FlexBreeze™ FAN

FA200 Series
OWNER’S GUIDE
 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
SUITABLE FOR OUTDOOR USE & HOUSEHOLD USE ONLY. SUITABLE FOR OUTDOOR USE & HOUSEHOLD USE ONLY.

WARNING CAR CHARGER FAN COVER

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: READ ALL THESE INSTRUCTIONS BEFORE USE.
1. This appliance is operated by a rechargeable battery. ONLY 27. Ensure the batteries are installed correctly according to polarity
1. SAVE THESE INSTRUCTIONS. READ ALL INSTRUCTIONS BEFORE USE
recharge the battery with the charger supplied with the unit, (+ and -).
battery charger for use only with model GQ36-120300-AUO 28. Do not mix old and new batteries, different brands or types This manual contains
The fan cover is not a toy. Children should not play with it as it
power supply from Dongguan Gangqi Electronics Co., Ltd. or of batteries, such as alkaline, carbon-zinc, or rechargeable important safety and
with model ZD036T120300US from E-TEK, or with model AJJ3-1 batteries. may become unsanitary during outdoor use.
operating instructions for
from Anlian. A charger that may be suitable for one type of 29. Remove and immediately recycle or dispose of batteries from
battery may create a risk of fire when used with another battery. battery charger model
equipment not used for an extended period of time according FA20XCAR from Dongguan
2. Do not attempt to destroy, remove, or disassemble the battery to local regulations.
pack from the machine. Do not incinerate battery cells. Consult 30. Always completely secure the battery compartment. If the
City Gangqi Electronics
your local waste authority for information regarding available battery compartment does not close securely, stop using the Co., Ltd.
recycling and/or disposal options. product, remove the batteries, and keep them away from
3. This appliance comes with a remote control which contains 2.  efore using this battery
B
children.
a coin battery. Dispose of batteries properly. Always keep charger, read all instructions
31. Do not apply any fragrance or scented products onto any part
batteries away from children (choke hazard). Even used of the fan during use or maintenance. and cautionary markings on
batteries can cause injury. the battery charger, battery,
WARNING: Not suitable for use with solid-state
4. To reduce the risk of electric shock, connect only to an outlet speed controls. and product using battery.
provided with a ground fault circuit interrupting (GFCI) device.
5. The fan should be used on a stable and level surface. LITHIUM BATTERY SAFETY WARNINGS 3.  AUTION: To reduce risk of injury, charge only the
C
6. Never use this fan near pools, bathtubs, showers, basins, or LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGY provided rechargeable battery. Other types of batteries
other vessels containing water. AND WILL VENT FIRE OR EXPLODE IF MISTREATED. may burst, causing injury to persons and damage.
7. Do not operate any unit with a damaged power supply wire 1. DO NOT DO ANY OF THE FOLLOWING TO THE BATTERY
4. Do not expose charger to rain, moisture, or snow.
or battery charger. Discard the unit or return to an authorized PACK:
service facility for examination and/or repair. a. Open d. Puncture 5.  se of an attachment not recommended or sold by the
U
8. Do not run cord under carpeting. Do not cover charge cord b. Drop e. Incinerate battery charger manufacturer may result in a risk of fire,
with throw rugs, runners, or similar coverings. Do not route c. Short-circuit f. Expose to temperatures electric shock, or injury to persons.
charger cord under furniture or appliances. Keep charger cord 2. Keep battery pack dry.
away from high-traffic areas. Place charger in an area where the 6. 
To reduce damage to car charger and cord, do not
cord will not be tripped over. 3. Charge battery pack only according to its charger's attempt to remove the charger from the outlet by pulling
9. If the charger cord is damaged, it should be replaced. instructions.
the cord. Pull the entire car charger connection from
10. This appliance is not intended for use by anyone (including 4. Inspect battery pack before every use: do not use or charge
if damaged. the outlet.
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they have been BATTERY REMOVAL AND DISPOSAL 7. 
To reduce risk of electric shock, unplug charger before
given supervision or instruction concerning use of the appliance This product contains an integral lithium battery (not replaceable), attempting any maintenance or cleaning. Turning off
by a person responsible for their safety. and the remote control uses a lithium coin battery. When the controls will not reduce this risk.
11. Children should be supervised to ensure that they DO NOT play remote battery no longer has a charge, it should be removed
with the appliance. from the remote and recycled. DO NOT incinerate or compost the 8. Do not operate the car charger if any components
12. Cleaning and user maintenance shall not be made by children product with its integral battery or the remote battery. When your are damaged.
without supervision. remote battery needs to be replaced, dispose of it or recycle it in
accordance with local ordinances or regulations. In some areas, it is 9. 
To clean the charger, first unplug it, then gently wipe
13. Prior to cleaning or other maintenance, the appliance must be
unplugged from the electrical outlet. illegal to place spent lithium batteries in the trash or in a municipal it with a damp cloth. Allow the charger to air-dry
solid waste stream. Return spent battery to an authorized recycling completely before using it.
14. Only use Shark™ branded accessories. center or to retailer for recycling. Contact your local recycling center
15. Do not use if appliance is not working as it should, or has been for information on where to drop off the spent battery. 10. 
The charger uses a replaceable 5-amp fuse. To remove
dropped, damaged, left outdoors, or dropped into water. the fuse, unscrew the chrome knob at the tip of the
16. Turn off all controls before plugging in or unplugging POWER SUPPLY SAFETY
the appliance. 1. Read and follow all instructions that are on the product charging plug. Use only 5-amp fuses for replacement.
17. Unplug from electrical outlet when not in use and before any or provided with the product.
maintenance or cleaning. 2. Do not use an extension cord. MISTING ACCESSORY
18. Hand wash exterior/hard plastic/non-electronic parts with 3. Do not use within 10 feet of pool and do not use in
water only. Do not immerse. Cleaning with chemicals could a bathroom.
damage the unit.
4. WARNING: Risk of Electric Shock. When used outdoors, install
19. Do not attempt to repair or adjust any electrical or mechanical only to a covered Class A GFCI protected receptacle that is
functions of this appliance, as this may cause danger and void weatherproof with the power unit connected to the receptacle.
the warranty. If one is not provided, contact a qualified electrician for
20. Remove and immediately recycle or dispose of used batteries proper installation. Ensure that the power unit and cord do not
according to local regulations and keep away from children. interfere with closing the receptacle cover.
Do NOT dispose of batteries in household trash or incinerate.
21. Even used batteries may cause severe injury or death. FCC WARNINGS
Note: This equipment has been tested and complies with the limits for a
22. Call a local poison control center for treatment information. Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
23. Compatible battery type is CR2025. designed to provide reasonable protection against harmful interference in
24. The nominal battery voltage is 3V. a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
25. Non-rechargeable batteries are not to be recharged. instructions, may cause harmful interference to radio communications. To see
26. Do not force discharge, recharge, disassemble, heat above if this equipment interferes with radio or television reception, try turning the
60°C, or incinerate. Doing so may result in injury due to venting, equipment off and on.
leakage, or explosion resulting in chemical burns. To correct any interference:

