Scribd
Upload
13 views1 page

BR Seal (23-06-2025) 1

The crimping measuring sheet provides detailed measurements for a wire with 19 strands and a metal thickness of 0.320 mm. Most measurements, including crimp height and width, burr height and width, and support angle, meet the specified criteria, while measurable crimp width and support height do not. The document also includes operator information and a timestamp for the measurements taken.

Uploaded by

Parani Tharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views1 page

BR Seal (23-06-2025) 1

The crimping measuring sheet provides detailed measurements for a wire with 19 strands and a metal thickness of 0.320 mm. Most measurements, including crimp height and width, burr height and width, and support angle, meet the specified criteria, while measurable crimp width and support height do not. The document also includes operator information and a timestamp for the measurements taken.

Uploaded by

Parani Tharan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CRIMPING MEASURING SHEET

CRIMPING PROFILE

Wire ID : 0.50 R_WIRE_DESCRIPTION :

Terminal ID : Terminal Description :


Total Strands : 19
Applicator ID :
Applicator Description : Metal Thickness : 0.320 mm

Target Pull Force : Pull Force :

Name Value Result Criteria


Strands Count Total : 19 GOOD X >= 1.00 x C

Crimp Height : 1.206 mm GOOD 1.180 +0.050/-0.050 mm

Crimp Width : 1.860 mm GOOD 1.890 +0.100/-0.100 mm

Measurable Crimp Width : 1.878 mm BAD 1.00 x R <= X <= 1.10 x R

Burr Height : 0.138 mm GOOD X <= 1.00 x S

Burr Width : 0.115 mm GOOD X <= 0.50 x S

Base Thickness : 0.354 mm GOOD X >= 0.75 x S

Support Angle : 22.267 ° GOOD X <= 30.00 Deg

Support Height : 0.036 mm BAD X >= 0.5 x S

Face End Clearance : 0.581 mm GOOD X >= 0.50 x S

Wing Dissymmetry : 0.045 mm GOOD X <= 1.00 x S

Compression Ratio : 78.59 %

Section Reduction Rate : 21.41 % GOOD X >= 15.00 %

Operator : DATE_TIME : 23-06-2025 17:09:26

Order Number :

You might also like