Atlas Copco Service
COP 1800HD+ series
9851 3219 01. 04/2013 © Copyright 2013, Atlas Copco Rock Drills AB, Örebro, Sweden. Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings. llustrations and photos in this brochure may show equipment with optional extras.
Specifications and equipment subjects to change without notice. Consult your Atlas Copco Customer Center for specific information.
Superior durability for mining and construction
• High speed rock drill for high penetration rates
• Hole range 38 - 64 mm (1½” - 2½”)
The COP 1800HD+ series was created to provide our customers A powerful, stepless variable and reversible rotation motor
with increased service intervals. The + series has recommended gives high torque for efficient drilling, and minimizes the risk for
service intervals increased by 50 percent, giving higher machine jamming.
utilization and reduced running costs. The + series contains the
same reliable performance as the COP 1800HD+ series. The COP 1800HD+ series contains three power outputs to
ensure that the rock drill best meets drilling requirements (COP
These specific COP 1800HD+ products are created for the 1638HD+, COP 1838HD+ and COP 2238HD+).
drilling requirements of mining and construction. The modified
heavy duty front head design makes this rock drill optimal for The modified heavy-duty front head design makes this rock drill
face drilling. optimal for face drilling.
The low profile of the COP 1800HD+ series permits drilling
close to walls with only 2 degrees of lookout angle.
www.atlascopco.com
Built for excellent penetration Flushing flow and pressure
The COP 1800HD+ series is efficient, with a dual-dampening The separate lubrication of front head and driver together with COP 1638HD+/COP 1838HD+/COP 2238HD+
system to dissipate shockwaves away from the rock, and pressurized and lubricated mating surfaces and sidebolts ensures
establishing the best possible contact between the drill bit and the best protection against wear and corrosion. With three Flushing water pressure (maximum) 25 bar (362.6 psi)
the rock allowing for it to be possible to transmit maximum accumulators to level out pressure peaks in the system, hydraulic
power for crushing, while keeping the drill string threads tightly components are ensured maximum component life. Lubricating air consution at 2 bar (29 psi) 5 l/s (10.6 cfm)
secured. Flushing water consumption* 40 - 120 l/min (1.4 - 4.3 cfm)
* Flushing water consumption depends strongly upon hole diamater, bit type, drill rod size and rock hardness. The figures above are typical values for spherical button bits in
The COP 1800HD+ series was also designed to maximize the life granite 200 Mpa (36,250 psi)
of the drill steel, and the impact piston design matches the size
of the drill steel.
Kits
Dimensions and weight COP 1638HD+ COP 1838HD+ COP 2238HD+
COP 1638HD+/COP 1838HD+/COP 2238HD+ Seal set kit 3115 9170 93 3115 9170 91 3115 9170 94
Minor preventative maintenance 3115 9238 98 3115 9238 93 3115 9241 90
Weight 175 kg kit
(386 lb)
Major preventative maintenance 3115 9238 99 3115 9238 94 3115 9241 91
Length without shank adapter 1008 mm kit
(3 ft 3.6 inch)
Width including connectors 251 mm
(9.9 inch)
Shank adapters
Height 223 mm
(8.8 inch)
COP 1638HD+/COP 1838HD+/COP 2238HD+ COP 1638HD+/COP 1838HD+/COP 2238HD+
Height over drill center 88 mm Drifting FOR EXTENSION DRILLING
(3.5 inch)
R32 403 - 09101,10 403 - 09103,10
R38 404 - 09101,10 404 - 09103,10
Rotation motors
T38 435 - 09101,10 435 - 09103,10
COP 1638HD+/COP 1838HD+/COP 2238HD+ Magnum SR38 427 - 09101,10 427 - 09103,10
Type 07 (160 cc) 05 (100 cc) 06 (125 cc)
Rotation range 0 - 215 rpm 0 - 340 rpm 0 - 275 rpm Graph
Torque 1000 Nm 640 Nm 820 Nm
(maximum) (737 lbf - ft) (472 lbf - ft) (605 lbf - ft)
Working pressure 210 bar 210 bar 210 bar
(maximum) (3046 psi) (3046 psi) (3046 psi)
Oil consumption 75 l/min 75 l/min 75 l/min 6
(2.6 cfm) (2.6 cfm) (2.6 cfm)
Penetration rate (m/mn)*
5
4 Limestone 160 MPa
Impact ratings 3
COP 1638HD+ COP 1838HD+ COP 2238HD+ 1 Granite 200 MPa
Impact power 16 kW 18 kW 22 kW 40 50 60 70
(maximum) (21.5 hp) (24 hp) (29.5 hp)
Hole dimension (Ø mm)
Input power to rock drill 25 kW 31 kW 37 kW
(maximum) (33.5 hp) (41.6 hp) (49.6 hp)
COP 1638HD+ COP 1838HD+ COP 2238HD+
Hydraulic pressure 200 bar 230 bar 250 bar
(maximum) (2900 psi) (3336 psi) (3626 psi)
Flow rate 60 - 77 l/min 75 - 92 l/min 83 - 93 l/min *Penetration rates shown were achieved in a laboratory setting, actual penetration
(2 - 2.7 cfm) (2.6 - 3.2cfm) (2.9 - 3.3 cfm) rates will vary pending rock and environmental conditions.
Impact frequency 60 Hz 60 Hz 73 Hz