WARNING
• Reorient or relocate the receiving antenna. 1. 
The misting accessory is suitable for OUTDOOR 6. 
Keep non-waterproof electronic equipment and appliances
• Increase the distance between the equipment and the receiver. USE ONLY. out of the misting stream.
• Connect the equipment to a different outlet than the receiver. 2.  he misting accessory will continue to operate when the
T 7. 
Children should be supervised to ensure that they
• INGESTION HAZARD: This • Consult the dealer or an experienced technician for help. fan is powered off. Turn off the water source to turn off the DO NOT play with the misting accessory.
product contains a button cell This device complies with Part 15 of the FCC Rules. Operation is subject to
accessory.
or coin battery. two conditions: 8. WARNING: CHOKING HAZARD. Always keep nozzles and
• DEATH or serious injury can occur 1. This device may not cause harmful interference, and 3.  O NOT operate the misting accessory using water
D any other small parts out of the reach of children.
if ingested. 2. this device must accept any interference received, including interference pressure above typical household pressure, 60 psi. 9. 
Cleaning and user maintenance of the misting accessory
that may cause undesired operation.
• A swallowed button cell or coin Caution: Any changes or modifications to this unit not expressly approved
4. D
 O NOT use warm or hot water. Only use cold or room shall not be done by children without supervision.
battery can cause Internal Chemical by the party responsible for compliance could void the user’s authority to temperature water. 10. WARNING: Before every use, fully flush the hose out for
operate the equipment.
Burns in as little as 2 hours. 5.  O NOT handle live electrical products while in range of
D at least one minute before connecting to prevent stagnant
IC Statement:
• KEEP new and used batteries This device contains licence-exempt transmitter(s)/receiver(s) that comply the misting stream. water being misted.
OUT OF REACH of CHILDREN. with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
• Seek immediate medical attention 1. This device may not cause interference.
if a battery is suspected to be 2. This device must accept any interference, including interference that may
swallowed or inserted inside
READ AND SAVE THESE INSTRUCTIONS
cause undesired operation of the device.
any part of the body. WARNING: Contains coin battery.

