Controller
PRE-ASSEMBLED ELECTRICAL INSTALLATION
MicroBASIC
CONTROLLER
Security system according
to standard EN81-28
Emergency Telephone
Car
Operating
Panel
Comfort
(Inverter)
Landing Plug&Play
Operating Electrical Installation
Panel
DESCRIPTION
The MicroBASIC Controller boasts centralised electronics and parallel communication and can support a maximum of 10 stops for simplex installations.
Thanks to the AMB1 and AMB2 electronic expansion modules, it can reach up to 16 stops and be installed in group of 4 lifts
It allows for the control of 1 or 2 speed hydraulic lifts and also electric lifts of 1 speed, 2 speeds or frequency variation (3VF) whether they have
asynchronous (geared) or synchronous (gearless) motors. In the case of frequency variation, the combination of the MicroBASIC controller and the DSP
6P inverter guarantees the best features possible with a high level of comfort
The MicroBASIC Pre-assembled Electrical Installation (PEI) includes not only the control elements and their casing (controller, car and floor operating
panels, inspection box, pit box, magnetic position switches, limit switches…), but also the required wiring for interconnections (travelling cables, shaft
wiring,…) and the cables for the supply and control of the lift’s various electromechanic elements (pipes for the hydraulic power unit or cables of the
machine, operator, safety contacts, car lighting,…)
All cables come with their corresponding plug-in connectors which means that they are 100% “plug and play”
The MicroBASIC PEI is available for both architectures with machine room (WMR) and machine room less (MRL)
The elements that make up the Pre-assembled Electrical Installation (PEI) can be separately purchased (controller, operating panels, etc)
14
ELECTRONICS
Controller
PRE-ASSEMBLED ELECTRICAL INSTALLATION
MicroBASIC
FEATURES Op: opcional | Std: standard
BUILDING / SPACE Alarm and open doors push buttons Std
Maximum number of stops 10 LED 7-segment display with position and arrow indicator Std
Maximum number of stops with AMB1/AMB2 expansion modules 16 Emergency lighting soffit Std
Asymmetric stops (asymmetric lift in groups of lifts) Opt Fonomac 3 emergency telephone Std
Reduced shafts and/or headrooms Opt LCD or graphic display, additional push buttons and indicators,
Opt
key switches and other LOP elements
Double or triple landing Opt
600 mm x 600 mm 38 W LED plate for car lighting Opt
Upper machine room Std
Lower machine room Opt Car roof lighting soffit Std
MRL cabinet on the top floors (distance to the machine ≤ 10 m) Std Curtain photocell Std
MRL cabinet on the ground or middle floor (distance to the Throughbeam photoelectric sensor
machine ≤ 25 m) Opt
Direction and next departure arrows in jamb at the car entrance Std
Alarm push buttons on car roof and under floor Std
CONTROLLER
Magnetic position switches Std
Maximum number of lifts in a group 2
Electrical cam Opt
Universal controller Std
Loading cells Opt
1 push button collective controller Std
2 push button collective controller Opt SUPPORTED ELEMENTS
1 row of LOPs (SIMPLEX) Std Three-phase supplied voltage 380/400/415 Vac Std
1 row of LOPs for every 2 lifts (DUPLEX) Std Three-phase supplied voltage 208/220 Vac Opt
1 row of LOPs per lift (DUPLEX) Opt One-phase supplied voltage 220/230 Vac Opt
Maximum speed of 1.6 m/s Std Machine brake voltage 220 Vac (ELECTRICAL LIFT) Std
EN81-72 (Fire brigade) Opt Machine brake voltage ≠ 220 Vac (ELECTRICAL LIFT) Opt
Machine thermocontact connection (ELECTRICAL LIFT) Std
STANDARDS
Valve voltage 110 Vac (HYDRAULIC LIFT) Std
EN81-1 (ELECTRICAL LIFT) Std
Valve voltage ≠ 110 Vac (HYDRAULIC LIFT) Opt
EN81-2 (HYDRAULIC LIFT) Std
Automatic landing doors Std
EN81-1/2 A2 (MRL) Std
Semi-automatic hinged landing doors Opt
EN81-1/2 A3 (Prevention of uncontrolled movements) Std
220 Vac one-phase door operator Std
EN81-28 (Remote alarms) Std
Other type of door operator Opt
EN81-21 (Reduced shafts and headrooms) Opt
EN81-70 (Access for disabled people) Opt
FUNCTIONS
EN81-73 (Fire) Opt
Automatic rescue in the event of a power supply failure
EN81-72 (Fire brigade) Opt Std
(3VF ELECTRICAL LIFT, HYDRAULIC LIFT)
INCLUDED ELEMENTS
Electrical rescue operation (3VF ELECTRICAL LIFT) Std
Controller board with programming interface
Std Electro-manual rescue by means of unbalanced load
(push buttons + display) Opt
