Course Outcomes and CO-PO-PSO articulation Matrix

Batch: 2019-23
Semester-I/II
Subject: Basic Electrical Engineering Subject Code:18ELE13/23
Course Outcomes
CO1 Understand the basic concepts of DC and AC circuits and Solve the problems on circuits
CO2 Analysis of Single Phase and three phase AC Circuits
Apply the basic knowledge to obtain the desired parameters/performance characteristics of Transformer
CO3
and Electric Machines
CO4 Discuss types of domestic wiring with electrical safety Rules & standards
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2
CO2 3 2
CO3 3 2
CO4 3 2 2
Average 3 2 2 2

Subject: Basic Electrical Engineering Lab Subject Code:18ELEL17/27

Course Outcomes
Identify the common electrical components and measuring instruments used for conducting
CO1 experiments in the electrical laboratory.
CO2 Compare power factor of lamps
CO3 Determine impedance of an electrical circuit and power consumed in a 3-phase load.
CO4 Determine earth resistance and understand two way and three-way control of lamps
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 1 1
CO2 3 2 1 1 1
CO3 3 2 1 1 1
CO4 3 2 1 1 1

Average 3 2 1 1 1

Page 1 of 18
 Semester-III

Subject: Electric Circuit Analysis Subject Code:18EE32

Course Outcomes
CO1 Understand and apply the basic concepts and laws to analyze DC and AC networks
CO2 Apply network theorems to solve complex electric circuits
CO3 Analyze the resonant circuits and discuss transient analysis with Initial conditions
CO4 Synthesize waveforms using Laplace transformation
CO5 Analyze unbalanced three phase systems and also evaluate the performance of two port networks
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3
CO2 3 3 3
CO3 3 3 3
CO4 3 1 2
CO5 3 2 2
Average 3 2.4 2.6

Subject: Transformers and Generators Subject Code:18EE33

Course Outcomes
CO1 Understanding the construction and operation of transformers and autotransformer
CO2 Analyze the performance of transformer by various tests, phase conversion and parallel operation .

CO3 Analyze and explain the operation of the synchronous machine connected to infinite machine.
Analyze the performance of Synchronous machines by various tests, parallel operation and performance of
CO4 Synchronous machines on infinite bus
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 1 3 2
CO2 2 2 1 1 3 2
CO3 3 2 1 1 3 2
CO4 2 2 1 1 3 2
Average 2.2 2 1 1 3 2

Subject: Analog Electronic Circuits Subject Code:18EE34

Course Outcomes
CO1 Illustrate the construction and working of diodes, BJT and FET
Design and Analyse the different amplifiers, oscillators and signal conditioning circuits using
CO2
diodes, BJT and FET
CO3 Analysis of Transistor behavior at different frequencies
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 1 1 3
CO2 2 2 2 1 1 3
CO3 2 2 2 1 3
Average 2 1.66 1.66 1 1 3

Page 2 of 18
Subject: Digital System Design Subject Code:18EE35
Course Outcomes
Build a simplified equation using different reduction techniques, mealy/Moore models and state
CO1
diagrams
CO2 Design different sequential and combinational circuits
CO3 Explain the function of different sequential, combinational circuits and memory elements
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2
CO2 2 3 2
CO3 2 2 2 2
Average 2 2.7 2 2

Subject: Electrical and Electronic Measurements Subject Code:18EE36

Course Outcomes
Explain the working of various circuits and equipment's used for electrical parameters and components
CO1 measurements. Also explain working of recording and display devices
CO2 Analyze and exhibit process of adjustments and errors in electrical and electronics instruments
CO3 Formulate the techniques to extend range of electical and electronics instruments
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 3 2 3 1
CO2 2 3 3 3 1
CO3 2 1 1 2 1
Average 2 2.33 2 2.66 1

