INSTALLATION

INSTRUCTIONS
USER GUIDE
MIDEA Crown Front Load Washing Machine 7.5kg

360279
To prevent the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time
CONTENTS

Safety Instructions
Safety Instructions .................................................. 2

Installation
Product Description ................................................ 7
Installation ........................................................... 8

Operations
Quick Start ............................................................. 11
Before Each Washing .............................................. 12
Detergent Dispenser ............................................... 13
Control Panel ......................................................... 15
Option.................................................................... 16
Other Functions ...................................................... 17
Programmes .......................................................... 20
Washing Programmes Table ..................................... 21

Maintenances
Cleaning And Care ................................................. 22
Trouble Shooting .................................................... 25
Technical Specifications ......................................... 26
Testing methods ..................................................... 27

1
SAFETY INSTRUCTIONS

Safety Instructions
For your safety,the information in this manual must be followed
to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury or loss of life.
Explanation of the symbols:

！ Warning!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.

Caution!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the
environment.

Note!
This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries.

！ Warning!

The electric shock!

• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

2
SAFETY INSTRUCTIONS
• The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
• Before any maintenance the device, unplug the
appliance from the mains.
• Always unplug the machine and turn off the water
supply after use. The max. inlet water pressure, in
pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into
an earthed three-pole socket. Check carefully and make
sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must
be connected by a qualified technician in accordance
with the manufacturer's instructions and local safety
regulations.
Risk to children!
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
• Children of less than 3years should be supervised to
ensure that they do not play with appliance.
• Animals and children may climb into the machine. Check
the machine before every operation.
• Kids should be supervised that they do not play with
the appliance.

3
SAFETY INSTRUCTIONS
• Glass door may be very hot during the operation. Keep
kids and pets far away from the machine during the
operation very wet rooms as well as in the rooms with
explosive or caustic gas.
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
• Plug must be accessible after installation.
Risk of explosion!
• Do not wash or dry articles that have been cleaned in, washed
in, soaked in, or dabbed with combustible or explosive
substances( such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) This may result in
fire or explosion.
• Before hand thoroughly rinse items of washing by hand.
Caution!

Installing the product!

• This washing machine is for indoor use only.
• It isn't intended to be built-in using.
• The openings must not be obstructed by a carpet.
• Washing machine shall not be installed in bath room or
very wet rooms as well as in the rooms with explosive
or caustic gases.
• The washing machine with single inlet valve only can be
connected to the cold water supply. The product with
double inlet valves should be correctly connected to the
hot water and cold water supply.
• Plug must be accessible after installation.
4
SAFETY INSTRUCTIONS
• Remove all packages and transport bolts before using
the appliance. Otherwise, serious damage may result.
Risk of damaging appliance!
• Your product is only for home use and is only designed
for the textiles suitable for machine washing.
• Do not climb up and sit on top cover of the machine.
• Do not lean against machine door.
• Cautions during Handling Machine:
1.Transport bolts shall be reinstalled to the machine by
a specialized person.
2.The accumulated water shall be drained out of the
machine.
3.Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Machine door can
not be used as the handle during the conveyance.
4.This appliance is heavy. Transport with care.
• Please do not close the door with excessive forces. If it
is found difficult to close the door, please check if the
clothes are put in or distributed well.
• It is forbidden to wash carpets.
Operating the appliance!
• Before washing the clothes at first time, the product
shall be operated in one round of the whole procedures
without the clothes inside.
• Flammable and explosive or toxic solvents are forbidden.
Gasoline and alcohol etc.Shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.
5
SAFETY INSTRUCTIONS
• Make sure that all pockets are emptied. Sharp and rigid
items such as coin,brooch,nail,screw or stone etc. may
cause serious damages to this machine.
• Please check whether the water inside the drum has
been drained before opening its door.Please do not open
the door if there is any water visible.
• Be careful of burning when the product drains hot
washing water.
• Never refill the water by hand during washing.
• After the program is completed, Please wait for two
minutes to open the door.
Packaging/Old appliance
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or
human health from uncontrolled waste disposal,recycle
it responsibly to promote the sustainable reuse of
material resources.To return your used device, please use
the collection systems or contact the retailer where the
product was purchased. They return and can take this
product for environmental safe recycling.

