Scribd
Upload
138 views1 page

Hydraulic Hand Riveter Inspection Checklist

The document is a checklist for inspecting a hydraulic hand riveter, covering various components such as general condition, hydraulic system, jaw assembly, trigger and handle, nozzle/head inspection, rivet functionality, safety requirements, lubrication, and storage. Each section includes specific checks to ensure the tool is in proper working order and safe to use. The checklist also includes spaces for inspector and supervisor signatures and maintenance records.

Uploaded by

psmnebosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views1 page

Hydraulic Hand Riveter Inspection Checklist

The document is a checklist for inspecting a hydraulic hand riveter, covering various components such as general condition, hydraulic system, jaw assembly, trigger and handle, nozzle/head inspection, rivet functionality, safety requirements, lubrication, and storage. Each section includes specific checks to ensure the tool is in proper working order and safe to use. The checklist also includes spaces for inspector and supervisor signatures and maintenance records.

Uploaded by

psmnebosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IRAQ GATES CONTRACTING CO.

Hydraulic Hand Riveter Inspection Checklist


BU: Location: Date: WEEKDAYS
REMARKS
Reg No: Model: Document No: 1 2 3 4 5 6 7
1. General Condition
☐ Check for any visible damage (cracks, dents, wear).
☐ Ensure no missing or loose parts (fasteners, handles).
☐ Ensure the riveter is free of rust or corrosion.
☐ Verify that all labels and markings are intact and legible.

2. Hydraulic System
☐ Inspect hydraulic hose for leaks, cracks, or wear.
☐ Check fluid level in the hydraulic reservoir (if applicable).
☐ Test for smooth operation of hydraulic action (no jerks or delays).
☐ Ensure the hydraulic pressure gauge (if equipped) is functional and accurate.

3. Jaw Assembly
☐ Inspect the jaws for wear or damage.
☐ Check that the jaws grip rivets firmly and release them properly after installation.
☐ Verify the jaw housing is clean and free of debris.

4. Trigger and Handle


☐ Check the trigger for smooth operation (no sticking or stiffness).
☐ Ensure the handle grips are secure and undamaged.
☐ Test the trigger spring mechanism for proper tension and responsiveness.

5. Nozzle/Head Inspection
☐ Ensure the rivet nozzle is the correct size and in good condition.
☐ Verify the nozzle is securely attached to the tool.
☐ Check the condition of the nozzle thread for damage or wear.

6. Rivet Functionality
☐ Test the tool by installing a rivet to ensure proper functionality.
☐ Confirm that the rivet is inserted fully and securely.
☐ Check the spent mandrel is ejected cleanly.

7. Safety Requierments
☐ Verify that all safety features are in place and functioning.
☐ Ensure that the tool has no sharp edges or points that could cause injury.
☐ Confirm the tool’s safety mechanisms (if applicable) work correctly.

8. Lubrication
☐ Check lubrication points (if applicable) for adequate grease or oil.
☐ Ensure that moving parts are lubricated and move freely.

9. Storage and Maintenance


☐ Ensure the tool is stored in a clean, dry place when not in use.
☐ Record the date of last maintenance or inspection in a logbook.
Inspector Name & Signature: Date: NOTES:

Supervisor Name & Signature: Date:

You might also like