Scribd
Upload
9 views2 pages

4 00 00 Airworthiness Limitations

The Model S550 Maintenance Manual outlines mandatory replacement times and inspection intervals for life-limited components and structures. It includes sections on Inspection Time Limits and Replacement Time Limits, which specify required inspections and service life for components. This chapter is FAA approved and complies with relevant Federal Aviation Regulations.

Uploaded by

LUCIENE ORECCHIO VIEIRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views2 pages

4 00 00 Airworthiness Limitations

The Model S550 Maintenance Manual outlines mandatory replacement times and inspection intervals for life-limited components and structures. It includes sections on Inspection Time Limits and Replacement Time Limits, which specify required inspections and service life for components. This chapter is FAA approved and complies with relevant Federal Aviation Regulations.

Uploaded by

LUCIENE ORECCHIO VIEIRA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Maintenance Manual

MODEL S550

COPYRIGHT © 1984
TEXTRON AVIATION INC.
WICHITA, KANSAS, USA 2 JULY 1984
S55MM22 REVISION 22 1 NOVEMBER 2024
Model S550 Maintenance Manual (Rev 22)
4-00-00 (Rev 6)

AIRWORTHINESS LIMITATIONS
1. Scope
A. This chapter outlines the mandatory replacement times and inspection intervals for components and airplane structures
considered to be life limited, or to require monitoring through scheduled inspections. This chapter applies to items such as
fatigue components and structures which are considered a part of the certification process.
NOTE: The Airworthiness Limitations section is FAA Approved and specifies inspection and maintenance
required under Parts 43.16 and 91.409 of the Federal Aviation Regulations, unless an alternative
program has been FAA approved.
2. Definition
A. This chapter contains additional sections as outlined below:
(1) Inspection Time Limits (4-10-00) give the systems and components that are required to be inspected at specified
intervals. The intervals specified represent the maximum time allowable between inspections.
(2) Replacement Time Limits (4-11-00) give the life-limited components that are to be replaced at a specific time or that have
a service life.

Copyright © Textron Aviation Inc. Page 1 of 1


Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Wed May 28 13:45:34 CDT 2025

You might also like