6
INSTALLATION
Product Description
Top cover

Water supply hose

Control panel

Power supply cord

Detergent dispenser

Drum

Door
Service filter

Drain hose

Note!
• The product line chart is for reference only, please refer to real product as
standard.

Accessories

Transport Supply hose Supply hose hot Drain hose support Owner’s manual
hole plug cold water water (optional) (optional )

7
INSTALLATION
Installation
Installation area
！ Warning!
• Stability is important to prevent the product from
wandering!
• Make sure that the product should not stand on w
w
the power cord.
W> 20mm

Before installing the machine, the location characterized

as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
Unpacking the washing machine
！ Warning!
• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
• There is a risk of suffocation ! Keep all packaging
well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
！ Warning!
• You must remove the transport bolts from the backside before using the product.
• You’ll need the transport bolts again if you move the product , so make sure
you keep them in a safe place.

Please take the following steps to remove the bolts:

1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
8
INSTALLATION

Levelling the washing machine

！ Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
1 2 3 4
Lock nut
foot
Raise Lower

Connect Water Supply Hose

！ Warning!
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
1 2 slide bushing 3 4

clamp nut

Loosen clamp nut and Tighten clamp nut Press slide bushing, Connection finished
four bolts insert inlet hose into
connecting base
2.Connection between screw tap and inlet hose.
slide bushing

Tap with threads and inlet hose Special tap for washing machine

9
INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
water Inlet valve water supply hose

Drain Hose
！ Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
Max.100cm

Min.60cm

Water
trough

Note!
• If the machine has drain hose support, please install it like the following .

Trough
Hose Retainer
Max.100cm
Min.60cm

d
B in
Max.100cm
Min.60cm

！ Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.

10
OPERATIONS
Quick Start
Caution!
• Before washing, please make sure it’s installed properly.
• Before washing at first time, the washing machine shall be operated in one
round of the whole procedures without clothes in as follows.

1. Before Washing
1 2 3 4 5
Main
wash

Softener

Prewash

Plug in Open tap Load Close door Add detergent

Note!
• Detergent only need to be added in "case I “after selecting pre-washing for
machines with this function.

2. Washing
1 2 3 4

Power On Select Programme Select function or Start up

default
Note!
• 1.If default is selected, step 3 can be skipped.
2.The function button line chart is for reference only, please refer to real product
as standard.

3. After Washing
Buzzer beep or “End” on display.

11
10
OPERATIONS

Before Each Washing

• The working condition of the washer should be(0-40)°C.If used under 0°C,the
inlet valve and draining system may be damaged. If the machine is placed under
condition of 0°C or less, then it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose are not frozen
before use.
• Please check the labels and the explanation of using detergent before wash. Use
non-foaming or less-foaming detergent suitable for machine washing properly.

Check the label Take out the items out of Knot the long strips,zip or
the pockets button

Put small clothes into the Turn easy-pilling and Separate clothes with
pillow slip long-pile fabric inside out different textures

！ Warning!
• When washing a single clothes, it may easily cause great eccentricity and give
alarm due to great unbalance. Therefore it is suggested to add one or two
more clothes to be washed together so that draining can be done smoothly.
• Don’t washing the clothes touching with kerosene, gasoline, alcohol and
other flammable materials.

10
12
OPERATIONS
Detergent Dispenser
I Pre wash detergent
II Main wash detergent
Softener

Dam-board Dam-board

Liquid detergent Powder detergent Pull out the dispenser

Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.

Model:AU(3)-FC75-S14/C1401E/MFC100-U1401B/C14E-AU(35)MFC75-S1403/C19E-AU(3)/
MFC90-U1603B/C19E-AU(35)

Programme Programme
Cotton Rinse&Spin
Synthetic Wool
Baby Care Delicate
Jeans Quick(Quick15')
Mix Rapid 45'
Colors Sport Wear
Drain Only Hand Wash
Spin Only Cotton ECO

Means must ○ Means optional

10
13
OPERATIONS
Model:MFC100-U1407B/C19E-AU(35)

Programme Programme
Cotton Drain Only
Cotton ECO Spin Only
Hand Wash Delicate
Jeans Quick 15'
Colors Rapid 45'
Mix Baby Care
Wool Synthetic
Rinse&Spin

Means must ○ Means optional

Note!
• As for the agglomerated or ropy detergent or additive, before they are
poured into the detergent box, it is suggested to use some water for
dilution to prevent the inlet of detergent box from being blocked and
overflowing while filling water.
• Please choose suitable type of detergent for the various washing
temperature to get the best washing performance with less water and
energy consumption.

