RELIANCE

Taxiway Edge, L-861T(L)

Omnidirectional elevated

Compliance with Standards Operating Conditions

L-861T(L) AC 150/5345-46 (Current Edition) and the FAA Temperature: -40 °F to +131 °F / -40 °C to +55 °C
FAA:
Engineering Brief No. 67. ETL Certified.
Withstands wind velocities up to 300 mph / 480
Wind:
Annex 14, Vol. 1, para. 5.3.17; 5.3.18 (for photometry) kph
ICAO: Chromaticity - Appendix 1, Section 2.3.1 (Blue LED)
Frangibility - Section 5.3.1.6 Power Supply

Current Driven
Uses
RELIANCE LED lights have been designed to work with any IEC or FAA-
Taxiway edge fixture is used to delineate the edges of airport compliant transformer up to 100 W without affecting performance or
taxiways. lifetime of the light or the transformer.

FAA Optional monitoring function of the individual light source. In case of

• Taxiway Edge L-861(L) a defect, the LED light automatically disconnects from the secondary
side of the isolation transformer, resulting in an open circuit
ICAO condition.
• Taxiway Edge
Note: The power usage is the same for the version with Monitoring.
Features
ETES Fixture Fixture Isolation Isol. XF
CCR Load
• Average LED life of 100.000 hours under high-intensity w/ heater Load Transfmr. Load
conditions and more than 180.000 hours under typical operating
Off 12 VA 20/25 W 7.5 VA 19.5 VA
conditions, which significantly reduces ongoing maintenance
costs and periodic re-lamping expenses. Off 12 VA 30/45 W 8.4 VA 20.4 VA
• The RELIANCE® taxiway edge fixture with heater fixture MTBF is On 25 VA 20/25 W 7.5 VA 32.5 VA
at least 180.000 operating hours.
On 25 VA 30/45 W 9 VA 34 VA
• UV-resistant polycarbonate outer lens option minimizes risk of
lens damage if fixture is knocked over. ETES Fixture Fixture Isolation Isol. XF
CCR Load
w/out heater Load Transfmr. Load
• Isolation transformers are available for use with the fixtures to
match fixture load for optimal efficiency. Off 12 VA 10/15 W 3 VA 15 VA
• Rugged low-profile design reduces damage due to jet blast. Off 12 VA 30/45 W 8.4 VA 20.4 VA
• Provides ±4.5° vertical adjustment.
• Aluminum casting, stainless steel hardware, and protected with Voltage Driven
aviation yellow powder coat finish. Locking ring is protected with
aviation blue powder coat finish. Input voltage: 95 VAC (min.) - 264 VAC (max.), 50/60 Hz
Maximum input
power 10.2 VA
(w/out heater):
Maximum input
power 25.2 VA at 120 VAC
(w/heater):

DS-2050_v3.2 1
RELIANCE
Packaging

Dimensions of Cartons Indiv.

Assembled 1
Individual in / 15 per box in / Weight lb
Fixtures
cm cm / kg

19.5 × 23.5 ×
20.5 × 6.5 × 6.5 / 2.75 lb
14-inch OAH 15.75 /
52 × 16.5 × 16.5 1.25 kg
50 × 60 × 52
29. 5 × 23.5 ×
31 × 6.5 × 6.5 / 4 lb
24-inch OAH 15.75 /
79 × 17 × 17 1.81 kg
75 × 60 × 40
37 × 6.5 × 6.5 / 36 × 23.5 × 15.7 / 4.75 lb
30-inch OAH
94 × 16.5 × 16.5 91.5 × 60 × 40 2.15 kg

1 Weight based on unpackaged fixture with arctic option.

DS-2050_v3.2 2
 RELIANCE
Ordering Code Notes

Fixture Height

Arctic Option
1. Not Submitted for ETL testing.
LED Color

2. When powered by a parallel circuit, heater is designed for use at

Version
Power
only 120 VAC, +/- 10%, 50/60Hz.
3. Configuration sold with no column and no coupling.

ETES/ ☐☐☐☐☐☐☐ 4. Normally used in metric applications.

5. If digit 7 = M, digit 9 must be = C.

LED Color 6. No column or frangible coupling.

1 = Blue (Glass)
1
2 = Red (special applications only)
1
3 = White (special applications only)
1
4 = Green (special applications only)
1
5 = Yellow (special applications only)
6 = Blue (UV-resistant Polycarbonate)
1
9 = Yellow (UV-resistant Polycarbonate)
1
A = Red (UV-resistant Polycarbonate)
Fixture Height
1,4
R = ICAO <350mm OAH (2" coupling), 11.5 TPI
1,4
W = ICAO <350mm OAH (2" coupling), 11 TPI
1,3
0 = 14" OAH without coupling
1 = 14" OAH (1.5" coupling), 12 TPI
2 = 24" OAH (1.5" coupling), 12 TPI
3 = 30" OAH (1.5" coupling), 12 TPI
4 = 14" (2" coupling), 11.5 TPI
5 = 24" OAH (2" coupling), 11.5 TPI
6 = 30" OAH (2" coupling), 11.5 TPI
1,4
7 = 14" OAH (2" coupling), 11 TPI
1,4
8 = 24" OAH(2" coupling), 11 TPI
1,4
9 = 30" OAH (2" coupling), 11 TPI
16
A = Style 6 cord
1
B = 14" OAH (1.5" slot coupling)
1
C = 24" OAH (1.5" slot coupling)
1
D = 30" OAH (1.5" slot coupling)
1
E = 14" OAH (1.5" x 2" slot coupling), 11.5 TPI
1
F = 24" OAH (1.5" x 2" slot coupling), 11.5 TPI
1
G = 30" OAH (1.5" x 2" slot coupling), 11.5 TPI
136
H = Style 1 cord
L = 14" OAH (2" coupling), 11.5 TPI, 22" cordset
1
M = 18" OAH (1.5" x 2" slot coupling), 11.5 TPI
N = 18" OAH (1.5" coupling)
P = 18" OAH (2" coupling), 11.5 TPI
1,4
Q = 18" OAH (2" coupling), 11 TPI
S = 20" OAH (1.5" coupling)
1
T = 20" OAH (1.5" slot coupling)
1,4
U = 20" OAH (2" coupling), 11 TPI
V = 20" OAH (2" coupling), 11.5 TPI
Z = 16" OAH (1.5" coupling), 12 TPI
Power
1 = Current Driven, 50/60 Hz
1,5
M = Curent Driven, Monitored 50/60hz
3 = 95-264 VAC, 50/60 Hz
A = APS Advanced Power Supply
Arctic Option
0/1 = Without/With Arctic Option
Version
C = ROW Version
- = Not used for Buy American Preference
www.adbsafegate.com

Product specifications may be subject to change, and specifications listed here are not binding. Confirm current specifications at time of
order.
DS-2050_v3.2 3