READ AND SAVE THESE INSTRUCTIONS

 WHAT’S INCLUDED ASSEMBLING YOUR FAN

1 A 2 3 4 5

B
Upper pole

The upper pole

Align yellow arrow on Charging port labeled
bottom of pole with Rotate clockwise to with .
has wider end. yellow dot on base tighten the bolt.
Base
1. Align and insert the 2. Align the yellow dot 3. Turn the base on its 4. CAUTION: finger pinch 5. Charge fan to 100%
Fan Head Upper Pole into the on the assembled side, then insert the risk. Holding the fan by battery power before
(already assembled) pole with the yellow Bolt in the bottom of the handle, insert the use without the cord.
Lower Pole until it
clicks into place. arrow on the Base, the Base. Use the Allen the legs of the fan head First use: before using
then slide the pole wrench to rotate the into the top of the remote control, press
down onto the base. bolt on the bottom of assembled pole until Power Button on fan.
Make sure the pole is the base. Rotate the they click into place. Fan is operable while
installed completely bolt counterclockwise to charging.
and securely. loosen it, then remove it.
Pole
FEATURES

CORDLESS OUTDOORS OSCILLATION BREEZEBOOST™

REMOTE STORAGE
AND TILT MODE
This is a 2-in-1 fan that This fan can be enjoyed Direct the airflow by Activate the extra- You can store the remote
can be used with or indoors or outdoors. choosing between 3 powerful BreezeBoost on the convenient magnetic
without the cord. DO NOT CHARGE OR electronic oscillation mode for maximum- mount on back of the
USE IN THE RAIN. angles and manually strength air flow. fan head.
adjusting the vertical
tilt up to 55° degrees.
Allen Wrench
HOW TO USE YOUR FAN

1-5 Press on the fan head or < > arrows on the remote to switch
between fan speeds 1-5. LED lights will indicate selected fan speed.

Remote Bolt Charger Fan Speeds

(reference image only) BreezeBoost For maximum-strength airflow, press and hold on the fan head for
Mode 3 seconds, or press on the remote. During cordless use, fan speed
will automatically decrease after 20 minutes to save battery power.
ACCESSORIES

Different fan models come with different accessories. To purchase an accessory that was not included, go to sharkclean.com

Oscillation​
1 - 45° angle 2 - 90° angle 3 - 180° angle

If the fan is unplugged and

Press on the fan head or < > arrows on the remote to toggle between oscillation not used for 24 hours, the
angles. LED lights will indicate which angle is selected. remote will enter IDLE mode
to preserve battery. To turn
off IDLE mode, use the
Horizontal Press the < > arrows on the remote to change the horizontal angle of the fan buttons on the fan head.
Angle Adjust in 18° increments.

MAXIMUM CORDLESS RUNTIME: 24 hours on fan speed 1. FOR MORE INFORMATION

AVERAGE CORDLESS RUNTIME: 6 hours on fan speed 3. visit qr.sharkclean.com/fa220series or
Runtime
MAXIMUM CORDLESS PERFORMANCE: 2 hours on fan speed 5. SCAN HERE
USING YOUR
PLUGGED IN: Indefinite runtime; fan will charge while operating. SMARTPHONE CAMERA

Charge Time FROM 0% TO FULLY CHARGED BATTERY: 5-6 hours

Mister Car Charger Cover
70%-100%: green light. 6%-29%: red light steady.
Battery Indicator​
30%-69%: amber light. 5% and below: red light blinking. FOR FULL INSTRUCTIONS OR
TO PURCHASE ACCESSORIES.
 CHARGING THE FAN TABLETOP MODE

To convert the
fan to portable,
tabletop mode:

To detach the fan from the pole, press the Spread out the four support legs until they
PEDESTAL MODE: To charge the fan in TABLETOP MODE: To charge the fan in tabletop mode, insert the CHARGER Lift-Away button, then slide the fan head click into place. Place the fan on a flat, level
pedestal mode, insert the CHARGER PLUG PLUG into the charging port under the center shaft of the fan, between the 4 off the pole. surface and begin use.
into the charging port near the bottom of support legs. DO NOT CHARGE OR USE IN THE RAIN.
the POLE.
DISASSEMBLY
Different fan models have different speed selections. See the charts below for runtime for the 5-speed model and the
3-speed model.