Subject: Electrical Machines Lab 1 Subject Code:18EEL37

Course Outcomes
Conduct different tests on transformers to evaluate the performance characteristics of the 1-phase
CO1
and 3-phase transformers.
CO2 Connect single phase transformers for three phase operation and phase conversion.
Compute the voltage regulation of synchronous generator using the test data obtained in the
CO3
laboratory and also evaluate the performance of synchronous generators from the test data.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 1 1 1 2 3
CO2 3 1 1 1 2 3
CO3 3 1 1 1 2 3
Average 3 1 1 1 2 3

Page 3 of 18
Subject: Electronics Laboratory Subject Code:18EEL38
Course Outcomes
Design and test rectifier circuit, BJT/FET amplifier, oscillator circuit, counters and sequence
CO1
generators.
Determine h-parameter models of transistor for all models and realize the code conversion
CO2
techniques
CO3 Demonstrate and realize Boolean expression, adders and subtractors using gates.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 1 1 1 2
CO2 2 2 2 1 1 1 2
CO3 2 2 2 1 1 1 2
Average 2 2 2 1 1 1 2

Semester-IV
Subject: Power Generation and Economics Subject Code:18EE42
Course Outcomes
Interpret the working of hydroelectric power plant and analyse the different turbine uses and
CO1
economic aspects of hydro generation.
Understand and explain the operation of different thermal plants and compare them w.r.t to
CO2
economic aspects.
Illustrate and infer the operation and importance of nuclear power plants and its benefits to
CO3
economy.
Understand and classify various substations,explaining the importance of grounding and power
CO4
factor improvement.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 3 2
CO2 2 2 2 3 2
CO3 2 2 2 2 2 2
CO4 2 2 2 2 2 2
Average 2 2 2 2 2.5 2

Subject: Transmission and Distribution Subject Code:18EE43

Course Outcomes
Explain transmission and distribution scheme, identify the importance of different transmission
CO1
systems and type of insulators
CO2 Analyse and compute the parameters of the transmission line for different configurations.
CO3 Assess the performance of overhead lines
CO4 Interpret corona, explain the use of underground cables
CO5 Classify different types of distribution systems; examine its quality & reliability
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
Page 4 of 18
 CO1 2 2 2 3
CO2 3 3 2 1 2 3
CO3 3 3 2 1 2 3
CO4 3 3 2 3
CO5 3 3 2 1 2 3
Average 2.8 2.8 2 1 2 3

Subject: Electric Motors Subject Code:18EE44

Course Outcomes
CO1 Explain the constructional features, classifications and operation of DC, AC & special Motors.
Analyze and assess the performance characteristics and speed control of DC motors by
CO2
conducting suitable tests.
Explain the constructional features of Three Phase and Single phase induction Motors and assess
CO3
their performance.
Explain the operation, speed control & starting methods of Synchronous motor and Induction
CO4
motors.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 2 2
CO2 3 2 2 2 3
CO3 3 2 2 2 3
CO4 3 2 2 2 3
Average 2.75 2 2 2 2.75

Subject: Electromagnetic Field Theory Subject Code:18EE45

Course Outcomes
Demonstrate the vector calculus and fundamental laws of physics to understand the electric and
CO1
magnetic field
Problem formulation and analysis of electromagnetic fields in the region surrounded by different
CO2 static and moving charge configuration.
Asses time varying fields and propagation of waves in different media also behaviour of electric
CO3
and magnetic field across a boundary.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 1
CO2 2 2 2 2 1
CO3 2 2 2 2 2
Average 2 2 2 2 1.33

Subject: Operational Amplifiers and LIC Subject Code:18EE46

Course Outcomes
CO1 Describe ideal and practical opamps and design amplifier circuits using opamps
Design and analyze Opamp Filters, oscillators, Signal processing and non linear circuits like
CO2
Schmitt triggers, comparators and converters
CO3 Analyse and employ voltage regulator circuits and Ics
CO4 Understand and explain PLL, VCO and timer circuits
Page 5 of 18
 CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 1 1 1 2
CO2 3 3 3 1 1 2
CO3 3 3 3 1 1 2
CO4 2 1 1 1 2
Average 2.5 2 2 1 1 1 2

