Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
SAFETY DATA SHEET
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product name Hot Melt Glue Stick
Product number 698462, 652076, 349348, 100024, 956373, 964193, 583333, 100012
Internal identification 698462, 652076, 349348, 100024, 956373, 964193, 100012, 583333
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Adhesive.
Uses advised against No specific uses advised against are identified.
1.3. Details of the supplier of the safety data sheet
Supplier Toolstream Ltd
Boundary Way
Lufton Trading Est
Yeovil
Ba22 8hz
01935 832222
[email protected]Contact person Regulatory Dept
1.4. Emergency telephone number
National emergency telephone In case of a medical emergency following exposure to a chemical, the public should call NHS Direct in
number England or Wales 111 or NHS 24 in Scotland (UK only).
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification (EC 1272/2008)
Physical hazards Not Classified
Health hazards Not Classified
Environmental hazards Not Classified
Notes
2.2. Label elements
Hazard statements NC Not Classified
2.3. Other hazards
This product does not contain any substances classified as PBT or vPvB.
SECTION 3: Composition/information on ingredients
3.2. Mixtures
Ethylene - Vinyl acetate polymer 60-100%
CAS number: 24937-78-8
Classification
Not Classified
1/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
Petroleum Resins 30-60%
CAS number: 64742-16-1
Classification
Not Classified
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
SECTION 4: First aid measures
4.1. Description of first aid measures
General information If in doubt, get medical attention promptly. Show this Safety Data Sheet to the medical personnel.
Inhalation No specific recommendations. If throat irritation or coughing persists, proceed as follows. Move affected
person to fresh air and keep warm and at rest in a position comfortable for breathing. Loosen tight
clothing such as collar, tie or belt. Get medical attention if any discomfort continues.
Ingestion No specific recommendations. If throat irritation or coughing persists, proceed as follows. Rinse mouth.
Get medical attention if any discomfort continues.
Skin contact No specific recommendations. Rinse with water. Get medical attention if any discomfort continues. If
adhesive bonding occurs, do not force skin apart.
Eye contact Remove any contact lenses and open eyelids wide apart. Rinse with water. Get medical attention if any
discomfort continues. If adhesive bonding occurs, do not force eyelids apart.
Protection of first aiders Use protective equipment appropriate for surrounding materials.
4.2. Most important symptoms and effects, both acute and delayed
General information The severity of the symptoms described will vary dependent on the concentration and the length of
exposure.
Inhalation A single exposure may cause the following adverse effects: Temporary irritation. During application and
drying, solvent vapours will be emitted. Vapours in high concentrations are narcotic.
Ingestion May cause discomfort if swallowed.
Skin contact Prolonged contact may cause dryness of the skin. Bonds skin and eyes in seconds.
Eye contact May be slightly irritating to eyes. Bonds skin and eyes in seconds.
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.
Specific treatments No special treatment required.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water
fog. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.
5.2. Special hazards arising from the substance or mixture
Specific hazards None known.
Hazardous combustion products Thermal decomposition or combustion products may include the following substances: Harmful gases or
vapours.
5.3. Advice for firefighters
2/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
Protective actions during Avoid breathing fire gases or vapours. Evacuate area. Cool containers exposed to heat with water spray
firefighting and remove them from the fire area if it can be done without risk. Cool containers exposed to flames with
water until well after the fire is out.
Special protective equipment for Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
firefighters Firefighter's clothing conforming to European standard EN469 (including helmets, protective boots and
gloves) will provide a basic level of protection for chemical incidents.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions No specific recommendations. For personal protection, see Section 8. Bonds skin and eyes in seconds.
6.2. Environmental precautions
Environmental precautions Insoluble in water. Aquatic toxicity is unlikely to occur. However, large or frequent spills may have
hazardous effects on the environment. Collect spillage.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Reuse or recycle products wherever possible. Collect spillage with a shovel and broom, or similar and
reuse, if possible. Collect and place in suitable waste disposal containers and seal securely. Flush
contaminated area with plenty of water. Wash thoroughly after dealing with a spillage. Dispose of
contents/container in accordance with national regulations.
6.4. Reference to other sections
Reference to other sections For personal protection, see Section 8. For waste disposal, see Section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described in Section 8 of
this safety data sheet. Keep away from food, drink and animal feeding stuffs. Keep container tightly
sealed when not in use. Bonds skin and eyes in seconds.
Advice on general occupational Wash promptly if skin becomes contaminated. Take off contaminated clothing. Wash contaminated
hygiene clothing before reuse.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store away from incompatible materials (see Section 10). No specific recommendations.
Storage class Unspecified storage.
7.3. Specific end use(s)
Specific end use(s) The identified uses for this product are detailed in Section 1.2.
SECTION 8: Exposure controls/Personal protection
8.1. Control parameters
8.2. Exposure controls
Appropriate engineering controls No specific ventilation requirements.
Eye/face protection No specific eye protection required during normal use. Large Spillages: Eyewear complying with an
approved standard should be worn if a risk assessment indicates eye contact is possible.
Hand protection No specific hand protection recommended.
Hygiene measures Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Wash
contaminated clothing before reuse.
Respiratory protection No specific recommendations. Provide adequate ventilation. Large Spillages: If ventilation is inadequate,
suitable respiratory protection must be worn.
Environmental exposure controls Not regarded as dangerous for the environment.
3/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance Deliquescent solid.
Colour Grey.
Odour Almost odourless.
Odour threshold Not applicable.
pH Not applicable.
Melting point 95°C
Initial boiling point and range No information available.
Flash point Not applicable.
Evaporation rate No information available.
Evaporation factor No information available.
Flammability (solid, gas) The product is not flammable.
Upper/lower flammability or Not applicable.
explosive limits
Other flammability Not applicable.
