10/100BASE-T SINGLE PORT,

SMT TRANSFORMER
For Fast Ethernet to Gigabit Ethernet
Interchangeable Designs

Meets IEEE802.3 and ANSI X3.263 standards,

including 350 µH OCL with 8 mA DC bias
Pin-compatible to Pulse Gigabit Ethernet part
numbers H5004 and H5007

Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C

Differential to Common
Turns Ratio Insertion Loss Return Loss Crosstalk
Part Mode Rejection Hipot
(±5%) (dB MAX) (dB MIN) (dB MIN)
Number (db MIN) (Vrms MIN)
Receive Transmit 100 kHz–100 MHz 30 MHz 60 MHz 80 Mhz 30 MHz 60 MHz 80 Mhz 30 MHz 60 MHz 100 MHz
H1267 1CT:1CT 1CT:1CT -1.0 -16 -12 -12 -40 -40 -35 -42 -37 -33 1500

Mechanical
H1267 .550
13,97 .050
11X
1,27
.030
.690 24X
0,76
17,53

.500 .650
.480 .630 12,70 16,51
12,20 16,00
DATE CODE CNTRY OF MFG

.050
11X
1,27 .020
24X
0,51
.550
13,97 .225
5,51

.004
.010
24 SURFACES .045 0°–8°
0,25 24X
1,14

Dimensions: Inches
mm
Unless otherwise specified all tolerances are ± .010 . Weight . . . . . . . . . .2.7 grams
0,25 Tape & Reel . . . . . . .300/reel
When ordering Tape & Reel packaging add the suffix “T” to the part number, such as “H1267T.” Tube . . . . . . . . . . . . .25/tube

USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 5538070 • Taiwan 886 2 26980228
www.pulseeng.com 1 H342.B (8/05)
10/100BASE-T SINGLE PORT,
SMT TRANSFORMER
For Fast Ethernet to Gigabit Ethernet
Interchangeable Designs

Schematic
H1267

21 RCT
24 TCT

23 TX+

19 RX-
20 RX+
22 TX-

18

17

16

15

14

13
1:1
TRANSMIT

RECEIVE
1:1

TD- 3
TDC 1

TD+ 2

RDC 4

RD+ 5

RD- 6

Application Notes

The Fast Ethernet to Gigabit Ethernet interchangeable Presently, if a network design engineer wants to design a
design is a design concept that allows design engineers 10/100 card, he would have to choose a 10/100
to design a network applications board that can support transformer. If the engineer wants to design a gigabit
both Fast Ethernet (10/100Base-T) and Gigabit Ethernet card, he would have to choose a gigabit transformer. This
(1000Base-T) applications by simply replacing several leads to two different designs (board layout) for two
components without having to re-design the whole board. different applications.
Two components that play a part in this design are the The objective of interchangeable design is to allow the
Ethernet silicon and the transformer. Both the silicon and engineer to utilize the same design (and board layout) for
the transformer for both 10/100 and gigabit must have 10/100 and for a gigabit design (and vice versa) with
footprint compatibility. This footprint compatibility will minimal change as possible to the design.
mean a single board layout for the interface between the
Ethernet silicon and the transformer of either 10/100 or
gigabit applications.

USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 5538070 • Taiwan 886 2 26980228
www.pulseeng.com 2 H342.B (8/05)
10/100BASE-T SINGLE PORT,
SMT TRANSFORMER
For Fast Ethernet to Gigabit Ethernet
Interchangeable Designs

Application Circuit
H1267

Fast Ethernet Circuit

CHIP SIDE CABLE SIDE

2
3
4

5
6
7

8
(2X 0.01 µF)
H1267
4X 75 W
EFI Capicitor
(1000 pF, 2 kV)

The above circuit is a simple interface for a Fast Ethernet tranformer connecting to both the Fast Ethernet silicon and the RJ-45 connector. In order
to design a gigabit application, simply replace the Fast Ethernet Silicon, the Fast Ethernet transformer and the rest of the passive components with a
gigabit ethernet silicon, a gigabit transformer and the rest of the passive components.
It is highly recommended that the cable side Center Taps of each transformer be terminated to 75 Ω resistors and that the four center taps be
terminated to an EFI capacitor prior to ground termination.

USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 5538070 • Taiwan 886 2 26980228
www.pulseeng.com 3 H342.B (8/05)
10/100BASE-T SINGLE PORT,
SMT TRANSFORMER
For Fast Ethernet to Gigabit Ethernet
Interchangeable Designs
Application Circuit
H5004
Gigabit Circuit
CHIP SIDE CABLE SIDE

2
3
4

5
6
7

8
(4X 0.01 µF)
H5004 4X 75 W
EFI Capicitor
(1000 pF, 2 kV)

The above circuit is a simple interface for a gigabit transformer connectiong to both the Gigabit Ethernet silicon and the RJ-45 connector.
It is highly recommended that the cable side Center Taps of each transformer be terminated to 75 Ω resistors and that the four center taps be
terminated to an EFI capacitor prior to ground termination.

USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 769 5538070 • Taiwan 886 2 26980228
www.pulseeng.com 4 H342.B (8/05)
10/100BASE-T SINGLE PORT,
SMT TRANSFORMER
For Fast Ethernet to Gigabit Ethernet
Interchangeable Designs
Application Circuit
H5007
Gigabit Circuit
CHIP SIDE CABLE SIDE

2
3
4

5
6
7

8
(4X 0.01 µF) H5007 4X 75 W

EFI Capicitor
(1000 pF, 2 kV)

The above circuit is a simple interface for a gigabit transformer connectiong to both the Gigabit Ethernet silicon and the RJ-45 connector.
It is highly recommended that the cable side Center Taps of each transformer be terminated to 75 Ω resistors and that the four center taps be
terminated to an EFI capacitor prior to ground termination.

For More Information:

Pulse Worldwide Pulse Pulse Pulse Pulse North China Pulse South Asia Pulse North Asia
Headquarters Northern Europe Southern Europe China Headquarters Room 1002 150 Kampong Ampat 3F-4, No. 81, Sec. 1
12220 World Trade Drive 3 Huxley Road Zone Industrielle No. 1 No. 819 #07-01/02 Hsin Tai Wu Road
San Diego, CA 92128 Surrey Research Park F-39270 Industrial District Nanjing West Rd KA Centre Hsi-Chih
U.S.A. Guildford, Surrey GU2 5RE Orgelet Changan, Dongguan Shanghai Singapore 368324 Taipei Hsien
www.pulseeng.com United Kingdom France China China Taiwan
TEL: 858 674 8100 TEL: 44 1483 401700 TEL: 33 3 84 35 04 04 TEL: 86 769 5538070 TEL: 86 21 32181071 TEL: 65 6287 8998 TEL: 886 2 26980228
FAX: 858 674 8262 FAX: 44 1483 401701 FAX: 33 3 84 25 46 41 FAX: 86 769 5538870 FAX: 86 21 32181396 FAX: 65 6280 0080 FAX: 886 2 26980948
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2005. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com 5 H342.B (8/05)