ver1 2015

ENVIRONMENTAL PRODUCT DECLARATION

in accordance with ISO 14025, ISO 21930 and EN 15804

Owner of the declaration: Jotun A/S

Program operator: The Norwegian EPD Foundation
Publisher: The Norwegian EPD Foundation
Declaration number: NEPD-3845-2801-EN
Registration number: NEPD-3845-2801-EN
ECO Platform reference number: -
Issue date: 26.10.2022
Valid to: 26.10.2027

Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

Jotun A/S

www.epd-norge.no

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

1/8
General information
Product: Owner of the declaration:
Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)
Jotun A/S
Contact person: Cleo Alves Otterbech
Phone: +47 33 45 70 00
e-mail: [email protected]

Program operator: Manufacturer:

Jotun U.A.E. Ltd. (L.L.C.)
The Norwegian EPD Foundation
Pb. 5250 Majorstuen, 0303 Oslo
Phone: +47 23 08 80 00
e-mail: [email protected]

Declaration number: Place of production:

Jotun U.A.E. Ltd. (L.L.C.)
NEPD-3845-2801-EN Near Old National Taxi depot, Street 17A, Al Quoz Industrial Area 2 Dubai
United Arab Emirates

ECO Platform reference number: Management system:

ISO 9001:2008 Certificate nr: 0044915-00, ISO 14001:2004 Certificate nr 0044914-
00, ISO 45001: 2018 Certificate nr: 0098139

This declaration is based on Product Category Rules: Organisation no:

CEN Standard EN 15804:2012+A1:2013 serves as core PCR. 923 248 579

IBU PCR Part B for coatings with organic binders

Statement of liability: Issue date: 26.10.2022

The owner of the declaration shall be liable for the underlying information and
evidence. EPD Norway shall not be liable with respect to manufacturer Valid to: 26.10.2027
information, life cycle assessment data and evidences.

Declared unit: Year of study:

1 kg Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.) 2022

Declared unit with option: Comparability:

EPD of construction products may not be comparable if they not comply with EN
A1,A2,A3
15804 and seen in a building context.

Functional unit: Author of the Life Cycle Assessment:

The declaration is developed using EPD tool lca.tools ver EPD2020.11, developed by
LCA.no AS
Approval:

Collected/registered by: Ragnhild Bjerkvik Alnes

Internal verification by: Cleo Alves Otterbech

Verification: Approved:

Independent verification of data, other environmental information and

the declaration according to ISO14025:2010, § 8.1.3 and § 8.1.4

External

Third party verifier:

Sign Sign

Senior Research Scientist, Anne Rønning

(Managing Director EPD-Norway)
(Independent verifier approved by EPD Norway)

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

2/8
Product
Product description: Technical data:
Fenomastic Emulsion Primer is a high performance emulsion primer, Specific gravity: 1.3
designed for interior purposes. It is based on alkali resistant acrylic Solids by volume: 25 ± 2 volume%
emulsion.
Film thickness per coat:
The declared product has excellent penetration into the substrate there Dry film thickness: 27 - 35 µm
by providing the best adhesion. It offers best protection against alkali Wet film thickness: 108 - 140 µm
attack. It has low VOC which ensures good indoor air quality. It offers
good flow, hiding power and in-can anti-bacterial properties. It is Free Theoretical spreading rate: 9 - 7 m²/l
from APEO and formaldehyde, and heavy metals have not been used as
active ingredients. The most representative and worst case formulation produced at the
manufacturing site is chosen for this EPD. For products with a selection
Fenomastic Emulsion Primer is ideal for priming interior surfaces. of colours, this will be the formulation with the highest content of
titanium dioxide.

Product specification The product packaging is based on an average sized metal packaging,
For information on Green Building Standard credits, see "Additional including secondary packaging such as pallets and plastic wrapping.
Information" on page 4.
For safety, health and environmental conditions, see the Safety Data
The material composition of the declared mixed product is given below: Sheet for the declared product on www.jotun.com.
Materials %
For information on technical data, application and use of the product,
Water 50 - 75 see the Technical Data Sheet for the declared product on www.jotun.com.
Filler 25 - 50
Market:
Binder 3-5
Additive 1-3 Global. Transport to market is not included in this EPD.
Solvent 1-3
Reference service life, product
Titanium dioxide 1-3 The reference service life of the product is highly dependent on the
Biocide <0.1 conditions of use.

Estimated service life, object

The coated object is not declared.

LCA: Calculation rules

Declared unit: Allocation:
The allocation is made in accordance with the provisions of EN 15804.
1 kg Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)
Incoming energy, water and waste production in-house is primarily
Cut-off criteria: allocated equally among all products through mass allocation. Specific
All major raw materials and essential energy is included. The production allocation was performed for certain waste flows according to information
process for raw materials and energy flows with very small amounts (less provided by the site manager. VOC emissions have been allocated
than 0.1 % dry matter) are not included. In total, more than 99% of the entirely to the production of solvent based paints. Effects of primary
material input is included. These cut-off criteria do not apply for non- production of recycled materials is allocated to the main product in
energy related emissions (such as wastes, hazardous materials and which the material was used. The recycling process and transportation of
substances). the material is allocated to this analysis.

