380W BEAM MOVING HEAD
USER MANUAL
1
Please read and keep this manual carefully for further use!
Thank you for buying our professional Beam moving head.
This user manual includes important information for installation and operation, so please read this
user manual carefully before installation and operation, and keep this user manual well for further
use.
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the
installation and operation should be done by the verified technician and follow the instruction strictly.
Spare part includes:
Name QTY Unit
Fixture 1 PC
User manual 1 PC
Power cable 1 PC
DMX signal cable 1 PC
Safety rope 1 PC
Please check carefully
that there is no damage caused by transportation. Should there be any, consult your local dealer.
Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual
strictly for operation, if this fixture is damaged by improper operation and mistake, the
fixture will be out of warranty, and manufacture or dealer won’t be responsible for it. In case
of any technology change in this manual,we won’t advise in further .
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Warning!
Silkscreen symbol on
Damages lightby the disregard of this user manual are not subject to
caused
warranty. The dealer will not accept liability for any resulting defects or
problems.
Installation
2
► This fixture is not suitable for direct installation on combustible material surface, please keep the
fixture surface at least 0.5m from any combustible material.
► If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
►The applicable temperature for the fixture is between -25°C to 45°C. Do not use the lighting under
or above this temperature range.
►The truss for hanging the fixture should be able to hold 10 times weight of this fixture and no
deformation after 1 hour hang.
►Please don’t stand under the fixture when install, uninstall, move or repair the fixture.
►Please ensure the light is connected correctly and invite professional technician to check and
confirm the electrical data before installation.
►Please invite professional technician to check the fixture and installation each year.
Rigging：
Insert the quick-lock fasteners of the first holder into the respective holes on the bottom of the
device.Tighten the quick-lock fasteners fully clockwise.
Fix the clamp on truss or other fixture bracket.
Pull the safety rope through the holes on the bottom of the base and fasten it on the truss or other
3
fixing point.
Note:This step is quite important to ensure that fixture will not drop down for the clamp damage.
Product specification
Voltage：100-240V，50/60HZ；
Power Consumption：500W；
Lamp: Chinese lamp 380W
Fuse:8A/250V，￠5*20
DMX Channel: 19CH
Operation mode: master-slave/DMX/Auto
Focus: Yes
Fixed gobo: 12 gobos+open+ 5 glass gobos
Strobe: 25Hz
Color: 14 colors+open
Prism 1: 8-facet
Prism 2: 8+16-facet
Pan: 540°
Tilt: 270°
Frost / Six-color effect: Yes
RDM: Yes
Display and operation
4
DMX DMX signal indicator
AUDIO Sound control indicator
Up menu up selection
Down menu down selection
Left Menu left to select/return
Right Menu right to select
ENTER Confirm button
time on the left Total system usage time
time on the right Total time of this power-on
Vertical signal at the Current DMX signal strength
top Red: No signal / White: Current signal strength
Green: OK, no errors
Square icon in the
Red: There is an error (click the icon or "Information Menu/Error
upper right corner
Information/View" to view the error
System Menu description:
反向 Reve Invert the screen display
退出 Exit Exit to the main interface
Lang 语言 Choose from Chinese or English
标准设置 Standard Address code and some common function settings
高级设置 Advanced Main parameter factory settings
系统信息 Info Error, software version, etc. information display
手动编程 Program Manually control the operation, or edit the user program
Automatic operation or Sound-controlled operation of
测试运行 Perform
built-in programs, user programs
系统复位 Reset System reset to initial position
5
Display Setting:
6
Default set Enter Default set
Address 001-512 Set address code
Mode1
Mode2
DMX mode Select DMX control mode
Mode3
Mode4
effect wheel automatically finds the shortest
Effect mode No/Yes
distance to rotate and run
Started lamp Off/on Choose to turn the bulb "on" or "off" each time
Switch lamp Off/on Turn on the lamp manually
Clear Keep DMX value or clear DMX channel value
No signal
Hold when no DMX signal
Standard Green
Blue
UI Color Choose screen menu color
Golden
Gray
Show time No/Yes Display the runtime timer on the main screen
Brightness 000-255 Adjust screen brightness
Turn off the screen when no touch and key
Screensaver Off/on
operation
XY encoder No/Yes Cancel or use the XY auto-correction function
X inversion No/Yes Select X-axis to run forward or reverse
Y inversion No/Yes Select Y-axis to run forward or reverse
Focus inversion No/Yes Choose to run the focus forward or reverse
Zoom inversion No/Yes Choose to run the Zoom forward or reverse
Advanced This is the main parameter setting of the fixture and requires permission
If there are no errors or there are errors, click
Error List No error/View
OK to view the errors
System ver Vxxxxxxx System version information
Serial NO. xxxxxxxx Equipment factory number
SYS timer 00000.0H Total system running time (hours)
Run timer 000:00 Running time after this power-on (hours)
Lamp timer 00000.0H The total time of lamp on (hours)
The temperature of the main part (requires
Info Equip TEMP 000
device support)
The temperature of the head (requires device
Head TEMP 000
support)
FAN 1 Speed 0000 RPM fan 1 speed (requires equipment support)
FAN 2 Speed 0000 RPM fan 2 speed (requires equipment support)
Run mode Auto/Sound Run selected programs Auto or Sound
Run speed 255 Set the speed of Auto running
Run cross 255 Set run cross for Auto or Sound
Built-in 1 Off/on built-in test program 1
Built-in 2 Off/on built-in test program 2
User PRO 1 Off/on User-programmed program 1
User PRO 2 Off/on User-programmed program 2
User PRO 3 Off/on User-programmed program 3
Perform User PRO 4 Off/on User-programmed program 4
Circle shape Off/on (reserve)
Square shape Off/on (reserve)
Shape range 000 (reserve)
Sound DB 000 Adjust the sound control sensitivity
This function can program up to 4 user programs, and the 4 programs can be run in
series, that is to say, the programmed
7
4 programs can be switched to ON at the same
Program time in the "User-Pro" function. Go to program 2, go to program 3, then program 4,
then loop back to program 1, and so on. Of course, it can also be run as a single
option.
