HOTO Smart

Laser Measure Pro

01 Product Overview
Please read this manual carefully before using the product and keep it for
future reference.
Thank you for using HOTO Smart Laser Measure Pro.

1
2

3 1 Laser receiver lens

4 2 Laser emission lens
3 Display
Mode switching
4
button
Power/
5
Measure button
5

6 Metal lanyard hole

6 7 Type-C charging port
7

1
02 Display

1 2 3 4

Measuring basis/
1 Laser emission alert 5
2 Battery indicator
3 Bluetooth connection 6
4 Measuring angles in real time
5 Measurement history - Group 1 7
6 Measurement history - Group 2
Measurement history - Group 3
8
7
8 Real-time measurement data 9
9 Measurement unit

2
03 How to Use
Turning on/off
Power-on: In the power-off state, pressing the power/measure button for more
than 1s will start the tool. The display will light up and enter test mode.
Power-off: In the power-on state, pressing the power/measure button for more
than 3s will turn off the tool.
If the product is inactive for 180s, it will automatically turn off.

Vibration
The instrument vibrates once when it is manually powered on/off.
The instrument vibrates once when the switch is flipped to change modes.
The instrument vibrates once when the measurement is finished.

Mode switching
Flip the switch down to change modes in turn:
Distance Measurement＞Angle Measurement＞Angles and Height
Measurement＞ Size Measurement＞Virtual Scale. Flip the switch upwards to
change modes in reverse order.

Measuring distance
After starting the product, short press the power/measure button, and the
tool will emit a laser and measure the distance. The present distance will be
displayed in real time.
Press the power/measure button again to stop laser emission. The fixed
numbers show measurement values.

3
Measuring angles
Flip the switch up or down to launch the Angle Measuring mode. Angle is
displayed in real time.
Press the power/measure button again to stop laser emission. Numbers will
stop to show measurement values.
Measuring angles and height
Flip the switch up and down to initiate the Angle and Height Measurement
mode.
Short press the measure button once to emit laser. The measurement will be
conducted in real time and seen on the display.
Press the measure button again to stop laser emission. The number will stop
and show the measurement data of a triangle's hypotenuse and inclination.
After measuring the hypotenuse and inclination, the instrument will
automatically calculate the height and horizontal distance.
To continue the measurement, short press the measure button again.
Measuring size
Flip the switch up or down to enter the Size Measurement mode.
Short press the measure button once to emit laser. The measurement will be
conducted in real time and seen on the display. Press the measure button
again to stop laser emission. The measurement shows the rectangle's length.
Use the same method to measure the rectangle's width, and the instrument
will automatically calculate the rectangle's size.
To continue the measurement, short press the measure button again.
4
Virtual scale
Flip the switch up or down to launch the Virtual Scale mode.
Short press the measure button once to emit laser. The measurement will be
conducted in real time. The default unit is cm.
Press the power/measure button again to stop laser emission, and the
number will stop and show the measurement data.
The minimum adjustable length is 0.2 m and the maximum length is 50 m.

Measuring distance Measuring angles Measuring angles Measuring size Virtual scale
and height

Connecting to the HOTO app

Scan the product's QR code or search for "HOTO
app" in your app store. Download and install the
HOTO app. If the app was previously installed, you
will be directed to the device connection page.

5
Bluetooth connection
Bluetooth is on by default and cannot be turned off manually. The sceen will
show a " ".
Bluetooth will automatically turn on once when product is started, displaying
a flashing " " icon flashing. The HOTO app will automatically search for
devices to pair with.
When the product is started, open the HOTO app and click the upper right
corner to add a device. Follow the steps, and the " " will be permanently lit
on when the connection is successful.
If the connection fails within 180s, Bluetooth will automatically turn off to
save energy.
Note: HOTO Smart Laser Measure Pro has a non-independent and complete
Bluetooth module with CMIIT ID: 2020DP2859.

Tips
If the QR code cannot be scanned, please search for the product name to add
the device.
Due to updates on the HOTO app, the actual operation may slightly differ from
the description provided above. Please follow the indications on the app.
Switching reference plane
By default, the reference plane of the product is the end reference " ". So
please use the product end " " as the reference plane. To use the front
reference " ", please switch the reference plane in Product Settings -
Rangefinder Settings in the app.

6
Changing measurement units
The product supports three measurement units, with "m" (meters) by default.
Length units: 0.000m, 0.000ft, 0' 00'' 1/16
Size units: 0.000m^2, 0.000ft^2, 0.000ft^2
To use ft (foot) or 0' 00'' 1/16 (foot, inch, 1/16), please switch the measurement
units in Product Settings found in the app.

Bluetooth reset
When the laser measure is on/off, press and hold the power/measure button
for 7 seconds, and the screen displays "RESET" and " " to reset the product's
Bluetooth network configuration information

Charging
This rangefinder is equipped with a universal Type-C charging port and
comes with a USB charging cable.
If it has not been used for a long time, fully charge the product before use.
The tool does not measure during the charging process.