10
14
OPERATIONS

Control Panel
Model:360279

1200 to

4 5 3 12 11

Note!
• The chart is for reference only, Please refer to real product as standard.

11 On/Off 12 Start/Pause
Product is switched on or off. Press the button to start or pause the
washing cycle.
3 Option 4 Programmes
This allows you to select an additional Available according to the laundry type.
function and will light when selected.
5 Display
The display shows the settings, estimated time remaining, options, and status messages
for your washer. The display will remain on through the cycle.

A B C D
A Delay B Door Lock

C Child Lock D Reload

E Pre Wash F Extra Rinse

1200 to
G Speed Wash H Spin Speed

I Rate Of Progress(Pre wash- Wash-

Rinse-Spin)
J Wash Time Delay Time

Speed Error End

J I H G F E

10
15
OPERATIONS
Option
Pre Wash
The Prewash function can get an extra wash before main wash,it is suitable for
washing the dust rises to surface of the clothes;You need to put detergent into
the Case (I) when select it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
Speed Wash
The function can decrease the washing time.
Anti-crease
It can be used to reduce the wrinkles of clothes.

Extra Wash
Very dirty clothes can choose it, select it can increase the washing time and
intensity to increase the washing effect.

Soil
It is suitable for different level of soil( from light to extra) .

Option Confirm
Confirm the selection of the Pre Wash,Extra Rinse,Extra Wash,Night Wash or
Anti-crease function.

Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time is 0-24 H.)
3.Press [Start/Pause] to commence the delay operation

Delay

On/Off Choose the Programme Setting time Start

Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting the programme. If the programme already started, should press the
[On/Off] button to reset the programme.
Caution!
• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is
restarted, press the [ On/Off ] button the program will continues.

10
16
OPERATIONS
Model:360279

Programme Option Programme Option

Delay Speed Extra Pre Anti- Extra Delay Speed Extra Pre Anti- Extra
wash rinse wash crease Wash wash rinse wash crease Wash
Cotton Rinse&Spin
Synthetic Wool
Baby Care Delicate
Jeans Quick
Mix Sport Wear
Colors Hand Wash
Drain Only Cotton ECO
Spin Only

○ Means optional

Other functions
My Cycle
Memory the frequently used programmes
Press [Spin]([Speed Wash]/[Temp.]) 3sec. to memory the running programme. The
default is cotton.

Temp.
Press the button to regulate the temperature(Cold,20℃, 30℃, 40℃,60℃,90℃)

10
17
OPERATIONS
Spin
Press the button to change the spin speed.
1400: 0-600-800-1000-1200-1400 1600: 0-400-800-1200-1400-1600
Model:360279

Programme Default Speed(rpm) Programme Default Speed(rpm)

1400 1600 1400 1600
Cotton 800 800 Rinse&Spin 1000 1200
Synthetic 800 800 Wool 600 800
Baby Care 800 800 Delicate 600 800
Jeans 800 800 Quick 800 800
Mix 800 800 Sport Wear 1200 1200
Colors 1000 1200 Hand Wash 600 800
Drain Only Cotton ECO 1400 1600
Spin Only 1000 1200

Caution!
• When the lights of spin speed (600,800,1000,1200,1400) are off means
the spin speed is 0.

10
18
OPERATIONS
Mute the buzzer

Temp. Spin

On/Off Start Press the [Temp.]&[Spin] button for 3sec.

the buzzer is mute.
To act the buzzer function, press the two buttons again for 3 seconds. The setting
will be kept until the next reset.
Caution!
• After Mu ting the buzzer function, the sounds will not be activated any more.