VERTICAL ADJUSTMENT
To adjust the vertical height of your fan head, use the handle
to tilt the head up or down. The Shark Fan has a vertical
range of 55 degrees.

1. Release the fan head 2. Turn the pedestal base 3. Carefully lift the pole to 4. Press the small button
by pressing the lift away on its side to access remove it from the base. on the lower pole to
button and carefully the bolt on the bottom. detach the poles from
remove the fan from Use the included Allen one another. Carefully
the pole. wrench to rotate the bolt fold as needed for
counterclockwise, then storage. DO NOT strain
remove the bolt. the cord.
Fan Head tilted up Fan Head titled down
If grill screw, bolt, or Allen wrench have been lost, see Hardware Specs section for information on how to replace
BATTERY LIFE - 5 FAN SPEEDS any hardware.

Settings Runtime Settings Runtime STORAGE

Fan Speed 1 24.0 hours Fan Speed 4 3.0 hours
Fan Speed 1 Fan Speed 4
12.0 hours 2.5 hours
+ Oscillation + Oscillation STORAGE TYPE INSTRUCTIONS
Fan Speed 2 14.0 hours Fan Speed 5 2.0 hours
Fan Speed 2 Fan Speed 5 1. C arefully disassemble the fan OR place the assembled fan in the desired
8.0 hours 1.7 hours
+ Oscillation + Oscillation storage location. Ensure it is out of reach of children and pets.
Fan Speed 3 6.0 hours 20 minutes at a time, Short-term storage indoors (<24 hours) 2. Place the assembled fan in the desired storage location. Ensure it is
BreezeBoost™ Mode
up to 3 cycles out of the reach of children and pets. If there is inclement weather, it is
Fan Speed 3
+ Oscillation
4.5 hours BreezeBoost Mode 20 minutes at a time, recommended to bring fan indoors.
+ Oscillation up to 3 cycles
Runtime subject to 12% variability. 1. C arefully disassemble the fan OR place the assembled fan in the desired
storage location. Ensure it is out of reach of children and pets.
BATTERY LIFE - 3 FAN SPEEDS Long-term storage indoors (>24 hours)
2. Store the fan indoors when not in use for long periods of time. Ensure it is
stored out of reach of children.
Settings Runtime Settings Runtime
Fan Speed 1 24.0 hours Fan Speed 3 2.0 hours

Fan Speed 1 Fan Speed 3

10.0 hours 1.7 hours
+ Oscillation + Oscillation
20 minutes at a time,
Fan Speed 2 6.3 hours BreezeBoost™ Mode
up to 3 cycles
Fan Speed 2 BreezeBoost™ Mode 20 minutes at a time,
4.5 hours
+ Oscillation + Oscillation up to 3 cycles
Runtime subject to 10% variability.
 SETTINGS FAN SPEEDS

• Before first use, pull out the plastic tab from the battery compartment of the remote control. Changing the FAN SPEED will increase or decrease the airflow of the fan. There are 5 fan speed settings.
• T
 o preserve battery life, the fan will enter IDLE mode if left unplugged and powered off for 24 hours. In IDLE mode, the To change the speed, press the fan icon on the fan head to cycle though the different speeds. With the remote, press the up
remote cannot be used to turn on the fan. To turn off IDLE mode and turn on the power, press the power button on top or down arrows to change speeds.
of the fan head.
• T
 he LED lights on the fan head display will only remain illuminated for 20 seconds after a setting adjustment is made,
before turning off to save battery.
SPEED DISPLAY (5-SPEED MODELS) BEST FOR
• For information on how to activate or deactivate LOCK MODE for fan maintenance, please see the Maintenance section.
• Remote may be less effective when used outdoors. 1 Quiet operation

POWER ON/OFF 2 Moderate cooling

To turn the fan on or off, press the POWER button on the remote or the POWER button on the fan head.
3 Balance of noise level
and fan power
5-SPEED MODELS DISPLAY
4 Air circulation

ON 5 High power cooling

LED animations will play once
(LEDs will turn on from left to right, then turn off from right to left)