Subject: Electrical Machines Lab 2 Subject Code:18EEL47

Course Outcomes
Demonstrate and understanding the performance of DC motors by conducting suitable
CO1
experiments.
Evaluate the performance of induction and synchronous motor by conducting suitable
CO2
experiments.
Compare and analyze the speed control techniques for single phase and three-phase induction
CO3
motors.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 1 1 2 3
CO2 3 2 1 1 1 2 3
CO3 3 2 1 1 1 2 3
Average 3 2 1 1 1 3 3

Subject: Op-amps and Linear ICs Lab Subject Code:18EEL48

Course Outcomes
Determine the characteristics of opamp and utilize it as linear circuit like amplifier, rectifier,
CO1
signal processing, oscillator and filters
To design and test opamp as non linear circuit like differentiator & integrator, ZCD, Schmitt
CO2
trigger and comparator
CO3 Design and study of linera Ics as multivibrator, power supplies, voltage regulator
CO4
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 1 1 1 2
CO2 3 2 1 1 1 1 2
CO3 3 2 1 1 1 1 2
CO4
Average 3 2 1 1 1 1 2

Page 6 of 18
 Semester-V

Subject: Management & Entrepreneurship Subject Code:18EE51

Course Outcomes
Explain the nature, characteristic, needs and process of management, entrepreneurship and
CO1
intrapreneurship
Apply the knowledge of project proposal for getting the funding from different private and
CO2
government agencies and also apply knowledge of cpm/ pert algorithm for enterprise
CO3 Utilize the schemes and facilities provided by government, social responsibility
CO4 Manage the human, material resources and capital in enterprise, ssi
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 3 2

CO2 3 2 2 2

CO3 1 3 2 2

CO4 1 2 2 2 2 1

Average 1 2.5 2 2 1
2.25

Subject: Microcontrollers Subject Code:18EE52

Course Outcomes
CO1 Understand and discuss the architectural details of Microcontroller and Instruction set
Develop and analyze the assembly and C language programs to facilitate the data movement,
CO2
arithmetic, logical, branching and other operations
Design and apply the knowledge of On-chip peripherals and also to interface external hardware to
CO3
microcontroller.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1
CO2 3 2 3
CO3 2 2 2 1 2 1 3
Average 2.33 2 2 1 2 1 2.33

Subject: Power Electronics Subject Code:18EE53

Course Outcomes
CO1 Illustrate types of power electronics circuits with applications, design and analyze power diode circuits

CO2 To explain steady state, switching and gate characteristics of power transistors and Thyristors

CO3 To design and analyze the performance parameters of various Converters

CO4
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 1 1 2

Page 7 of 18
 CO2 3 3 1 1 2
CO3 3 3 1 1 2
CO4 3 3 1 1 1 2
Average 3 3 1 1 1 2

Subject: Signals and Systems Subject Code:18EE54

Course Outcomes
CO1 Explain basic signals, its classification and properties of various system.
Analysis of the given continuous and discrete LTI system using frequency response, different
CO2
transform and convolution method.
CO3 Solve difference and differential equation and block diagram representation of the LTI system.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 1 3
CO2 2 2 2 1 3
CO3 2 2 2 1 3
Average 2 2 2 1 3

Subject: Electrical Machines Design Subject Code:18EE55

Course Outcomes
Compare electrical engineering materials and its properties, fundamental aspects of electrical
CO1
machine design
CO2 Design the main dimension, shunt and series field windings of DC machine
Design output equations, main dimension, estimate the number of cooling tubes and leakage
CO3
reactance of transformer
CO4 Design output equation, stator and rotor circuits of induction machine and synchronous machine
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2
CO2 3 3 2 2 2 2 3
CO3 3 3 2 2 2 2 3
CO4 3 3 2 2 2 2 3 3
Average 2.75 3 2 2 2 2 3 3