Data quality:
The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided
by the manufacturer and represents the production of the declared product. Production site data was collected in 2015. Representative data from ecoinvent
v3.2 was used for other processes. The data quality for the material input in A1 is presented in tabular form.
Materials Source Data quality Year
Additives CEPE RM Database v3.0 Database 2016
Binders and Resins CEPE RM Database v3.0 Database 2016
Others CEPE RM Database v3.0 Database 2016
Pigments and Fillers CEPE RM Database v3.0 Database 2016
Solvents CEPE RM Database v3.0 Database 2016
Packaging Østfoldforskning Database 2017

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

3/8
System boundary:
The flowchart in the figure below illustrates the system boundaries for the analysis, in accordance with the modular principle on EN 15804. The analysis is a
cradle-to-gate (A1-A3) study.

Additional information:
The declared product contributes to Green Building Standard credits by meeting the following specific requirements:

LEED®v4.1 (2020)/LEED®v4 (2013)

EQ credit: Low-emitting materials.
- Dubai: VOC content for Primers - WB (30 g/l) (Green Building Regulations and Specifications in the Emirate of Dubai) and emission 0.5 mg/m³ or less (CDPH
method 1.2).
- VOC content for Primers, Sealers, and Undercoaters (100 g/l) (CARB(SCM)2020) and emission 0.5 mg/m³ or less (CDPH method 1.2).
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path - REACH optimization: Fully inventoried chemical
ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate
list.
- Environmental Product Declarations: Product-specific Type III EPD (ISO 14025;21930, EN 15804) for Jotun U.A.E. Ltd. (L.L.C.).

BREEAM® International (2021)/BREEAM® International (2016)

- Hea 02: VOC exemplary emission (CDPH method 1.2 (2017)) and the VOC content for Primers (15 g/l).
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804) for Jotun U.A.E. Ltd. (L.L.C.).

Additional certificates and approvals may be available on request.

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

4/8
LCA: Scenarios and additional technical information
The following information describe the scenarios in the different modules of the EPD.
This is a cradle to gate (A1-A3) EPD with no declared modules after the factory gate. Transport from place of production to user (A4) has to be calculated by
the user.

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

5/8
LCA: Results

System boundaries (X=included, MND=module not declared, MNR=module not relevant)

Construction Beyond the
Product stage installation User stage End of life stage . system
stage bondaries

Refurbishment
Manufacturing

Reuse-Recovery-
construction
Replacement
Maintenance

Operational

Operational

processing
demolition

Recycling-
Assembly

water use
Transport

Transport

Transport
materials

potential
Disposal
energy

W aste
Repair
Raw

use
Use

De-
A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 . D
X X X MND MND MND MND MND MND MND MND MND MND MND MND MND . MND

Environmental impact
Parameter Unit A1 A2 A3
GWP kg CO 2 -eq 1,06E+00 8,73E-03 9,11E-02
ODP kg CFC11 -eq 8,27E-08 1,59E-09 1,20E-08
POCP kg C2H4-eq 4,54E-04 4,47E-06 2,45E-05
AP kg SO 2 -eq 6,15E-03 1,36E-04 6,04E-04
EP kg PO 43- -eq 1,59E-03 1,61E-05 6,11E-05
ADPM kg Sb -eq 1,82E-05 6,50E-09 4,84E-08
ADPE MJ 1,40E+01 1,33E-01 1,39E+00
GWP Global warming potential; ODP Depletion potential of the stratospheric ozone layer; POCP Formation potential of tropospheric photochemical oxidants;
AP Acidification potential of land and water; EP Eutrophication potential; ADPM Abiotic depletion potential for non fossil resources; ADPE Abiotic depletion
potential for fossil resources
Reading example: 9,0 E-03 = 9,0*10-3 = 0,009
*INA Indicator Not Assessed

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

6/8
Resource use
Parameter Unit A1 A2 A3

RPEE MJ 2,00E+00 2,64E-03 4,22E-03

RPEM MJ 3,94E-01 5,68E-04 9,36E-04
TPE MJ 2,39E+00 3,21E-03 5,16E-03
NRPE MJ 1,53E+01 1,37E-01 1,40E+00
NRPM MJ 0,00E+00 0,00E+00 0,00E+00
TRPE MJ 1,53E+01 1,37E-01 1,40E+00
SM kg 0,00E+00 0,00E+00 0,00E+00
RSF MJ 0,00E+00 0,00E+00 0,00E+00
NRSF MJ 0,00E+00 0,00E+00 0,00E+00
W m3 1,40E-02 2,25E-05 2,25E-04