SPEED DISPLAY (3-SPEED MODELS) BEST FOR

OFF
1 Quiet operation
LEDs will turn off

2 Balance of noise level

and fan power
3-SPEED MODELS DISPLAY
3 High power cooling

ON
BREEZEBOOST™ MODE
LED animations will play once
(LEDs will turn on from left to right, then turn off from right to left) Hold for 3 seconds Turn on BreezeBoost for maximum-power airflow. When operating cordlessly, BreezeBoost will
automatically turn off after 20 minutes to save battery. BreezeBoost will run indefinitely when
the fan is plugged in.
To activate BreezeBoost, press the UP ARROW button on the REMOTE or press and hold the
OFF fan icon on the fan head for 3 seconds. Repeat to manually deactivate BreezeBoost.
LEDs will turn off
DISPLAY (5-SPEED MODELS) SPEED BEST FOR

Maximizing
BreezeBoost
fan power
LED animation will repeat 5 times
(LEDs will turn on from left to right)

DISPLAY (3-SPEED MODELS) SPEED BEST FOR

Maximizing
BreezeBoost
fan power
LED animation will repeat 5 times
(LEDs will turn on from left to right)
 OSCILLATION CLEANING THE FAN

Choose between oscillation settings to best suit your needs. 5-speed models have 3 options
for angle of oscillation, while 3-speed models have one option. When using the remote control, make sure it is pointed
To change the oscillation settings, press the up/down arrow on the REMOTE. To do so on the directly at the LEDs on the front of the fan.
fan head, press the oscillation icon to cycle through the settings. The fan may have entered IDLE mode. To preserve battery
life, the fan will enter IDLE mode if left unplugged and
To turn off oscillation, press the down arrow on the remote or the oscillation icon on the fan
powered off for 24 hours. In IDLE mode, the remote cannot
head until no LEDs are illuminated.
be used to turn on the fan. To turn off IDLE mode and turn
Why is the remote not working? on the power, press the power button on top of the fan head.
DISPLAY (5-SPEED MODELS) ANGLE BEST FOR If your remote has lost its connection to the fan, you can
easily reconnect it. Press and hold the power button on the
fan head for 5 seconds, then press the fan speed up button
Circulating air in small area,
45° on the remote while the LEDs on the fan head are flashing.
1-2 people If the remote still doesn’t work, then try replacing the
batteries in the remote.
Circulating air in moderate
90°
area, 3-4 people
Make sure the fan has battery power by pressing the Power
button. If the Battery LED indicator blinks red, then the fan
Circulating air in large area,
180° needs to be charged. When the fan is charging, the Battery
5+ people LED will blink green. See the Battery Life and How To Use
Your Fan sections for more detailed information on runtimes

GENERAL USE
Why are the remote and UI and battery indicators.
DISPLAY (3-SPEED MODELS) ANGLE BEST FOR buttons not working? If all the LEDs are flashing, the fan may be in Lock mode,
which deactivates the fan to allow you to safely maintain it.
To turn off Lock mode, press the Oscillation ( ) icon on
Circulating air in large area,
180° the fan and hold it down for 8 seconds. When Lock mode is
5+ people successfully deactivated, the LEDs will display the Power On
pattern. See the Maintenance section for more information.

HORIZONTAL ANGLE ADJUST

Why is the battery light flashing
If the battery level is low, BreezeBoost mode cannot be
You can use the remote control to change the horizontal angle of the fan from a distance. red when I am trying to turn on
activated. Charge the fan battery to use BreezeBoost.
Press the left or right arrows on the remote to adjust the horizontal angle of the fan BreezeBoost™ mode?
in 18° increments.
This fan is rain-resistant and will not be damaged by
Note: The LEDs on the fan head will not illuminate when you use this feature. light rain. However, it is not suitable to withstand heavy
Can I leave the fan outdoors?
rain or water submersion. Do not charge or use your fan
in the rain.

Ensure that the fan blade cap is fully installed before

Why is the fan rattling? operating the fan. Please see the Maintenance section
for more details.

The second LED indicator and This error state indicates an issue with the voltage of the
the Battery LED (in amber) charger. Please be sure to only use the provided Shark
are flashing. What is wrong? charging cable and power supply.

MAINTENANCE
The fan must be in Lock mode when any maintenance is
Why do I have to activate Lock
performed. Lock mode prevents the fan from accidentally
mode before maintenance?
powering on.

We recommend cleaning the fan every 6 months or as

How often should I clean the fan?
needed. See Maintenance section for more information.

Clean the misting accessory every 12 months or as needed.

ACCESSORIES

How often should I clean the Please note: the hardness of your water source will impact
misting accessory? the frequency at which the misting accessory will need to be
maintained. See Maintenance section for more information.