(GEARLESS ELECTRICAL LIFT WITH MACHINE ROOM)
DSP 6P frequency inverter (3VF ELECTRICAL LIFT) Std
Car relevelling with door open (HYDRAULIC LIFT) Std
Soft Starter (HYDRAULIC LIFT) Opt
Pre-opening of doors (ELECTRICAL LIFT) Opt
Electrical protection kit Opt
Alarm filtering according to EN81-28 Std
Car - machine room intercom Opt
Push buttons with light indicator Std
Shaft lighting screens Opt
Push buttons with light and sound indicator Opt
Machine lighting screen (ELECTRICAL MRL LIFT) Std
Electronic gong to announce arrival at each floor Opt
Stainless steel 80 mm x 230 mm floor LOPs with call push button
Std
and company logo In-car voice synthesiser Opt
Surface-mounted LOPs or other model Opt Alarm siren Std
Display, light indicators, additional push button, key switches and Car lighting timer Std
Opt
other LOP elements
Car weight control Opt
240 mm column stainless steel COP with call push buttons Std 2 switches for shaft lighting control (controller and shaft) Std
Surface-mounted LOPs, flat plate or other shape Opt 3 push button for shaft lighting control (controller, car and shaft) Opt
15
CONTROLLER
MicroBASIC
CONFIGURABLE
MicroBASIC EXPRESS
The MicroBASIC is quite easy to be adapted to existing
installations. In urgent cases, due to irreparable breakdowns,
fires, etc., MP offers for the existing installation a solution in
24 hours by means of the configurable controller which is
available at SERVICEnter.
The controller with the shorter delivery delay.
ModerniSations
CONFIGURABLE CONTROLLER
An easy and intuitive wizard guides the purchase order according to the needs
A base standard controller is supplied together with a few materials (which depend on the required options)
The customer should make a few easy adaptations, which are well-documented, on the base standard controller
The wizard offers the guidelines for the adaptations
Distances between floors are fixed; the wizard offers options when the installation presents differences
All the options of number of floors are not available: the wizard approximates the solution to, finally, adapt it to the needs
WIZARD FOR PURCHASE ORDERS
In addition to walk you through the purchasing process, the wizard issues the codes for required components. These codes are available at SERVICEnter
The wizard issues the required guidelines for customer adaptations
The wizard directly make the purchase order for these codes
The wizard is integrated within SERVICEnter
16
Versatilidad
Confort Ecoeficiencia
8
ELECTRONICS
CONTROLLERS
ELECTRONIC CONTROLLERS
Technological options to raise your potential
Electronic controllers that stand out because of their adaptability to
the different traction technologies. They include a frequency inverter
of our own design with DSP (Digital Signal Processing) technology
microprocessors. Our main aim is to ensure the highest levels
of safety and comfort for the passenger and to make easier the
installing and maintenance tasks.
Our possibilities for customisation do not end here: on request, we
can implement any special feature to meet the installation needs. In
addition, all our products, services and process are in accordance the
standard requirements.
Through the online sales service, SERVICEnter www.mplifts.com, MP
offers the opportunity to purchase the whole electronics shown in
the present catalogue and also:
• 24 hour emergency telephone Fonomac 3.
• Emergency devices.
• Positioning devices (magnet switches, photoswitches).
• Inspection boxes.
• A wide range of accessories for the controller (contactors, control
devices, transformers, relays, etc).
9
CONTROLLERS
ADAPTATIONS OF
CONTROLLERS TO
EXISTING INSTALLATIONS
MP has the ability to adapt the controller or the preassembled
electrical installation to the existing lift needs, both with
MicroBASIC and Via Serie controllers. In this way, the
existing structure is preserved as much as possible in order
to avoid any adaptation involving civil works... Should you
need further information, refer to our Sales Department
Representative in your area.
MP supplies controllers in the form of Preassembled Electrical
Installations (PEI) where there are electronic boards together
with electric boxes, operating panels and all the other electric
components, as well as the required connection wires, in
such a way the assembly is quick and easy.
10
ELECTRONICS
