8 7 6 5 4 3 2 1

6-5/8 REG
D PIN D
W/STRESS
RELIEF

Ø3.065
ID

Ø3.065
* - INCLUDED IN REPAIR KIT P/N: NZV-316-RK
+ - INCLUDED IN SEAL KIT P/N: NZV-316-SK
15.650 STS

C C

ACCESSORIES
10.414 STEM q

ITEM PART NUMBER DESCRIPTION COMMENTS

23 SST-316-A ASSY/DISASS TOOL SOLD SEPARATELY
24 PLY-A.140 CIRCLIP TOOL SOLD SEPARATELY
6-5/8 PARTS LIST
REG BOX A B A ITEM QTY PART NUMBER DESCRIPTION MATERIAL KIT COMPONENTS
W/STRESS 1 1 NZV-738316-06B VALVE BODY MS-43_4330V
RELIEF 2 1 1MH023 SINGLE SLOT BALL MS-8_17-4PH HH1150 *
VIEW1 3 1 1MHC226 NQ 316 OUTER SEAT MS-44_AMS 4881D *
SCALE 1/5 4 1 1MHC229 NZ 316 INNER SEAT MS-44_AMS 4881D *
5 1 1MH021 SPRING RING MS-8_17-4PH HH1150
7.328 BEVEL TYP. 6 1 1MH027 UPPER SPLIT RETAINER MS-8_17-4PH HH1150
7 1 1MH028 NMU/NMR 3-1/16 ID SOLID RING MS-8_17-4PH HH1150
7.375 OD 8 2 N1300-475-AS CIRCLIP RING 15-5 PH PASSIVATED
B 22 B
SECTION A-A 9 1 WHT-0387-INX 3-1/16 ID SNAP RING MS-20-INX
SCALE 1/2 10 2 2471-32 NESTED SPRING MS-20-INX *
11 1 1C2229 CLASS2 SLEEVE MS-8_17-4PH HH1150
12 1 1C2231 CLASS2 STEM MS-8_17-4PH HH1150
.888 13 1 100232 COUPLER MS-8_17-4PH HH1150
.886 14 1 100230-FIB THRUST WASHER HASTELLOY/FIBREX *
15 1 KA183-2-248 248 O RING HNBR 85 MS-48_KA183-85 */+
16 2 PEEK-8F-248 248 BU RING PEEK MS-25_PEEK *
17 1 KA183-2-032 SLEEVE O-RING MS-48_KA183-85 */+
18 2 PEEK-8-032 SLEEVE BACK-UP RING MS-25_PEEK */+
19 1 4031B085TP021 STEM T-SEAL CLASS2 MS-48/MS-25 */+
24 20 1 KA183-2-245 245 O RING MS-48_KA183-85 */+
21 2 PEEK-8-245 245 MALE BACKUP RING MS-25_PEEK *
22 1 KVW-078-LA 7/8 HEX WRENCH STEEL
DRAWN
DETAIL B
SCALE 1
J Halabi
CHECKED
4/11/2022
PACKARD INTERNATIONAL INC
A Dhungel 4/11/2022
A QA
TITLE
A
S Bobbitt LOWER TOP DRIVE VALVE 7-3/8 OD X
P/N:NZV-738316-06AC2 REV0 MFG
23 M Knight 4/11/2022 3-1/16 ID 15 KWP CLASS2 H2S TRIM
APPROVED
S Bobbitt 4/11/2021 SIZE DWG NO REV

D NZV-738316-06AC2 BOM 0
SCALE
SHEET 1 OF 2
8 7 6 5 4 3 2 1
 4 3 2 1
1. THIS IS A CRITICAL LOAD COMPONENT AND IS DESIGNED TO COMPLY WITH THE REQUIREMENTS OF API SPECIFICATION 7-1 CURRENT EDITION.

2. THE MATERIAL SHALL CONFORM TO PACKARD

MATERIAL SPECIFICATION AISI4340 PER PACKARD MS-23 OR AISI 4330 V MOD PER PACKARD MS-43
WITH THE FOLLOWING REQUIREMENTS:
D A. THE MINIMUM HARDNESS SHALL BE 285 BRINELL (311-363 BHN)REF. D
B. THE MATERIAL MIN YIELD STRENGTH OF 140 KSI.
C. MAGNETIC PARTICLE INSPECTION PER WI-3 (ASTM E 709, ISO 9934-1) IN THE FINISH-MACHINED CONDITION PRIOR TO COATING.
D. THE TRACEABILITY NUMBER FOR THE COMPLETE ASSEMBLY SHALL BE CROSS-REFERENCED TO THE DOCUMENTATION.
DOCUMENTATION TO INCLUDE:
-REPORT OF LADLE CHEMISTRY
-REPORT OF TENSILE AND YIELD STRENGTH (ASTM A 370, ISO6892)
-REPORT OF ELONGATION AND REDUCTION IN AREA TESTING.
-REPORT OF CHARPY IMPACT VALUES PER ISO 148 (ASTM A 370 OR E 23) V NOTCH. 31 FT-LBS AVG WITH NO SINGLE VALUE BELOW 24 FT-LBS AT -4°F.
-REPORT OF HARDNESS TESTING (ASTM A370, ISO 6506-1).
-REPORT OF NDE INSPECTION.

3.MATERIAL TRACEABILITY TO BE MAINTAINED PER THE SERIALIZATION METHOD PRESCRIBED IN THE SPECIFICATION AND PROCEDURE MANUAL DP-5.7.3
C C
4. STAMPING WITH TRACEABILITY NUMBER, INSIDE DIAMETER, AND THE SIZE AND STYLE OF THE CONNECTION AT EACH END
AS SHOWN IN THE MARKING DETAIL DRAWING. STAMP WITH RADIUSED CHARACTER(LOW STRESS) AS SPECIFIED BY API 7-1.

5. 6-5/8 REG CONNECTIONS SHALL BE PER API 7-2 CURRENT EDITION. CONNECTION SHOT PEENED PER PACKARD WI-4.

6. BODY PHOSPHATIZED PER PACKARD SPECIFICATION WI-5.

7. THREAD PROTECTORS ARE INCLUDED.

8. API 7-1 CLASS OF OPERATION: CLASS 2.

9. H2S TRIM.

10. LOAD CAPACITY:

B -PURE TENSION TO YIELD: 1,078 SH TONS B
-PURE TORSION TO YIELD: 91,546 FT-LBS
-RECOMMENDED MAKE-UP TORQUE:54,927 FT-LBS
-COMBINED LOADING TENSION AT MAX PRESSURE AND FULL MAKE-UP: 825 SH.TONS

11. OPERATING LIMITS:

-INTERNAL PRESSURE: 15,000 PSI WORKING PRESSURE (22,500 PSI SHELL TEST PRESSURE)
-MAX EXTERNAL PRESSURE: 15,000 PSI
-TEMPERATURE RANGE: -4°F (-20°C) TO 194°F (90°C)

DRAWN
J Halabi
CHECKED
4/11/2022
PACKARD INTERNATIONAL INC
A Dhungel 4/11/2022 TITLE
A QA
S Bobbitt
A
LOWER TOP DRIVE VALVE 7-3/8 OD X
P/N:NZV-738316-06AC2 REV0 MFG
M Knight 4/11/2022 3-1/16 ID 15 KWP CLASS2 H2S TRIM
APPROVED
S Bobbitt 4/11/2021 SIZE DWG NO REV

C NZV-738316-06AC2 BOM 0
SCALE
SHEET 2 OF 2
4 3 2 1