Why is the misting accessory

To work properly, the misting accessory must be maintained
not working effectively or not
regularly. See Maintenance section for more information.
producing mist?
 MAINTENANCE HARDWARE SPECS

We recommend cleaning the fan every 6 months or as needed. To avoid accidental damage to the fan components and
decreased performance, DO NOT use any fragrance or scented products during maintenance. Grill Screw
If grill screw, bolt, or Allen wrench have been lost, see the Hardware Specs section for information on how to replace For securing the grill to the fan
any hardware.
Drive Type Phillips
• L
 OCK MODE must be activated prior to performing maintenance. This will temporarily block all fan functions until Thread Size / Pitch M3 x 0.5mm
deactivated. Lock mode prevents the fan from accidentally powering on.
Length 16mm
1 Hold for 8 seconds 2 3 4

Screwdriver
For driving the screw
Drive Type Phillips
Lights will blink three Size No. 1
times when Lock mode
has been activated

1. T
 urn on Lock mode 2. Place the fan upright on 3. R
 otate the FAN GRILL 4. R
 emove the fan blade
before performing a flat, level surface in counterclockwise to cap. Hold the fan blades Bolt
maintenance for safety. tabletop mode. Use the remove it from the fan in place while rotating For securing base to pole
To activate, hold down Phillips-head end of your head. Set grill aside the fan blade cap
the OSCILLATION icon Allen wrench to loosen clockwise to remove it Drive Type Hex
on the fan head for the screw at the bottom from the shaft. Thread Size / Pitch M6 x 1mm
8 seconds until the LEDs of the FAN GRILL. Set
flash three times. screw aside. Length 85mm

5 6 7

Allen Wrench
For driving the bolt
Drive Type Hex
Size 5mm

5. G
 ently pull to remove 6. C
 arefully replace 7. Reinstall the fan blade
the FAN BLADES. With the BLADES onto cap. Hold the fan blades
a slightly damp cloth, the center shaft. in place while rotating
wipe down the interior the fan blade cap
parts of the fan. counterclockwise to
reinstall it to the shaft.

8 9 10 Hold for 8 seconds

Lights will display the

Power On pattern
when Lock mode has
been deactivated

8. R
 otate the FAN GRILL 9. Place the fan upright on 10. Turn off Lock mode by
clockwise to secure it a flat, level surface. Use pressing the Oscillation
to the fan head. the Phillips-head end icon for 8 seconds until
of your Allen wrench to the LEDs display the
replace and tighten the Power On pattern.
screw at the bottom of
the FAN GRILL.
 AVAILABLE ACCESSORIES MISTING ACCESSORY

OFF

ASSEMBLY:
1. Carefully align the misting accessory with the circle in the center of the fan grill, and push it in to install. Do not use
excessive force.
2. Screw the end of the misting accessory into the nozzle of a standard garden hose,
3. Turn on the hose to generate mist.
4. To adjust the amount of mist, increase or decrease the fan speed, or adjust the water pressure from the hose. Higher water
pressure or fan speed will produce more mist.
5. The valve is open when the misting accessory is taken out of the packaging. Rotate the valve clockwise to stop the flow of
water of water, as shown in the diagram.

If your misting accessory becomes less effective or stops working, follow the steps listed in below. Do NOT twist nozzles
Remote Control Misting Accessory unless they are being removed for cleaning

Use the remote control to operate your fan from a distance. Connect the misting accessory to the front grill to produce
a fine mist. For assembly instructions and more information, INSTRUCTIONS FOR MAINTENANCE: IMPORTANT SAFETY INSTRUCTIONS
see the Misting Accessory section. FOR BEST RESULTS, CLEAN THE MISTING ACCESSORY ONCE A
READ ALL INSTRUCTIONS BEFORE USE
YEAR, OR AS NEEDED. USING HARDER WATER WILL REQUIRE
MORE FREQUENT CLEANING.
1. 
The misting accessory is suitable for OUTDOOR
1.  urn off the water supply and unscrew the misting
T USE ONLY.
accessory from the water source. Remove the other 2. T
 he misting accessory will continue to operate when the
end from the fan grill fan is powered off. Turn off the water source to turn off
2. U
 nscrew the misting accessory from the water source, the accessory.
then pull the other end of the fan grill. 3. D
 O NOT operate the misting accessory using water
3. P
 lace the accessory on a flat surface and carefully pressure above typical household pressure, 60 psi.
remove each brass nozzle, one at a time. CAUTION: 4. D
 O NOT use warm or hot water. Only use cold or room
Residual pressure may remain in the misting accessory. temperature water.
4. T
 o remove a nozzle, twist it counterclockwise. Do not 5. D
 O NOT handle live electrical products while in range of
use a wrench or any other tool. WARNING: CHOKING the misting stream.
HAZARD. Keep nozzles out of the reach of children.
6. 
Keep non-waterproof electronic equipment and
5. 
To flush the misting system, once the nozzles are all appliances out of the misting stream.
removed, connect the accessory to a garden hose or
other outdoor water source. Aim the accessory away 7. 
Children should be supervised to ensure that they
from yourself or anyone else, then turn on the water DO NOT play with the misting accessory.
and run it through the system for 30 seconds to flush 8. WARNING: CHOKING HAZARD. Always keep nozzles
out any debris. and any other small parts out of the reach of children.
6. 
Soak the nozzles in a solution of undiluted distilled 9. 
Cleaning and user maintenance of the misting accessory
white vinegar (5% acetic acid by volume) to loosen shall not be done by children without supervision.
debris that may be clogging or restricting the nozzle. READ AND SAVE THESE INSTRUCTIONS
DO NOT soak the nozzles for more than 2 hours.
7. 
After soaking the nozzles in the solution, rinse them
thoroughly with water.
8. 
Carefully reinstall each nozzle by twisting clockwise
until you feel resistance.