Subject: High Voltage Engineering Subject Code:18EE56

Course Outcomes
Apply their knowledge to distinguish breakdown phenomenon in dielectrics and specifications of
CO1
Equipment conforming to standards.
CO2 Explain different types of generation of high AC & DCvoltages and currents.
CO3 Understand the practical measurement techniques for high voltages and currents
CO4 Summarize overvoltage phenomenon and insulation coordination in electric power systems
CO5 Acquire the knowledge of testing various materials and electric apparatus in power systems.
Page 8 of 18
 CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 2 3 2
CO2 3 2 2 2 2 2
CO3 3 2 2 2 2 2
CO4 2 1 1 1 3 2
CO5 3 2 2 2 3 2
Average 2.6 1.8 1.8 1.8 2.6 2

Subject: Microcontroller Laboratory Subject Code:18EEL57

Course Outcomes
CO1 Formulate programs to handle data movement, arithmetic and logical instructions
CO2 Develop codes to handle different data types
CO3 Interface and control the external peripherals using microcontroller
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 3 2 3 2 2 3
CO2 2 3 2 3 2 2 3
CO3 2 3 2 2 3 2 2 2 3
Average 2 3 2 2 3 2 2 2 3

Subject: Power Electronics Lab Subject Code:18EEL58

Course Outcomes
CO1 To Study the Static characteristics and performance of semiconductor devices.
CO2 Compare different methods of triggering SCR
To Verify the performance of single phase controlled Full wave rectifier and AC voltage controller With R
CO3
and RL Loads.
To analyze the speed Control of different motors and to discuss the performance of single phase full
CO4
bridge inverter connected to resistive load
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 1 2 2 1 3
CO2 3 2 1 2 2 1 3
CO3 3 2 1 2 2 1 2
CO4 3 2 1 2 2 1 2
Average 3 2 1 2 2 1 2.5

Page 9 of 18
 Semester-VI

Subject: Control Systems Subject Code:18EE61

Course Outcomes
CO1 Analyze and model electrical and mechanical system using analogous
Apply block diagram reduction techniques and signal flow graph methods to obtain
CO2 transfer function of systems
Design and Analyze the stability of control system, ability to determine transient and steady
CO3 state time response

CO4 Examine the performance of system stability using Root locus , Bode plots ad Nyquist plots
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2
CO2 1 1 1 2
CO3 2 2 2 2
CO4 2 2 1 2
Average 1.75 1.75 1.5 2

Subject: Power System Analysis-1 Subject Code:18EE62

Course Outcomes
Understand one-line diagram, per unit system & construct per unit impedance diagram of power
CO1 system.
Analyze three phase symmetrical faults on power system and understand selection of circuit
CO2 breaker rating.

CO3 Assess unbalanced phasors in terms of sequence components and to develop sequence networks.

CO4 Analyze various unsymmetrical faults on power system.

CO5 Inspect dynamics of synchronous machine and determine the power system stability.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3 3

CO2 3 3 2 2 3 2

CO3 3 3 2 2 3 2

CO4 3 3 2 2 3 2

Average 3 2.8 2 2 3 2.2

Page 10 of 18
Subject: Digital Signal Processing Subject Code:18EE63
Course Outcomes
Analyze signals using the discrete Fourier transform (DFT). And solve problems on circular
CO1
convolution using periodic, matrix and tabular methods.
Solve problems on efficient computation of DFT using DIT and DIF- FFT and composite DFT
CO2
algorithms.
Implement digital systems (FIR and IIR systems) in a variety of forms (direct form I and II,
CO3
parallel, cascade, ladder structure and linear phase realization).
CO4 Apply design (IIT and BLT) techniques for IIR type (Butterworth and Chebyshev) digital filters.
CO5 Design FIR type digital filters using "windowing method" and “frequency sampling method.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 3
CO2 3 2 3
CO3 2 2 3
CO4 3 3 2 3
CO5 3 3 2 3
Average 2.6 2.4 2 3

