MATERIAL SAFETY DATA SHEET

According the European directive 2001/58/CE Date :01/01/2025

Section 1. Chemical Product
MSDS Name: VALVE REGULATED LEAD-ACID BATTERY
Manufacturer: HENGLI ( VIETNAM ) TECHNOLOGY BATTERY CO.,LTD
Address: NO.4 ROAD, NHON TRACH 3 INDUSTRIAL PARK - PHASE 2, LONG THO COMMUNE,
NHON TRACH DISTRICT, DONG NAI PROVINCE, VIET NAM
Tel: 0084-02513566872-150
Products: VALVE REGULATED LEAD-ACID BATTERY CB7-12 , 2&4&6&8&12&16&24 voltage batteries.

Section 2. Composition /Information on Ingredients:

Chemical Nature: Lead, Lead Oxide, Lead Sulfate, Sulfuric Acid
CAS-No/EINECS NO.: List as below
Tariff No. 85072000
Dangerous ingredients which have to be mentioned according to 99/45/EEC and it adaptations
Chemical Name HAZARDOUS TLV(UNITS) RISK PHRASES
CAS No. %by weight
Lead 50 N/A
7439-92-1
Lead Oxide 23 N/A
1309-60-0
Lead Sulfate 3 N/A
7446-14-2
Sulfuric Acid 13 1.25-1.35g/ml
7664-93-9
AGM separator 8 N/A
Battery Casing 3 N/A

Section 3. Hazards identifications

General: Under normal operating conditions, the internal material will not be
hazardous to your health. Only internally exposed material during
production or case breakage or extreme heat (fire) may be hazardous to
your health. The Common known rules for handing of chemicals should
be obeyed. Do not eat/drink the product.

Section 4. First –aid measures:

Inhalation: In case of excessive inhalation remove the person to fresh air and at rest
Obtain medical advice.
Skin Contact: Remove contaminated clothing. Wash affected areas with plentyof water
and soap. If irritation occurs, consult a physician.

Eye contact: Rinse eyes immediately with running water for at least ten minutes.
Consult an ophthalmologist.
Ingestion: Rinse mouth with water Give plenty of water to drink. Do not induce
vomiting. Obtain medical advice.
Section 5. Fire-fighting measures
Suitable extinguishing media: Carbon dioxide (CO2), foam, dry chemical powder.
Extinguishing media not to be used: Never use a direct water jet.

Personal protective equipment: Wear full protective clothing. Use self-contained breathing
Section 6. Accidental release measures:
Personal precautions Wear protective clothing. Keep unprotected persons away.
Environmental precautions: Avoid discharge and penetration into sewerage systems, waterways,
pits, and cellars.
Methods for cleaning up: Collect spilled material with an insert standard absorbent like sand or
silica. Care for well-Ventilated conditions. Recycle or dispose of the
materials in an appropriate way.

Section 7. Handling and storage

General Obey the common known rules and precautions for handling with
chemicals.
Storage: Store product in well-filled, appropriate coated and tightly closed
containers avoiding influence of oxygen/air, light and humidity .Store
at a cool and constant temperature.

Section 8. Exposure controls/Personal protection

Exposition/ Technical measures Atmospheric vapor concentrations must be minimized by adequate
ventilation.
Protection of hands, eyes and skin: To protect hands, eyes and skin, the use of appropriate chemical
resistant glovers, safety glasses and suitable protective clothing is strictly recommended.

Section 9. Physical and chemical propertied of Electrolyte

Physical state: liquid Solubility in water: soluble
Color: clear Vapor pressure: no applicable
Odor: acidic odor Explosion limit: not applicable
pH value: not determined Oxidizing properties: not applicable
Specific gravity: 1.215-1.350 (at 25 C)
o
Flashpoint: none
Auto flammability: not determined Partition coefficient: not determined
Melting Point: lead 327.4 C
o
Boiling Point: 1515oC
Freezing Point: not determined

Section 10. Stability and Reactivity

Good stability at standard temperature.
Reactivity: Avoid contact with acids. Alkali or strong oxidizing agents.
Hazardous decomposition products: carbon monoxide and unidentified organic compounds my be formed during
combustion.

Section 11. Toxicological information

The product is multi component mixture for which no toxicological date exists.
This preparation is classified XI, N R38-43.
Section 12. Ecological information
In general, no ecological date is available for preparations.
Precautions Avoid disposing into drainage systems and in the environment.

Section 13.Disposable considerations

Don not dispose of int environment or into sewerage. If recycling is not possible, the product and its container have
to be disposed of in accordance with your local legislation and regulations.

Section 14. Transport Information

We hereby certify that the batteries conform to the UN2800 classification as “Batteries, wet, Non-Spillable, electric
storage”. We further certify that under (I.A.T.A.) Dangerous Goods Regulation, 64th edition, UN2800 provision
A67 and the (D.O.T.), CFR 49 Section 173.159 paragraph d.,and special provision 238, the batteries having met the
related conditions are EXEMPT from hazardous goods regulations, and therefore are unrestricted for
Transportation by any means.
For you reference:
IATA Dangerous Goods Regulation, 64th Edition, Section 4.5A, Special Provision;
A67 Non-spillable batteries are considered to be non-dangerous if at a temperature of 55 deg. C(130 deg. F),
the electrolyte will not flow from a ruptured or cracked case and there is no free liquid to flow and if, when
packaged for transport, the terminals are protected from short circuit.

We hereby certify that the batteries is General cargo, not DG cargo.

Section 15.Regulatory Information

Symbol: N/A

R/S-Phrases:
R38 Irritation to skin
R43 May cause sensitization by skin contact
S2 Keep out of reach of children
S24 Avoid contact with skin
S37 Wear suitable gloves
S61 Avoid release to environment. Refer to special instructions.

Section 16. Other information

The information on this Material Safety Date Sheet (MSDS) was obtained form current and reputable sources.
However, the data is provided without any warranty; expressed or implied, regarding its correctness or accuracy. It
is the user’s responsibility to assume liability on loss, injury, damage, or expense resulting from improper use of
this product. Any previous MSDS of this product mentioned above are hereby replaced with this new document.
We urge you to make this information available as appropriate in your organization and to any others with whom
you arrange to handle this product.

MSDS Preparation Date: 01/01/2025