Car Charger Fan Cover

Charge your fan on the go with the car charger accessory. Protect your fan from damage and dust. For more
For more information, see the Car Charger section. information, see the Fan Cover section.
 CAR CHARGER

INSTRUCTIONS FOR USE: IMPORTANT SAFETY INSTRUCTIONS TWO (2) YEAR LIMITED WARRANTY
READ ALL INSTRUCTIONS BEFORE USE The Two (2) Year Limited Warranty applies to purchases made from 4. Consequential and incidental damages.
authorized retailers of SharkNinja Operating LLC. Warranty coverage 5. Defects caused by repair persons not authorized by SharkNinja. These
1. 
Firmly insert the car charger plug into a 12-volt outlet 1. SAVE THESE INSTRUCTIONS. This manual contains important safety applies to the original owner and to the original product only and is defects include damages caused in the process of shipping, altering, or
and operating instructions for battery charger model FA20XCAR not transferable.
in your vehicle. from Dongguan City Gangqi Electronics Co., Ltd.
repairing the SharkNinja product (or any of its parts) when the repair is
SharkNinja warrants that the unit shall be free from defects in material and performed by a repair person not authorized by SharkNinja.
2. Insert the charger connector into the charging 2.  efore using this battery charger, read all instructions and cautionary
B workmanship for a period of two (2) years from the date of purchase when 6. Products purchased, used, or operated outside North America.
markings on the battery charger, battery, and product using battery. it is used under normal household conditions and maintained according to
port on the underside of the fan head, between the requirements outlined in the Owner’s Guide, subject to the following How to get service
3.  AUTION: To reduce risk of injury, charge only the provided
C If your appliance fails to operate properly while in use under normal
conditions and exclusions:
the 4 support legs. rechargeable battery. household conditions within the warranty period, visit sharkclean.com/
Other types of batteries may burst, causing injury to persons and damage. CA RESIDENTS ONLY: support for product care and maintenance self-help. Our Customer
The Two (2) Year Limited Warranty period begins on the original date of Service Specialists are also available at 1-855-523-4061 to assist with product
4. Do not expose charger to rain, moisture, or snow. delivery or pick-up. support and warranty service options, including the possibility of upgrading
1. 2. 5.  se of an attachment not recommended or sold by the battery
U What is covered by this warranty? to our VIP warranty service options for select product categories. So we may
charger manufacturer may result in a risk of fire, electric shock, or 1. The original unit and/or non-wearable parts deemed defective, in better assist you, please register your product online at registeryourshark.
injury to persons. SharkNinja’s sole discretion, will be repaired or replaced up to two (2) com and have the product on hand when you call.
6. 
To reduce risk of damage to cigarette lighter connector and cord, years from the original purchase date. SharkNinja will cover the cost for the customer to send in the unit to us for
pull by cigarette lighter connector rather than cord when 2. In the event a replacement unit is issued, the warranty coverage ends repair or replacement. A fee of $25.95 (subject to change) will be charged
disconnecting charger. six (6) months following the receipt date of the replacement unit or when SharkNinja ships the repaired or replacement unit.
the remainder of the existing warranty, whichever is later. SharkNinja How to initiate a warranty claim
7. 
To reduce risk of electric shock, unplug charger before attempting any
reserves the right to replace the unit with one of equal or greater value. You must call 1-855-523-4061 to initiate a warranty claim. You will need the
maintenance or cleaning. Turning off controls will not reduce this risk.
What is not covered by this warranty? receipt as proof of purchase. We also ask that you register your product
8. Do not operate charger with damaged cord or cigarette lighter 1. Normal wear and tear of wearable parts (such as batteries, etc.), which online at registeryourshark.com and have the product on hand when you
connector. Replace it immediately. require regular maintenance and/or replacement to ensure the proper call, so we may better assist you. A Customer Service Specialist will provide
9. 
The car charger may be wiped clean with water once removed from functioning of your unit, are not covered by this warranty. Replacement you with return and packing instruction information.
