Gulf Security
Industrial bearing and circulating oils
Product Description
Gulf Security series are industrial bearing and circulating oils primarily intended for lubrication of circulating systems,
total loss systems, low or moderately loaded enclosed gears and air compressors where a straight mineral oil is
recommended. These oils are blended from high quality, solvent refined paraffinic base oil and anti-foam agents. They
possess inherent resistance to oxidation, high viscosity index, low carbon forming tendency, superior foam control and
good water separating capabilities. These oils are available in ISO 100 through ISO 680 viscosity grades.
Features & Benefits
Inherent resistance to oxidation minimises sludge & varnish formation and resists oil degradation
High Viscosity Index ensures small changes of viscosity with change of temperature
Superior foam control avoids pump cavitation and maintains circulation efficiency
Good water separating capability promotes separation of water in reservoir and prevents it from recirculating with
the oil
Applications
Wide variety of following industrial applications requiring straight mineral oils:
1. Circulatory systems
2. Total loss systems
3. Low or moderately loaded enclosed gears not requiring EP or anti-wear properties
4. Air compressors
5. Plain and rolling element bearings
6. Sealing lubricant in high temp. applications of steel & heavy duty industries like gas holder.
Specifications, Approvals & Typical Properties
ISO Viscosity grades 100 150 220 320 460 680
Typical Properties
Test Parameters ASTM Method Test Values
Viscosity @ 40 ºC, cSt D 445 98.3 148.9 221 321.1 467 685
Viscosity Index D 2270 97 96 96 95 95 92
Flash Point, ºC D 92 230 246 256 266 280 290
Pour Point, ºC D 97 -12 -9 -6 -6 -3 0
Density @ 15ºC, Kg/l D 1298 0.886 0.89 0.894 0.898 0.902 0.915
Emulsion Test 30 minutes max @ 82ºC D 1401 Pass Pass Pass Pass Pass Pass
Foam Test, foam after 10 minutes
D 892 Nil Nil Nil Nil Nil Nil
of settling for all sequences
October ‘24
Properties mentioned are typical only and minor variations, which do not affect product performance, are expected to arise in normal manufacturing processes. Please follow equipment
manufacturer’s recommendations for performance level and viscosity grade. The Safety Data Sheet for this product is available from your nearest Gulf Distributor. Please consult our local
representative if any further information is required.
The information contained herein is believed to be correct at the time of publication and may be subject to modification from time to time. It is the user's responsibility to verify that this data sheet is
current prior to using the product. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of products. Gulf Oil International reserves the right to
modify and change its products and specifications without prior notice.
This data sheet has been issued by us in English language only. In the event of any discrepancy between the English language version and any other language version, the English language
version shall prevail.
www.gulfoilltd.com