Vapour pressure No information available.
Vapour density No information available.
Relative density 1.0 @ 20°C
Bulk density No information available.
Solubility(ies) Insoluble in water.
Partition coefficient No information available.
Auto-ignition temperature No information available.
Decomposition Temperature No information available.
Viscosity Inconclusive data.
Explosive properties Non-Explosive
Explosive under the influence of a Not considered to be explosive.
flame
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity See the other subsections of this section for further details.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under the prescribed
storage conditions.
10.3. Possibility of hazardous reactions
Possibility of hazardous reactions No potentially hazardous reactions known.
4/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
10.4. Conditions to avoid
Conditions to avoid There are no known conditions that are likely to result in a hazardous situation.
10.5. Incompatible materials
Materials to avoid No specific material or group of materials is likely to react with the product to produce a hazardous
situation.
10.6. Hazardous decomposition products
Hazardous decomposition Does not decompose when used and stored as recommended. Thermal decomposition or combustion
products products may include the following substances: Harmful gases or vapours.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity - oral
Summary Based on available data the classification criteria are not met.
Acute toxicity - dermal
Summary Based on available data the classification criteria are not met.
Acute toxicity - inhalation
Summary Based on available data the classification criteria are not met.
Skin corrosion/irritation
Summary Based on available data the classification criteria are not met.
Serious eye damage/irritation
Summary Based on available data the classification criteria are not met.
Respiratory sensitisation
Summary Based on available data the classification criteria are not met.
Skin sensitisation
Summary Based on available data the classification criteria are not met.
Germ cell mutagenicity
Summary Based on available data the classification criteria are not met.
Carcinogenicity
Summary Based on available data the classification criteria are not met.
IARC carcinogenicity None of the ingredients are listed or exempt.
Reproductive toxicity
Summary Based on available data the classification criteria are not met.
Specific target organ toxicity - single exposure
Summary Based on available data the classification criteria are not met.
Specific target organ toxicity - repeated exposure
Summary Based on available data the classification criteria are not met.
Aspiration hazard
Summary Not relevant. Solid.
General information No specific health hazards known. The severity of the symptoms described will vary dependent on the
concentration and the length of exposure.
Inhalation A single exposure may cause the following adverse effects: Temporary irritation. During application and
drying, solvent vapours will be emitted. Vapours in high concentrations are narcotic.
5/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
Ingestion May cause discomfort if swallowed.
Skin contact Prolonged contact may cause dryness of the skin. Bonds skin and eyes in seconds.
Eye contact May be slightly irritating to eyes. Bonds skin and eyes in seconds.
Route of exposure Ingestion Inhalation Skin and/or eye contact
Target organs No specific target organs known.
SECTION 12: Ecological information
Ecotoxicity Not regarded as dangerous for the environment. However, large or frequent spills may have hazardous
effects on the environment.
12.1. Toxicity
Acute aquatic toxicity
Summary Based on available data the classification criteria are not met.
Chronic aquatic toxicity
Summary Based on available data the classification criteria are not met.
12.2. Persistence and degradability
Persistence and degradability The degradability of the product is not known.
12.3. Bioaccumulative potential
Bioaccumulative potential No data available on bioaccumulation.
Partition coefficient No information available.
12.4. Mobility in soil
Mobility The product is insoluble in water.
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Other adverse effects None known.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
General information The generation of waste should be minimised or avoided wherever possible. Reuse or recycle products
wherever possible. This material and its container must be disposed of in a safe way.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste
Disposal Authority.
SECTION 14: Transport information
General The product is not covered by international regulations on the transport of dangerous goods (IMDG, IATA,
ADR/RID).
14.1. UN number
Not applicable.
14.2. UN proper shipping name
Not applicable.
14.3. Transport hazard class(es)
No transport warning sign required.
14.4. Packing group
6/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
Not applicable.
14.5. Environmental hazards
Environmentally hazardous substance/marine pollutant
No.
14.6. Special precautions for user
Not applicable.
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78 and
the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations Health and Safety at Work etc. Act 1974 (as amended).
The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 (SI
2009 No. 1348) (as amended) ["CDG 2009"].
EH40/2005 Workplace exposure limits.
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006
concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (as
amended).
Commission Regulation (EU) No 2015/830 of 28 May 2015.
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on
classification, labelling and packaging of substances and mixtures (as amended).
15.2. Chemical safety assessment
No chemical safety assessment has been carried out.
Inventories
EU - EINECS/ELINCS
None of the ingredients are listed or exempt.
SECTION 16: Other information
Abbreviations and acronyms used ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
in the safety data sheet ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland
Waterways.
RID: European Agreement concerning the International Carriage of Dangerous Goods by Rail.
IATA: International Air Transport Association.
ICAO: Technical Instructions for the Safe Transport of Dangerous Goods by Air.
IMDG: International Maritime Dangerous Goods.
CAS: Chemical Abstracts Service.
ATE: Acute Toxicity Estimate.
LC₅₀: Lethal Concentration to 50 % of a test population.
LD₅₀: Lethal Dose to 50% of a test population (Median Lethal Dose).
EC₅₀: 50% of maximal Effective Concentration.
PBT: Persistent, Bioaccumulative and Toxic substance.
vPvB: Very Persistent and Very Bioaccumulative.
Training advice Read and follow manufacturer's recommendations.
Revision date 15/09/2020
Revision 6
Supersedes date 30/10/2019
7/8
Revision date: 15/09/2020 Revision: 6 Supersedes date: 30/10/2019
Hot Melt Glue Stick
According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830
of 28 May 2015.
SDS number 124
This information relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and reliable as of the date
indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or completeness. It is the user's responsibility
to satisfy himself as to the suitability of such information for his own particular use.
8/8