Subject: Electric vehicle technologies Subject Code:18EE646

Course Outcomes
Understand types of EV and utilize the concepts of kinetics, dynamics, performance parameters
CO1
and characteristics of vehicles.
Model energy storage systems for EV and HEV, charging methods and power electronic
CO2
converter for batteries
CO3 Explain and adopt different drive trains and propulsion systems for EV and HEV
CO4 Design and analyse electric and hybrid electric vehicles.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 1 1 1 1
CO2 2 2 2 2 2 2 1 3
CO3 2 2 2 1 2 2 1 3
CO4 2 2 2 2 1 3

Average 2 1.75 1.67 1.5 1.75 1.75 1 2.5

Subject: Embedded Systems Subject Code:18E644

Course Outcomes
CO1 Understand about the components and interfaces of embedded systems
CO2 Enumerate about trade offs and challenges of embedded systems
CO3 Apply software aspects and programming to design embedded systems
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 1 1
CO2 2 1 1 1 1
CO3 2 1 1 1 1
Average 2 1 1 1 1 1
Page 11 of 18
Subject: Control system lab Subject Code:18EEL67
Course Outcomes
Assessing the time and frequency domain reposes of a given second order system by using
CO1
software package and discrete components
CO2 Design, analyze and simulate Lead, Lag and Lag – Lead compensators for given specifications
Determine the performance characteristics of AC and DC servomotors and synchro-transmitter
CO3
receiver pair used in control systems
Simulate the DC position and feedback control system to study the effect of P, PI, PD and PID
CO4
controller and Lead compensator on the step response of the system
Write a script file to plot root locus, bode plot, Nyquist plots to study and compare the stability
C05 aspects of the system using a software package
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 1 2 2 2 2 2
CO2 3 1 2 2 2 2 2
CO3 3 2 2 2 1
CO4 3 2 2 2 2 1 2
C05 3 2 2 2 2 3
Average 3 1.5 2 2 2 1.75 2

Subject: Digital Signal Processing Lab Subject Code:18EEL68

Course Outcomes
Compute the frequency Response and time Response of the gven system using sampling
CO1
theorem.
Solve impulse response and step response of a given difference equation theoretically & by using
CO2
a suitable software and compare the results.
Compute N-point DFT as well N-point FFT (Both DIT and DIF) of a given sequence and also
CO3
plot magnitude and phase response
CO4 Perform Convolution of (Linear and circular) two sequences using DFT and IDFT.
Design and implement IIR and FIR digital filter to meet the given specification using suitable
CO5
software
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 2 3 2 2 3
CO2 3 2 2 3 2 2 3
CO3 3 2 2 3 2 2 3
CO4 3 2 2 3 2 2 3
CO5 3 2 2 3 2 2 3
Average 3 2 2 3 2 2 3

Page 12 of 18
 Semester-VII

Subject: Power System Analysis-2 Subject Code:18EE71

Course Outcomes
CO1 Formulate network matrices and models for solving load flow problems
CO2 Perform power flow analysis of power systems using numerical iterative techniques
CO3 Solve issues of economic load dispatch and unit commitment problems
CO4 Analyze short circuit faults in power system networks using bus impedance matrix
CO5 Apply numerical techniques to solve swing equation for stability analysis
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3 3
CO2 3 3 2 2 3 2
CO3 3 3 2 2 3 2
CO4 3 3 2 2 3 2
CO5 3 2 3 2
Average 3 2.8 2 2 3 2.2

Subject: Power System Protection Subject Code:18EE72

Course Outcomes
CO1 Discuss components of protection scheme, performance of protective relays and overcurrent protection.
Discuss protection of Generators, Motors, Transformer, Bus Zone Protection, pilot protection and distance
CO2 protection.

CO3 Understand the construction and operation of different types of circuit breakers.

Explain the features of fuse, causes of over voltages and its protection, also modern trends in Power
CO4 System Protection.

CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 2 2 3 1
CO2 3 2 2 2 3 2
CO3 3 2 2 2 3 2
CO4 3 2 2 2 3 2
Average 3 2 2 2 3 1.75

Subject: IDG Subject Code:18EE733

Course Outcomes
CO1 Understand and Explain the concepts of Distributed Generation by various Sources of Energy.
Analyse the Power System Performance, Overloading and Losses impacts on Distributed
CO2
Generation
CO3 Interpret Voltage Magnitude Variations impacts on Distributed Generation
CO4 Study and Solve Power Quality Disturbances impacts on Distributed Generation
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
Page 13 of 18
 CO1 3 2 1 1 1 1
CO2 3 2 1 1 1 1
CO3 3 2 1 1 1 1
CO4 3 2 1 1 1 1
Average 3 2 1 1 1 1

Subject: Utilization of Electrical Power Subject Code:18EE742

Course Outcomes
Understand and discuss the different types of electrical heating, welding and electrolytic process
CO1
employed in domestic and industrial applications
Understand and apply the knowledge of fundamental engineering principles to design various
CO2
lighting systems for different applications.
Apply the basic knowledge of engineering to analyze the behavior of electrical traction systems
CO3
under various conditions of operation.
Understand and discuss the importance of electric vehicles and hybrid electric vehicles and its
CO4
architectures.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 2 2 2 2 3 2
CO2 2 2 2 2 3 2
CO3 3 2 2 2 3 2
CO4 2 2 2 3 2
Average 2.25 2 2 2 3 2

Subject: Smart Grid Subject Code:18EE744

Course Outcomes
CO1 Explain the concept of Smart grid enables the Electric Net and need of smart grid.
CO2 Outline the benefits and drivers of DC Power delivery system
CO3 Summarize the Intelligrid Architecture for the smart grid.
CO4 Explain the Efficient Electric End-use Technology Alternatives.
CO5 Discuss Demand side planning and Evaluation
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 3
CO2 3 2 3
CO3 3 2 2 3
CO4 3 2 3
CO5 3 2 3
Average 3 2 2 3

Subject: Power System Simulation Lab Subject Code:18EEL76

Course Outcomes
Construct a program in MATLAB package to assess the performance of medium and long
CO1
transmission lines.
To obtain the power angle characteristics of Synchronous machine and calculation of bus current,
CO2
bus power & line flows by developing a program in MATLAB package.

Page 14 of 18
 CO3 Develop a program in MATLAB package to assess the transient stability under three phase faults
To formulate bus admittance, bus impedance and Jacobian matrices of interconnected power
CO4
systems by developing a program in MATLAB package
Solve Power flow problem, economic load dispatch and short circuit problems on power system
CO5
using MIPOWER package
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 3 3 3 3 3
CO2 3 3 3 3 3 3 2 3
CO3 3 3 3 3 3 3 2
CO4 3 3 3 3 3 3 3
CO5 3 3 3 3 3 3 3
Average 3 2.8 3 3 3 3 2 2.8

Subject: Relay and High Voltage Lab Subject Code:18EEL77

Course Outcomes
Apply knowledge on conduct experiment for obtaining breakdown characteristic of air insulation
CO1 subjected for HVAC, HVDC applications to distinguish between Uniform/Non-uniform field
conditions.
Apply knowledge to assess quality of transformer oil sample by conducting experiment as per
CO2 standards and assessing dielectric strength of it.
Analyze the Electromechanical & Microprocessor based type of over current, overvoltage &
CO3 under voltage relays.
Acquire the knowledge experimentally by map field lines for co-axial cable model using
CO4 electrolytic tank and protection of Motor & Generator.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 2 2 2 2 3 3
CO2 3 2 2 2 2 2 3 3
CO3 3 2 2 2 2 2 3 2
CO4 3 2 2 2 2 2 3 2
Average 3 2 2 2 2 2 3 2.5

