0% found this document useful (0 votes)
59 views1 page

Thr. Plate: Exp No

The document provides technical specifications for a pump, including displacement, maximum pressure, speed rate, and input shaft torque. It details the required parts and assembly instructions, emphasizing the proprietary nature of the information. The document is intended for internal use by Parker-Hannifin Corporation and includes specific part numbers and dimensions.

Uploaded by

zbb853
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
59 views1 page

Thr. Plate: Exp No

The document provides technical specifications for a pump, including displacement, maximum pressure, speed rate, and input shaft torque. It details the required parts and assembly instructions, emphasizing the proprietary nature of the information. The document is intended for internal use by Parker-Hannifin Corporation and includes specific part numbers and dimensions.

Uploaded by

zbb853
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PUMP DATA 22 21 27 28 29 26

DISPLACEMENT 60,0 ccm


25.4MM SPLIT FLANGE
MAX. PRESSURE 290 bar
METRIC
SPEED RATE 500 TO 2800 minij M10X1.5 - 6H THD
22.0 DEEP - 4 REQ’D
32
MAX. INPUT SHAFT TORQUE 328 Nm
31
ROTATION ANTI CLOCKWISE

80.0
42.6 6
33.3
7
FULL
SPLINE
35

80.0
NOTE
1 FOR ASSEMBLY INSTRUCTIONS SEE DWG. NO. "640-B1"
"PGP640 PUMP ASSEMBLY INSTRUCTIONS".
2 NAMEPLATE LOCATION MAY VARY DUE TO DESIGN
CRITERIA OR MANUFACTURING LOCATION.
38.1MM SPLIT FLANGE OPTIONAL FOR #31 & #32 GLUED LABEL 391 2183 396
SAE INVOLUTE SPLINE METRIC 28 391 2882 491 2 SEAL, BK-UP 36
13 TEETH - 16/32 PITCH 16 17 M12X1.75 - 6H THD 27 391 2882 490 2 SEAL. CHANN. 35 391 0482 232 4 BUSH
15
FLAT ROOT SIDE FIT 18.0 DEEP - 4 REQ’D 26 391 2185 143 2 THR. PLATE 34
MAJOR DIA 21.67-21.79 25 33 391 2286 004 1 PLUG
MINOR DIA 18.631 MAX. 24 32 391 1432 004 2 SCREW. DR.
23 31 391 2183 227 1 NAMEPLATE
22 391 2686 016 1 RING, SNAP 30
A2
21 391 2883 103 2 SEAL. LIP 29 391 2881 611 1 SEAL. SECT.
174.0 ITEM PART NO REQD ITEM PART NO REQD

73.0 73.0 195.8


41.2
.0
20

20
Ø1

Ø 14.1
19
18
17 391 1451 240 4 M14 NUT
Ø 101.6 -0.05

16 391 1425 689 4 M14 SCREW


15 391 3782 329 4 WASHER
14

170.8
13
12
25.4 11
110.8

10
9
9.4 8
7 704 2760 000 1 DRIVEN GEAR
33 15.8 6 704 1160 400 1 DRIVE GEAR
5
1 3 4
138.4 3 704 8160 529 1 BODY
2
1 704 5421 000 1 FLANGE
THIRD ANGLE PROJECTION WITH EXCEPTION OF DRIVE SHAFT, FLANGE SPIGOT AND MTG. FACE ITEM PART NO REQ’D DESCRIPTION
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION
PLUS AREAS AROUND PORTS, ALL SURFACES ARE PAINTED ("PARKER"). THIS DOCUMENT IS FURNISHED ON THE UNTERSTANDING THAT THE DOCUMENT AND THE INFORMATION IT CONTAINS
WILL NOT BE COPIED OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARKER,
Pump & Motor Division
BLACK ZSS - A1 ( AA-O-05.2 ) AND WILL BE RETURNED AND ALL FURTHER USE DISCONTINUED UPON REQUEST BY PARKER. ALL RIGHTS RESERVED.

Chemnitz
EXP NO.
A1 PGP640A0600AD1H3MT5T3B1B1
MATERIAL ADM DR.BY DATE CH.BY DATE SCALE
P
FIRST USED
CTR WS 20JAN10 JS 20JAN10 1/2
A2 391 2883 103 2 X WAS 1 X & 391 2686 016 ADDED REV
05AUG10
10 - 01 - 649 A1 PGP640A0600AD1H3MT5T3B1B1 WAS PGP640A0600AD1H3N...
H.E.-STD:
DTE
704 9112 035
MM
704 9112 035 SYM. REVISIONS 05AUG10 WS 10-08-609
WT 22.6 kg DIMENSIONS ARE
 2010 Parker Hannifin Corporation

You might also like