RPEE Renewable primary energy resources used as energy carrier; RPEM Renewable primary energy resources used as raw materials; TPE Total use of renewable
primary energy resources; NRPE Non renewable primary energy resources used as energy carrier; NRPM Non renewable primary energy resources used as
materials; TRPE Total use of non renewable primary energy resources; SM Use of secondary materials; RSF Use of renewable secondary fuels; NRSF Use of non
renewable secondary fuels; W Use of net fresh water
Reading example: 9,0 E-03 = 9,0*10-3 = 0,009
*INA Indicator Not Assessed

End of life - Waste

Parameter Unit A1 A2 A3
HW kg 2,53E-05 7,34E-08 5,85E-07
NHW kg 1,17E+00 5,05E-03 1,19E-02
RW kg INA* INA* INA*
HW Hazardous waste disposed; NHW Non hazardous waste disposed; RW Radioactive waste disposed
Reading example: 9,0 E-03 = 9,0*10-3 = 0,009
*INA Indicator Not Assessed

End of life - Output flow

Parameter Unit A1 A2 A3
CR kg 0,00E+00 0,00E+00 0,00E+00
MR kg 0,00E+00 0,00E+00 1,54E-03
MER kg 0,00E+00 0,00E+00 3,47E-03
EEE MJ INA* INA* INA*
ETE MJ INA* INA* INA*
CR Components for reuse; MR Materials for recycling; MER Materials for energy recovery; EEE Exported electric energy; ETE Exported thermal energy
Reading example: 9,0 E-03 = 9,0*10-3 = 0,009
*INA Indicator Not Assessed

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

7/8
Additional requirements

Greenhouse gas emissions from the use of electricity in the manufacturing phase
National production mix from import, low voltage (production of transmission lines, in addition to direct emissions and losses in grid) of applied electricity for
the manufacturing process (A3).
Electricity mix Data source Amount Unit
Electricity, United Arab Emirates (kWh) ecoinvent 3.3 Alloc Rec 1113,82 g CO2-ekv/kWh

Dangerous substances
The product contains no substances given by the REACH Candidate list.

Indoor environment
The declared product is emission tested by RISE Research Institutes of Sweden/SP Technical Research Institute of Sweden or Eurofins in accordance with California Department of
Public Health (CDPH) Standard Method v1.2–2017.

Bibliography
ISO 14025:2010 Environmental labels and declarations - Type III environmental declarations - Principles and procedures.
ISO 14044:2006 Environmental management - Life cycle assessment - Requirements and guidelines.
EN 15804:2012+A1:2013 Environmental product declaration - Core rules for the product category of construction products.
ISO 21930:2017 Sustainability in buildings and civil engineering works - Core rules for environmental product declarations of construction products.
IBU PCR Part B: Requirements on the EPD for Coatings with organic binders. v1.4, September 2016.
Vold et al (2017). EPD and LCA tool for Jotun - Technical description and background information, OR 01.17, Ostfold Research, Fredrikstad 2017.
CEPE v3.0 Raw materials LCI database for the European coatings and printing ink industries, May 2016.
ecoinvent v3.2 Alloc Rec, Swiss Centre of Life Cycle Inventories.

BREEAM International (2021): BREEAM International New Construction Technical Manual - SD250. Ver. 6.0 (2021).
BREEAM International (2016): BREEAM International New Construction Technical Manual - SD233. Ver. 2.0 (2017).
CARB SCM (2020): California Air Resources Board (CARB) Suggested Control Measure for Architectural Coatings.
CDPH method 1.2 (2017): Standard method for the testing and evaluation of volatile organic chemical emissions from indoor sources. California Department of Public Health.
Green Building Regulations and Specifications in the Emirate of Dubai (2015). RD-DP32-5104 (IC).
LEED®v4.1 (2020): LEED® v4.1 for Building design and construction, U.S. Green Building Council®.
LEED®v4 (2013): LEED® v4 for Building design and construction, U.S. Green Building Council®.
REACH (2006): Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006. REACH Authorization list – Annex XIV, the Restriction list –
Annex XVII and the SVHC candidate list.

Program operator and publisher Phone: +47 23 08 80 00

The Norwegian EPD Foundation e-mail: [email protected]
Post Box 5250 Majorstuen, 0303 Oslo,Norway web: www.epd-norge.no

Owner of the declaration Phone: +47 33 45 70 00

Jotun A/S e-mail: [email protected]
Hystadveien 167 3209 Sandefjord web: www.jotun.no

Author of the Life Cycle Assessment Phone: +47 69 35 11 00

Østfoldforskning AS e-mail: [email protected]
Stadion 4 1671 Kråkerøy web: www.ostfoldforskning.no

Developer of EPD generator Phone: +47 916 50 916

LCA.no AS e-mail: [email protected]
Dokka 1C 1671 Kråkerøy web: www.lca.no

NEPD-3845-2801-EN Fenomastic Emulsion Primer, Jotun U.A.E. Ltd. (L.L.C.)

8/8