Reload
This operation can be executed during the washing progress. When the drum is
still rolling and there is large amount of water with high temperature in the drum.
The state is unsafe and the door cannot be opened forcefully. To press
[Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway
function. Please follow the steps as bellow:
1.Wait until the drum stops rotation.
2.The door lock is unlocked.
3.Close the door when the clothes are reloaded and press the [Start/Pause]
button.

Clothes

P ress[Start/Pause] 3s ec. Reload the clothes Start

Caution!
• Don't use the Reload function when the water level over the edge of the
inner tub or the temperature is higher.

Child Lock
To avoid mis operation by children.
Extra Pre
Function Select
Rinse Wash

On/Off Start Press [Extra Rinse] Press [Function]

and [Pre Wash] and [Select]
3 sec. till buzzer 3 sec. till buzzer
beep beep

10
19
OPERATIONS

Caution!
• Press the two button 3sec. also to be released the function.
• The “Child Lock” will lock all buttons except [ On/Off ].
• Cut off the power supply , the kid’s protection is to be released.
• The child lock will remain effective when the power is resumed for some models.

Programmes
Programmes are available according to the laundry type.
Programmes
Cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Synthetic Wash synthetic articles, for example: shirts, coats, blending.
While washing the knitting textiles, detergent quantity shall be
reduced due to its loose string construction and easily forming
bubbles.
Baby Care Washing the baby’s clothes, it can make the baby's wear cleaner
and make the rinse performance better to protect the baby skin.
Jeans Specially for jeans.
Mix Mixed load consisting of textiles made of cotton and synthetics.
Colors Washing brightly colored clothes, it can protect the colors better .
Cotton Eco To increase the washing effects, washing time is increased.
As for few light dirty clothes, the default temperature of washing
Hand Wash is cold.
Sport Wear Washing the activewear.
Quick(Quick15') Extra short programme approx , suitable for lightly soiled
washing as a small amounts of laundry .
For delicate , washable textiles , e . g . made of silk , satin , synthetic
Delicate
fibres or blended fabrics.
Wool Hand or machine - washable wool or richwool textiles . Especially
gentle wash programme to prevent shrinkage , longer
programme pauses ( textiles rest in wash liquor ).
Spin Only Extra spin with selectable spin speed .
Rinse&Spin Extra rinse with spin .
Drain Only Drain off the water.
Rapid45' Washing few and not very dirty clothes quickly.

Note!
• Reference to your product to select the programmes.

20
OPERATIONS

Washing Programmes Table

Model:360279

Programme Load(kg) Temp.(°C) Default Time

7.5(C01)
7.5 Default
1400
Cotton 7.5 40 2:40
Synthetic 3.75 40 1:40
Baby Care 7.5 30 1:20
Jeans 7.5 60 1:45
Mix 7.5 40 1:13
Colors 3.75 Cold 1:10
Drain Only 0:01
Spin Only 7.5 0:12
Rinse&Spin 7.5 0:20
Wool 2.0 40 1:07
Delicate 2.5 30 0:50
Quick 2.0 Cold 0:15
Sport Wear 3.75 40 0:45
Hand Wash 2.0 Cold 1:00
Cotton ECO 7.5 60 5:00

• Energy test program: Cotton ECO.

Speed: the highest speed; Other as the default.
Half load for 7.5Kg machine:3.75Kg.
• “Cotton ECO” is the standard washing programs to which the information
in the label and the fiche relates, and they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes in terms of combined
energy and water consumptions for washing that type of cotton laundry,that the
actual watertemperature may differ from the declared cycle temperature.

Note!
• The parameters in this table are only for user's reference. The actual parameters
maybe different with the parameters in above mentioned table.

10
21
MAINTENANCES

Cleaning And Care

！ Warning!
• Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet

Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.

Note!
• Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol, solvents or chemical products,etc.

Cleaning The Drum

The rusts left inside the drum by the metal articles shall be removed immediately
with chlorine-free detergents.
Never use steel wool.
Note!
• Don’t put laundry in the washing machine during the drum cleaning.

Cleaning The Door Seal And Glass

Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it
can cause leaks.
Remove any coins, buttons and other objects
from the seal after each wash.

