Manifold mounted ball valves
KHP / KHP3K
Model code
(also order example) KHP3K 16 L 1114 06 X . . .
Designation
KHP = 2/2-way manifold mounted ball valve (DN 06 - 50)
KHP3K = 3/2- or 3/3-way manifold mounted ball valve (DN 06 - 50)
Nominal bore
(DN)
Ball bore (not applicable for KHP)
L
Materials
Housing, locking screw
1 = steel
3 = stainless steel
Ball, control spindle
1 = steel
3 = stainless steel
Ball seal
1 = POM (polyacetal)
Soft seal
PN up to 500 4 = FKM (Viton)
DN 06 - 50 (other materials on request)
Handle
09 = without handle
14 = zinc die-cast bolt-on handle, cranked, fitted DN 06
04 = zinc die-cast bolt-on handle, cranked DN 10
02 = aluminium clamped handle, cranked DN 16 - 25
06 = steel bolt-on handle, cranked DN 32 - 50
Series
(determined by manufacturer)
Special model
T-bore on request
SO 560 = sealing on inlet side, negative switching overlap, switch 90°
SO 560.1 = sealing on inlet side, positive switching overlap, switch 180°
TT = O-rings for low temperature, application range -40 °C to +80 °C
Bore Switch Function diagram SO no.
L 0° - 90° ––
EN 5.506.6/05.20
L (positive) 0° - 90° - 180° SO 560.1
109
Dimensions
KHP
Manifold mounted ball valve with cranked bolt-on steel handle
øD1
C
H2
L4 SW1 SW2
øD
B1
H1
B
S
L5 T L1
øD2 O-ring L2
øD3 L7
L6 L3
KHP3K
3-way manifold mounted ball valve with cranked clamped aluminium handle
D1
D
C
H2
L4 SW1 SW2
H
H1
B1
B
S
System pressure 2 1 3
L5 D2 O-ring L1
L2
L8
D3 L7
L6 L3
L
DN LW L L1 L2 L3 L4 L5 L6 L7 L8 B B1 SW1 A C
06 6 64 8.5 17.5 59 25 8.5 35 35 17.5 40 27 6 60 23
10 9.5 80 7.5 27.5 70 29 10 44 55 19 55 40 9 108 28
16 16 109.4 8.5 41.5 100 44 17 58 83 26.5 60 45 12 163 50
20 20 127 10 48.5 117 51 20 69 97 31 70 51 14 169 59
25 23.5 145 10 57.5 135 62 24 81 115 38 80 60 14 169 59
32 32 176 12 68 165 75 29 96 136 46 100 78 17 228 80
40 38 205 28.5 56 180 84.6 28.5 112 112 56.1 130 95 17 228 80
50 48 245 38 68 220 106 38 136 136 68 149 112 17 228 80
DN SW2 H H1 H2 D D1 D2 D3 T S O-ring Weight Weight Pressure range
KHP [kg] KHP3K [kg] PN [bar]
06 22 37.5 30 7 6.6 11 6 11.7 1.6 23.2 8x2 0.6 0.55 500
10 30 58 45 8.5 9 14 9.5 15 2 36 10x2.6 1.2 1.2 350
16 36 72.2 55 11 9 14 16 25 2 46 20.29x2.62 2.1 2 350
20 41 86.3 68.6 11.6 10.5 16.5 20 30 3 58.1 23.39x3.53 3.9 3.8 350
EN 5.506.6/05.20
25 50 96 78.4 11.6 10.5 17 23.5 35 3 67.4 28.17x3.53 5.7 5.6 350
32 65 116.2 98 12 13 19 32 39.4 2.9 83 32.92x3.53 10.9 10.8 350
40 – 117.5 100 12 17.5 26 38 48.4 2.9 82.5 42x3.5 17.5 – 350
50 – 127.5 110 12 22 33 48 55.4 2.9 88.5 49x3.5 24.5 – 350
110
Interface for (3-way) manifold mounted ball valve
required surface finish
of mounting plate
Dimensional tolerances
ISO 2768 m
* = bore 1 not applicable
for KHP
DN Y1 Y2 X1 X2 X3 X4 X5 X6 X7 d2 M Cheese-head screw Tightening
ISO 4762 torque MA
(property class) [Nm] *
06 13.5 27 17.5 35 0 35 35 17.5 17.5 6 M6 M6 - 10.9 13
10 20 40 27.5 55 2.5 46.5 44 21.5 19 9.5 M8 M8 - 10.9 30
16 22.5 45 41.5 83 8.5 66.5 58 35 26.5 16 M8 M8 - 12.9 35
20 25.5 51 48.5 97 10 79 69 41 31 20 M10 M10 - 12.9 60
25 30 60 57.5 115 14 95 81 52 38 23.5 M10 M10 - 12.9 60
32 39 78 68 136 17 113 96 63 46 32 M12 M12 - 12.9 110
40 47.5 95 56 112 0 112 112 56.1 56.1 38 M16 M16 - 12.9 300
50 56 112 68 136 0 136 136 68 68 48 M20 M20 - 12.9 600
* = standard values for friction coefficient µ 0.14
Notice: data and drawings relating to the installation space are available on request.
EN 5.506.6/05.20
111
Technical specifications
Mounting position: KHP:
No orientation restrictions
KHP3K:
when pressure is applied from port 2 or 3 to port 1, some leakage can be expected,
depending on the pressure.
Ambient temperature: -10 °C to +80 °C
Nominal pressure: up to PN 500 (see pressure range)
Operating fluids: Mineral oil to DIN 51524 Part 1 and Part 2 (other fluids on request)
Temperature of operating fluid: -10 °C to +80 °C
Spare parts: Seal kits available on request
Accessories: All ball valves can be supplied with the following options: Actuator
Limit controls
Lock
NOTE
The information in this brochure relates to the operating conditions and applications
HYDAC Accessories GmbH
described. For applications and operating conditions not described, please contact
Hirschbachstr. 2
the relevant technical department.
EN 5.506.6/05.20
66280 Sulzbach/Saar
The operator is always responsible for determining the product suitability for the Tel.: +49 (0)6897 - 509-01
specific application. Quantified values for product characteristics are average values Fax: +49 (0)6897 - 509-1009
for a new product that undergo a time deterioration process. Internet: www.hydac.com
Subject to technical modifications and errors. E-Mail: [email protected]
112
