i
Product Specification i
Integral M.2 SATA III 22x80
2020 Model
128 256 512 1TB 2TB
GB GB GB 1024GB 2048GB
• Shock resistance - No moving parts enable the product to be
The Integral M.2 next generation form factor used in tougher conditions
SATA III SSD delivers all of the advantages of flash
memory technology for SATA based computers. • Silent operation - Noiseless and low heat dissipation
M.2 SATA SSD storage solutions are designed for • Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting
Notebooks, Desktops, Ultrabooks and tablets. Technology
They address the need for more low powered • Supports TRIM
compact storage without compromising
• RoHS compliant
performance and reliability of solid state drives.
• UKCA, CE and FCC tested
FEATURES • 3 Year Warranty or TBW - whichever is earlier applies
• M.2 2280 form factor with SATA III 6Gbps interface (backwards
compatible with SATA 3Gbps and SATA 1.5Gbps)
• Supports ‘M’ & ‘B’ Key sockets
•
Performance: Faster boot than HDD, Faster access to
applications, enhanced productivity and increased efficiency
• Fully compatible with devices and OS that support the SATA
standard with M.2 M and B socket
• Non-volatile Flash Memory for outstanding data retention -
Less likely to fail than HDD
•
Ultra-efficient Block Management and Static and Dynamic
Wear Leveling
• Lower Power Consumption
Rev:4
i
Product Specification i
FORM FACTOR & INTERFACE CAPACITY PART CODE BARCODE (EAN)
Form Factor M.2 22 X 80 128GB INSSD128GM280 5055288444867
SATA III 6GBPS. ALSO COMPATIBLE WITH SATA II 3GBPS. ALSO 256GB INSSD256GM280 5055288444874
Interface COMPATIBLE WITH SATA 1.5GBPS
512GB INSSD512GM280 5055288444881
Compliance SATA Revision 3.2
1TB - 1024GB INSSD1TM280 5055288444898
NAND TLC
2TB - 2048GB INSSD2TM280 5055288439887
Controller Silicon Motion SM2258XT
WARRANTY
PERFORMANCE
3 years or TBW - whichever is earlier applies
Sequential Speed*
Capacity
Read Write Notes:
128GB 480 400 Actual performance may vary and depends on use conditions, host and environment. Based on
internal testing.
256GB 500 400 Sequential R/W is measured using ATTO.
512GB 520 450 IOPS measured in IOmeter.
1TB - 1024GB 520 450 Mean Time Between Failures is estimated based on JEDEC-218/219 standard methodology.
2TB - 2048GB 520 450 TBW is a measurement of SSDs expected lifespan, which represents the amount of data written
to the device. This is only an estimate and can differ based on user usage behaviour, platform and
*SEQUENTIAL SPEED (UP TO)* MBS estimates provided by the flash vendor.
Power Consumption may differ according to flash configuration and platform.
POWER CONSUMPTION
Humidity test was for 4 hours.
Capacity Power Management (Volt) Unless otherwise agreed in writing, Integral does not recommend nor warrant products for use in
life support, nuclear, medical, military, transportation, automotive, aviation, aerospace industry or
128GB 3.3
other applications where in a failure or defect of the product may threaten life, injury, health, loss
256GB 3.3 of a significant amount of money (“”Critical Use””), and the customer and user hereby assumes
all risk of any critical use of the product.
512GB 3.3 Mean Time Between Failures is estimated based on JEDEC-218/219 standard methodology.
1TB - 1024GB 3.3 For products with security software or hardware; the product cannot be guaranteed to be fully
secure. No security system can be considered absolute. This device should not be used as your
2TB - 2048GB 3.3 sole backup.
Product design and specification subject to change or modification without notice. E&OE.
All trademarks acknowledged.
For warranty information please visit www.integralmemory.com/warranty
ENVIRONMENTAL
Operating Temperature 0° to +70°C All Specifications are subject to change without notice 1GB = 1,000,000,000 Bytes,
1TB = 1,000,000,000,000 Bytes; 1 sector = 512 Bytes. The total usable capacity of the SSD may
Non-operating Temperature -40° to +85°C
be less than the total physical capacity because a small portion of the capacity is used for NAND
Humidity RH 90% under 40°C (operational) flash management and maintenance purposes.
3 year warranty or TBW - whichever is earlier applies.
FEATURES For warranty information please visit www.integralmemory.com/warranty
Supports SMART Software YES
Supports TRIM Yes (OS support required)
ECC Scheme Proprietry Solution
MTBF >1.5 Million Hours
128GB = 60
256GB = 120
TBW 512GB = 240
1TB - 1024GB = 480
2TB - 2048GB = 960
Compliancy CE, FCC, RoHS
UNPACKAGED DIMENSION
Length mm 80
Width mm 22
Height mm 2.25
Weight (g) 6
PACKAGED DIMENSION
Length mm 120
Width mm 64
Height mm 8
Weight (g) 15
Rev:4
i
Product Specification i
Rev:4