Subject: Project Phase I Subject Code:18EEP78

Course Outcomes
Ability to identify gap from literature survey, demonstrate technical knowledge on complex
CO1
engineering problem of selected project topic
Identify, Select, Apply a suitable engineering/IT tool in modelling/data interpretation/analytical
CO2
Studies, conduct projects leading to a logical solution
Design multi-disciplinary engineering solutions to complex problems addressing societal and
CO3
environmental concerns
CO4 Communicate effectively to a diverse audience and develop technical reports and publications
CO5 Work as a team member/leader to manage projects and costs in a diversified environment
CO-PO-PSO Mapping
COs POs PSOs
Page 15 of 18
 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3 1 3 3 3 3
CO2 3 3 3 3 1 3 3 3
CO3 3 3 2 3 3 1 3 3 3
CO4 3 2 2 3 3 3 3
CO5 3 2 3 3 3 3 3 3 3

Average 3 3 2.5 3 3 3 3 1.4 2.5 3 3 3 3 3 3

Semester-VIII
Subject: Power System Operation and Control Subject Code: 18EE81
Course Outcomes
Describe various levels of controls in power systems, components, architecture and configuration
CO1 of SCADA
Develop and analyze the mathematical model of automatic generation and control in Power
CO2 System

CO3 Analysis of controlling voltage and reactive power in Power System

CO4 Explain security and State estimation of power System

CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 1 3 2
CO2 3 2 1 1 1 1 1 1 1 3 2
CO3 3 2 1 1 1 1 1 1 1 3 2
CO4 3 2 1 1 1 1 1 3 2
Average 3 2 1 1 1 1 1 1 1 3 2

Subject: Electrical Estimation and Costing Subject Code: 18EE822

Course Outcomes
CO1 Acquire knowledge on general principles of estimation & costing, IE rules, IE-Act

CO2 Identify considerations & types of Residential wiring, Applying Safety rules

CO3 Analyse design aspects for service connections, Power circuits & their Earthing

CO4 Estimate the cost of Overhead Transmission & Distribution Lines, Sub-station.

CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 2 2 2 2 2 2

CO2 3 2 2 2 2 2 2

CO3 3 2 2 2 2 2

CO4 3 2 2 2 2 2 2

3 2 2 2 2 2 2
Average

Page 16 of 18
Subject: Project Work Phase - 2 Subject Code: 18EEP83
Course Outcomes
Apply the fundamental knowledge of mathematics, science and engineering principles in design
CO1
of solutions or system components
Identify, Select, Apply a suitable engineering/IT tool in modelling/data interpretation/analytical
CO2
studies, conduct experiments leading to a logical solution
Design multidisciplinary engineering solutions to complex problems addressing societal and
CO3
environmental concerns
CO4 Communicate effectively to a diverse audience and develop technical reports and publications.
CO5 Work as a team member/leader to manage projects and costs in a diversified environment.
CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3 3 2 2 2
CO2 3 3 3 3 3 3
CO3 3 3 3 3 3 3 3 3 3
CO4 3 3 3 3 3
CO5 3 3 3 3 2 2 2

Average 3 3 3 3 3 3 3 3 3 3 3 2.6 2.6 2.6

Subject: Technical Seminar Subject Code: 18EES84

Course Outcomes
CO1 Identify, understand, and discuss current, real-time issues

CO2 Improve oral and written communication skills

Attain, use and develop knowledge in the field of electrical and electronics engineering and other
CO3 disciplines through independent learning and collaborative study

CO4 Explore an appreciation of the self in relation to its larger diverse social and academic contexts.

CO5 Demonstrate the ability to assess and report

CO-PO-PSO Mapping
POs PSOs
COs
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
CO1 3 3 3 3 3 3 3

CO2 3 3 3 3

CO3 3 3 3 3 3 3

CO4 3 3 3 3 3 3 3
CO5 3 3 3 3 3 3 3
Average 3 3 3 3 3 3 3 3 3 3

Page 17 of 18