Scribd
Upload
10 views2 pages

DC Reg Power Supply Abvolt 0-160V 5A

The Abvolt Model SVL160005 is a digital DC regulated power supply with an output voltage range of 0 to 160V and a current range of 0 to 5A. It features constant voltage and constant current modes, along with overload and short circuit protection, and displays output values on a dual 3-digit LED display. The device is designed for laboratory and industrial use, offering precise regulation and a compact, rugged design.

Uploaded by

ilesh shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views2 pages

DC Reg Power Supply Abvolt 0-160V 5A

The Abvolt Model SVL160005 is a digital DC regulated power supply with an output voltage range of 0 to 160V and a current range of 0 to 5A. It features constant voltage and constant current modes, along with overload and short circuit protection, and displays output values on a dual 3-digit LED display. The device is designed for laboratory and industrial use, offering precise regulation and a compact, rugged design.

Uploaded by

ilesh shah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Page 1 of 2

Digital DC Regulated Power Supply


(0 to 160V / 0 to 5A)

ABVOLT Model SVL160005

Abvolt offers a large range of DC Regulated Power Supplies for use in Laboratories &
Industries. Output voltage and current values are displayed on a 3 digit DPMs. All the models
operate in either constant voltage or constant current mode and are fully protected against
continuous output short circuit and overload.

 CV / CC type with very good regulation


 Separate Coarse & Fine Controls for
Voltage & Current
 Two 7-segment 3digit LED Display for
Voltage & Current
 Compact & Rugged Design for continuous
Use

Specifications

Output Voltage : 0 to 160V DC

Output Current : 0 to 5 A DC

Mode of Operation : a. Constant Voltage (CV)


b. Constant Current (CC)

Indicators : CV / CC LED's

Controls : Coarse & Fine Controls for Voltage & Current

Output Polarity : Floating w.r.t. ground

Protection : Over Load & Short Circuit protection with Automatic Cross Over

Constant Voltage Mode

Line Regulation : ± 0.05% +/- 5mV for mains variation of 230 V +/- 10 %

Load Regulation : ± 0.05% +/- 5mV from No Load to Full Load


Page 2 of 2

Ripple & Noise : 1mV rms max.

Constant Current Mode

Line Regulation : ± 0.1% ±250μA for mains variation of 230 V +/- 10 %

Load Regulation : ± 0.1% ±250μA for change in output voltage from zero Volts to
maximum output voltage

Ripple & Noise : 0.05% rms

Metering
Voltage : 7-segment 3digit LED Display
Current : 7-segment 3digit LED Display

Meter Accuracy : ±3 counts

Operating Temperature: 0 to 50 deg C

Line Voltage : 230V AC ±10% 50Hz, single phase

Output Terminals : BTI 15 type terminals

Note : Regulation to be measured at Sense Terminals

Options: Other models with different / various power capacities & facilities are available

All Specifications & appearances are subject to change without prior notice

You might also like