10
22
MAINTENANCES
Cleaning The Inlet Filter
Note!
• Inlet filter must be cleaned if there is less water.

Washing the filter in the tap

1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the water supply hose.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use the brush to clean the filter.
4.Reconnect the inlet pipe.

Note!
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.

Clean The Detergent Dispenser

1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.

1 2 3 4

Pull out the dispenser Clean the dispenser Clean inside the recess Insert the dispenser
drawer with press the A drawer under water with an old toothbrush drawer

Note!
• Do not use alcohol,solvents or chemical products to clean the machine.

10
23
MAINTENANCES
Cleaning The Drain Pump Filter
！ Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.

1 2 3

Emergency
drain hose

Open the lower cover cap Rotate 90°C and pull out After water runs out,reset
the emergency drain hose, the drain hose
and take off the hose cap

4 5 6

Open the filter by turning Remove extraneous matter Close the lower cover cap
to the counter clockwise

Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.

10
22
24
MAINTENANCES

Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.

Description Reason Solution

Washing machine Restart after the door is closed
Door is not closed properly
cannot start up Check if the clothes is stuck
Door can’t be Washer's safety Disconnect the power, restart
opened protection design is working the product
The connection between inlet Check and fasten water pipes
Water leakage
pipe or outlet hose is not tight Clean up outlet hose
Detergent residues Detergent is dampened Clean and wipe the detergent
in the box or agglomerated box
Indicator or display Disconnect the power Check if the power is shut
does not light PC board or harness has down and the power plug is
connection problem connected correctly
Check if the fixing (bolts) have
Abnormal noise been removed
Check it’s installed on a solid
and level floor

Description Reason Solution

Restart after the door is closed
Door is not closed properly
Check if the clothes is stuck
Water injecting Check if the water pressure is
problem while too low
washing Straighten the water pipe
Check if the inlet valve filter is blocked
Overtime water draining Check if the drain hose is blocked

Water overflow Restart the washer

Please try again first, call up
Others service line if there are still
troubles
Note!
• After the check, activate the appliance. If the problem occurs or the display
shows other alarm codes again, contact the service.

10
25
MAINTENANCES

Technical Specifications
Power Supply 220-240V~,50Hz

850m m
MAX.Current 10A

Standard Water Pressure 0.05MPa~1MPa

59 5m m D

Model Washing Capacity Dimension Net Weight Rated Power

(W*D*Hmm)
360279 7.5kg 595*565*850 68kg 2000W

26
10
24
MAINTENANCES

Testing methods
Model:360279
ADDITIONAL INFORMATION FOR Standard performance TESTING:(AS/NZS 2040.1:2005+
Amdt1-2007+Amdt2-2009)
1. Water connections:Cold & hot water connection
2. Water supply pressure: 320 kPa
3. Warm wash Program: Cotton Eco 60℃ Display: 5:00
Cold wash program: Cotton Cold( no temperature display is cold wash)
4. Detergent type: Drum detergent
5. Detergent quantity: Default
6. Adding detergent:
The detergent is dissolved and added as Paragraph B7.3 of AS/NZS 2040.1
The detergent shall be dissolved in 1 L of water
7. Anti-sudsing agent: Max
8. Test load mass: 7.5kg
9. Water consumption: 77L
10.Test Voltage:220-240V~,50Hz

10
27
MAINTENANCES
MFC100-U1407B/C19E-AU(35)
ADDITIONAL INFORMATION FOR Standard performance TESTING:
(AS/NZS 2040.1:2005+Amdt1-2007+Amdt2-2009)
1. Water connections:Cold & hot water connection
2. Water supply pressure: 320 kPa
3. Warm wash Program: Cotton Eco Display: 4:54
Cold wash program: Cotton Cold( no temperature display is cold wash)
4. Detergent type: Drum detergent
5. Detergent quantity: Default
6. Adding detergent:
The detergent is dissolved and added as Paragraph B7.3 of AS/NZS 2040.1
The detergent shall be dissolved in 1 L of water
7. Anti-sudsing agent: Max
8. Test load mass: 10kg
9. Water consumption: 100L
10.Test Voltage:220-240V~,50Hz

10
28