Product data sheet
Specifications
motion servo drive, Lexium 32, 3A,
three phase, supply voltage 208 to
480V, 0.9kW
LXM32SD12N4
Product availability: Stock - Normally stocked in distribution
facility
Main
Range of Product Lexium 32
Device short name LXM32S
Product or Component Type Motion servo drive
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Format of the drive Book
Phase Three phase
[Us] rated supply voltage 200...240 V - 15...10 %
380...480 V - 15...10 %
Supply voltage limits 170…264 V
323…528 V
Supply frequency 50/60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
EMC filter Integrated
Continuous output current 3 A 8 kHz
Output current 3s peak 12 A 208 V 5 s
12 A 480 V 5 s
Continuous power 800 W 208 V
1600 W 400 V
1600 W 480 V
Nominal power 0.7 kW 208 V 8 kHz
0.9 kW 400 V 8 kHz
0.9 kW 480 V 8 kHz
Line current 3.1 A 79 % 208 V, with external line choke 2 mH
3.4 A 90 % 400 V, with external line choke 2 mH
2.9 A 98 % 480 V, with external line choke 2 mH
3.6 A 136 % 208 V, without line choke
2.9 A 177 % 400 V, without line choke
2.4 A 182 % 480 V, without line choke
Complementary
Switching frequency 8 kHz
Overvoltage category III
Maximum leakage current 30 mA
Output voltage <= power supply voltage
Electrical isolation Between power and control
Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR
Electrical connection Terminal 3 mm², AWG 12 CN8)
Tightening torque CN8 4.4 lbf.in (0.5 N.m)
Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Jul 22, 2025 1
Discrete input number 2 capture
Discrete input type Capture CAP
Sampling duration 0.25 ms
Discrete input voltage 24 V DC capture
Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2
type 1
Response time <= 5 ms compliment of STO_A, compliment of STO_B
Discrete output number 3
Discrete output type Logic DO)24 V DC
Discrete output voltage <= 30 V DC
Discrete output logic Positive or negative DO)EN/IEC 61131-2
Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B
Braking current 50 mA
Response time on output 250 µs DO)discrete
Safety function STO (safe torque off), Integrated
Safety level SIL 3 EN/IEC 61508
Communication interface SERCOS III, Integrated
Status LED 1 LED (Red) servo drive voltage
Signalling function Display of faults 7 segments
Marking CE
Operating position Vertical +/- 10 degree
Product compatibility Servo motor BMH 2.8 in (70 mm), 1
Width 2.7 in (68 mm)
Height 10.6 in (270 mm)
Depth 9.3 in (237 mm)
Net Weight 4.2 lb(US) (1.9 kg)
Environment
Electromagnetic compatibility Conducted EMC EN 55011 class A group 1
Standards EN/IEC 61800-3
Product Certifications CSA
IP degree of protection IP20 conforming to EN/IEC 60529
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
Shock resistance 15 gn 11 ms EN/IEC 60028-2-27
Pollution degree 2 EN/IEC 61800-5-1
Environmental characteristic Classes 3C1 conforming to IEC 60721-3-3
Relative humidity Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Ambient air temperature for 32…122 °F (0…50 °C) UL
operation
Ambient Air Temperature for -13…158 °F (-25…70 °C)
Storage
type of cooling Integrated fan
Operating altitude <= 3280.84 ft (1000 m) without derating
2 Jul 22, 2025
Ordering and shipping details
Category US1PC5118261
Discount Schedule PC51
GTIN 3606480694745
Returnability Yes
Country of origin ID
Packing Units
Unit Type of Package 1 PCE
Nbr. of units in pkg. 1
Package 1 Height 4.17 in (10.600 cm)
Package 1 Width 10.83 in (27.500 cm)
Package 1 Length 12.99 in (33.000 cm)
Package weight(Lbs) 5.478 lb(US) (2.485 kg)
Unit Type of Package 2 S03
Number of Units in Package 2 2
Package 2 Height 11.81 in (30.000 cm)
Package 2 Width 11.81 in (30.000 cm)
Package 2 Length 15.75 in (40.000 cm)
Package 2 Weight 12.500 lb(US) (5.670 kg)
Unit Type of Package 3 P06
Number of Units in Package 3 16
Package 3 Height 29.53 in (75.000 cm)
Package 3 Width 23.62 in (60.000 cm)
Package 3 Length 31.50 in (80.000 cm)
Package 3 Weight 119.006 lb(US) (53.980 kg)
Contractual warranty
Warranty 18 months
Jul 22, 2025 3
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity
via our ongoing “Use Better, Use Longer, Use Again” campaign to extend product lifetimes and recyclability.
Environmental Data explained
How we assess product sustainability
Environmental footprint
Carbon footprint (kg CO2 eq, Total Life cycle) 1612
Environmental Disclosure Product Environmental Profile
Use Better
Materials and Substances
Packaging made with recycled cardboard Yes
Packaging without single use plastic Yes
Pro-active compliance (Product out of EU RoHS legal
EU RoHS Directive
scope)
SCIP Number C0961927-b9e6-4f64-bd63-334df07b6de6
REACh Regulation REACh Declaration
WARNING: This product can expose you to chemicals
including: Lead and lead compounds, which is known to
California proposition 65 the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
PVC free Yes
Use Again
Repack and remanufacture
Circularity Profile End of Life Information
Take-back No
The product must be disposed on European Union
WEEE markets following specific waste collection and never end
up in rubbish bins.
4 Jul 22, 2025
Product data sheet LXM32SD12N4
Dimensions Drawings
Lexium 32 Servo Drive
Dimensions
Jul 22, 2025 5
Product data sheet LXM32SD12N4
Mounting and Clearance
Lexium 32 Motion Control Servo Drives
Mounting Recommendations
LXM32•U45M2, •U90M2 and LXM32•U60N4 servo drives are cooled by natural convection. LXM32•D18M2, •D30M2,
LXM32 •D12N4, •D18N4, •D30N4 and •D72N4servo drives have an integrated fan.
When installing the servo drive in the enclosure, follow the instructions below with regard to the temperature and
protection index:
• Provide sufficient cooling of the servo drive
Do not mount the servo drive near heat sources
• Do not mount the servo drive on flammable materials
• Do not heat the servo drive cooling air by currents of hot air from other equipment and components, for
• example from an external braking resistor
• Mount the servo drive vertically (± 10%)
• If the servo drive is used above its thermal limits, control stops due to overtemperature
NOTE: For cables that are connected via the underside of the servo drive,
a free space ≥ 200 mm/7.87 in. is required under the unit to comply with
the bending radius of the connection cables.
Ambient temperature Mounting distances Instructions to be followed
0°C…+ 50°C d ≥ 0 mm –
+ 50°C…+ 60°C d ≥ 0 mm Reduce the output current by 2.2% per °C above 50°C
NOTE: Do not use insulated enclosures, as they have a poor level of
conductivity.
Recommendations for Mounting in an Enclosure
To ensure good air circulation in the servo drive:
• Fit ventilation grilles on the enclosure.
• Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.
6 Jul 22, 2025
Product data sheet LXM32SD12N4
(1) Natural convection
(2) Forced ventilation
• Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to
characteristics).
• Use special filters with IP 54 protection.
Mounting in Metal Enclosure (IP 54 Degree of Protection)
The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as
dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases,
Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.
Jul 22, 2025 7