the power socket. Allow car charger to fully dry prior to use. parts are available for purchase at sharkaccessories.com. How state law applies
10. 
The car charger contains a 5-amp replaceable fuse. Only replace the 2. Any unit that has been tampered with or used for commercial purposes. This warranty gives you specific legal rights, and you also may have other
fuse with a 5-amp fuse, no higher. To do so, unscrew the chrome knob 3. Damage caused by misuse, abuse, negligent handling, failure to perform rights that vary from state to state. Some states do not permit the exclusion
at the top end of the car charging port to access the fuse. required maintenance (e.g., not replacing the filters), or damage due to or limitation of incidental or consequential damages, so the above may not
mishandling in transit. apply to you.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INFORMATION
REGISTER YOUR PURCHASE BATTERY REMOVAL AND DISPOSAL
FAN COVER This product contains an integral lithium battery (non-replaceable), and the
remote control uses a lithium coin battery (replaceable). DO NOT incinerate or
registeryourshark.com
compost the product with its integral battery or the remote battery. When the
fan battery can no longer hold a charge, dispose of it or recycle it (with integral
IMPORTANT SAFETY INSTRUCTIONS
Scan QR code using
1. 2. battery) in accordance with local ordinances or regulations. Remove, replace,
mobile device and dispose of or recycle the spent remote battery likewise. In some areas, it is
READ ALL INSTRUCTIONS BEFORE USE illegal to place spent lithium batteries in the trash or in a municipal solid waste
stream. Return spent battery to an authorized recycling center or to retailer for
1. 
The fan cover is not a toy. Children should not play with it recycling. Contact your local recycling center for information on where to drop
as it may become unsanitary during off the spent battery.
outdoor use. RECORD THIS INFORMATION
Model Number: �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
Serial Number: ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� FCC WARNINGS
Note: This unit has been tested and found to comply with FCC limits for Class
Date of Purchase: ����������������������������������������������������������������������������������������������������������������������������������������������������������������������� B digital devices. These limits are designed to provide reasonable protection
(Keep receipt) against harmful interference in a residential installation. This unit generates,
uses, and can radiate radio frequency energy, and if not installed and used in
Store of Purchase: ��������������������������������������������������������������������������������������������������������������������������������������������������������������������� accordance with the instructions, may cause harmful interference to
radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the
TECHNICAL SPECIFICATIONS following two conditions: (1) this device may not cause harmful interference,

INSTRUCTIONS FOR USE: Voltage:

Watts:
120V 60Hz / 3A
36W
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
To see if this unit interferes with radio or television reception, try turning it
1. P
 osition the cover over fan head, then slide it on until the fan 4000 mAh off and on.
is completely covered. To correct any interference:
■ Reorient or relocate the receiving antenna.
2. C
 inch the drawstring on the bottom of the cover to secure it Benefits of registering your product and creating an account: ■ Increase the distance between the unit and the receiver.
in place.
• Get easier, faster product support and access to ■ Connect the unit to a different outlet than the receiver.
warranty information ■ Consult the dealer or an experienced technician for help.
Caution: Any changes or modifications to this unit not expressly approved
• Access troubleshooting and product care instructions by the party responsible for compliance could void the user’s authority to
• Be among the first to know about exclusive product promotions operate it.
IC statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
TIP: You can find the model and serial numbers on the QR code label with Innovation, Science and Economic Development Canada’s licence-exempt
on the underside of the fan head. RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark® fan.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean.com
Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein
are subject to change without notice.
This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information.

© 2025 SharkNinja Operating LLC. BREEZEBOOST, FLEXBREEZE, and SHARK are trademarks of SharkNinja Operating LLC.

FA222_IB_IR_Coincell_Remote_REV_Mv2
@sharkhome