7
 04 Warnings
Warnings!
Read the safety and operating instructions carefully before using the
laser measure for the first time.
Read the safety and operating instructions carefully before use. Failure to use
the laser measure in accordance with the instructions indicated by this user
manual will lead to damage to the laser measure, decreased measurement
accuracy, or injuries to users or other people.
Do not use any methods to disassemble or repair the laser measure on your
own. Never illegally modify or change the laser emi ing performance of the
laser measure. Properly store the laser measure and keep it out of reach of
children and unrelated people.
Do not point the laser light at your eyes and other body parts or those of
other people. Never aim the laser light at the surfaces of highly reflective
objects.
Do not use the laser measure near aircra or medical equipment, or use it in a
flammable or explosive environment, because the electromagnetic radiation
of this laser measure may interfere with other devices.
Do not dispose of used ba eries and unusable laser measures with household
waste. Dispose of them per national or local laws and regulations.

LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Maximum output of laser radiation<1 mW
LASER
wavelength 630‒680 nm 2
IEC 60825‒1:2014; EN 60825‒1:2014

8
 All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and
the environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment, appointed
by the government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. Please contact the installer or local authorities for more information
about the location as well as terms and conditions of such collection points.

We Shanghai HOTO Technology Co., Ltd., hereby, declares that this

equipment is in compliance with the applicable Directives and European
Norms, and amendments.

Federal Communications Commission Supplier’s

Declaration of Conformity
This supplier’s declaration of conformity is hereby for
Product: HOTO Smart Laser Measure Pro
Model Number(s): H-D50
Brand/Trade: HOTO
We declare that the above mentioned device has been tested
and found in compliance with CFR 47 Part 15 Regulation.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
9
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Representative of Responsible Party for SDoC
Company: HOTO (US) TECHNOLOGY CO LTD
Address: 919 North Market Street, Suite 950, Wilmington DE 19801
Country: U.S.A.
Customer Service(US): +1 855-577-2659
Mon-Fri 9:00am-5:00pm(CST)
FCC Warning:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
10
05 Troubleshooting
When the product is in use, the following indicators may appear in the main
display area:

Error Cause Solution

Quick flashing of
the lightning bolt The battery level is low. Charge the laser measure.
sign
Unable to charge Charging temperature It is recommended to charge
protection at a normal temperature of
about 25℃.
The laser reflective signal Measure a target with high
is too weak (such as when reflectivity or use the laser
measuring black surfaces). measure with a reflectiv
board.
Couldn't measure The laser reflective signal Measure a target with low
and the display is too strong (such as when reflectivity or use the laser
shows "-.---". measuring highly reflectiv measure with a reflectiv
surfaces). board.
Out of the operating Use the laser measure
temperature range within the specified t
emperature range.
Out of measurement range Use the laser measure within
the measurement range

11
06 Specifications
Model: H-D50 Charging Input: 5 V 1 A
Measurement Range: 0.05—50 m Operating Power: 1 W(MAX.)
Measurement Accuracy: Charging Time: Approx. 100 min
±（2 mm+D*1/10000） Automatic Turn-off Time: 180 s
Analog Ruler Scale Accuracy： Automatic Laser Off Time: 180 s
±（4 mm+D*1/10000） Operating Temperature: -10°C to 50°C
Minimum Displaying Unit: 0.001 m Storage Temperature: -20°C to 60°C
Measurement Unit: m/ft Storage Humidity: 20%‒80% RH
Laser Type: 630‒680 nm wavelength Item Dimensions: 99.5×44.1×23.3 mm
Lithium-ion Battery: 3.7 V 850 mAh Net Weight: Approx. 90 g
Display Screen: 1.77-inch LCD screen luetooth Transmission Distance: Approx. 8 m

* In the analog ruler mode, the test accuracy is ±4mm.

* "D" refers to the actual distance in an indoor environment with standard
reflectiv surfaces.
All data produced by this product vary slightly due to different actual
measurement environments and should depend on users’actual measurements.
The rangefinder is appropriate for indoor measurements. The measurement
results will have relatively wide discrepancies in such harsh environments as
extremely strong sunlight or excessively fluctuated temperature, weak reflective
surfaces, and low battery power. The measuring range of 0.05m is the minimum
measurable distance using head-based reference mode.
Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No.50 Moganshan Road, Shanghai, China

12
 DECLARATION OF CONFORMITY

EU Declaration of Conformity
We
Shanghai HOTO Technology Co., Ltd.
Declare that the product:
HOTO Smart Laser Measure Pro / H-D50
Complies with the essential health and safety requirements of the following directives:
2014/53/EU The Machinery Directive
References to the following harmonized standard were made:
EN 62479:2010
EN 61010-1:2010
ETSI EN 301 489-1 V2.2.3:2019
ETSI EN 301 489-17 V3.2.2:2019
EN 61326-1:2013
EN 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
ETSI EN 300 328 V2.2.2:2018
2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Authorised signatory and technical file holder:
Shanghai HOTO Technology Co., Ltd.
Building 45, No.50 Moganshan Road, Shanghai, China

13