dosage). data or information may be used without infringing the
2. Shake the solution (with compressed air or intellectual property rights of others. In no case shall the
pump) to remove the acid film in contact with descriptions, information, data or designs provided be
the descaled surface. considered a part of our terms and conditions of sale.
Further, you expressly understand and agree that the
Note: DESCALER MTA can be introduced through manual descriptions, designs, data and information furnished by
dosing into a vessel's head or via a simple yet effective Uniservice Unisafe Srl hereunder are given gratis, and
dosing unit. Please contact a Uniservice representative Uniservice Unisafe Srl assumes no obligation or liability
for more details. for the description, designs, data and information given
or results obtained, all such being given and accepted
Handling Precautions at your risk. Product images are for reference purposes
only.
This product is an acid, and although it is inhibited and
buffered by a special additive to limit acid fumes, it Contact
should be handled in compliance with recommended
safety requirements (e.g. gloves, safety goggles, and, in For further information, please contact your local
case splashes are possible, an apron and boots). In the Uniservice Unisafe sales representative or get in touch
event of contact with the eyes, rinse immediately with with us:
plenty of water or a sodium bicarbonate solution.
Uniservice Unisafe srl
Safety and Environment (HSE) Marine Chemicals Division
building Via al S.N.S. della Guardia 58a
Uniservice Unisafe Srl have carefully developed their Genoa 16162 Italy
products to minimize the safety risks and environmental phone (+39) 010 711 395
impact of using their products. However, Uniservice Fax (+39) 010 713 120
advises that, prior to using its products, users should desktop www.uniservicemarine.com
read in detail the accompanying Safety Data Sheet desktop www.uniservicemarine.com
and ensure that its products are applied within the
required HSE regulations of the country in which the
user operates. Best practice and safety requirements
should be followed which will likely include method
statements and risk assessments, together with any
specific requirements of the user’s own company HSE
requirements.