19 DMX channel
16CH Function Value Details
1 Color whee 000-004 White
005 -009 White+Color 1
010 - 014 Color 1
015 - 019 Color 1+color 2
020 - 024 Color 2
025 - 029 Color 2+color 3
030 - 034 Color 3
035 - 039 Color 3+color 4
040 - 044 Color 4
045 - 049 Color 4+color 5
050 - 054 Color 5
055 - 059 Color 5+color 6
060 - 064 Color 6
065 - 069 Color 6+color 7
070 - 074 Color 7
075 - 079 Color 7+color 8
080 - 084 Color 8
085 - 089 Color 8+color 9
090 - 094 Color 9
095 - 099 Color 9+color 10
100 -104 Color 10
105 -109 Color 10+color 11
110 -114 Color 11
115 -119 Color 11+color 12
120 -124 Color 12
125-129 Color 12+color 13
130 -134 Color 13
140- 144 Color 14
145- 149 Color 14+White
150- 200 Reverse flow (from fast to slow)
201- 255 Forward flow (from slow to fast)
2 Strobe 000-003 Shutter closed
004-103 Strobe from slow to fast
104-107 Open the shutter
108-207 Pulse strobe from slow to fast
208-212 Open
213-251 Random strobe from slow to fast
252-255 Open → (controlled by the dimming channel)
3 Dimmer & 000-255 dimmer from dark to bright
RGB
4 Gobo wheel 000 - 004 White
005 - 009 gobo 1
010 - 014 gobo 2
8
015 - 019 gobo 3
020 - 024 gobo 4
025 - 029 gobo 5
030 - 034 gobo 6
035 - 039 gobo 7
040 - 044 gobo 8
045 - 049 gobo 9
050 - 054 gobo 10
055 - 059 gobo 11
060 - 064 gobo 12
065 - 069 gobo 13
070 - 074 gobo 14
075 - 079 gobo 15
080 - 084 gobo 16
085 - 089 gobo 17
090 - 129 Forward flow (from slow to fast)
130 - 134 Stop
135 - 169 Reverse flow (from fast to slow)
170 - 174 gobo 1 shake slow to fast
175 - 179 gobo 2 shake slow to fast
180 - 184 gobo 3 shake slow to fast
185 - 189 gobo 4 shake slow to fast
190 - 194 gobo 5 shake slow to fast
195 - 199 gobo 6 shake slow to fast
200 - 204 gobo 7 shake slow to fast
205 - 209 gobo 8 shake slow to fast
210 - 214 gobo 9 shake slow to fast
215 - 219 gobo 10 shake slow to fast
220 - 224 gobo 11 shake slow to fast
225 - 229 gobo 12 shake slow to fast
230 - 234 gobo 13 shake slow to fast
235 - 239 gobo 14 shake slow to fast
240 - 244 gobo 15 shake slow to fast
245 - 249 gobo 16 shake slow to fast
250 - 255 gobo 17 shake slow to fast
5 Prism1 000-31 no prism
32-255 prism 1
6 Prism1 000-127 Prism angle adjustment
rotation 128-190 Reverse rotation (fast to slow)
191-192 Stop
193-255 Forward rotation (slow to fast)
7 000-31 no prism
Prism 2
32-255 prism 2
8 000-127 prism angle adjustment
Prism2 128-190 Reverse rotation (fast to slow)
rotation 191-192 Stop
193-255 Forward rotation (slow to fast)
9
9 Focus 000-255 Pattern clarity from near to far
10 pan 000-255 0-540 degree
11 pan fine 000-255 0-1.2 degree
12 tilt 000-255 0-270 degree
13 tilt fine 000-255 0-1.2 degree
14 XY speed 000-255 speed fast to slow
15 000-127 no function
Frost & 6-
128-191 6-color effect
color effect
192-255 Frost
16 000-025 no function
Lamp 100-105 Lamp off
control 200-205 Lamp on
250-255 all motors reset
17 RGB strobe 000-255 Strobe from slow to fast
18 RGB effect 000-001 Red 1
002-005 Green 2
006-010 Blue 3
011-015 Yellow 4
016-020 Rose 5
021-025 Light blue 6
026-029 White 7
030-048 Color jump 8
049-054 Effect 9
055-058 Effect 10
059-063 Effect 11
064-068 Effect 12
069-073 Effect 13
074-078 Effect 14
079-087 Effect 15
088-092 Effect 16
093-097 Effect 17
098-102 Effect 18
103-107 Effect 19
108-112 Effect 20
113-116 Effect 21
117-122 Effect 22
123-126 Effect 23
127-131 Effect 24
132-136 Effect 25
137-140 Effect 26
141-144 Effect 27
145-149 Effect 28
150-155 Effect 29
156-160 Effect 30
161-165 Effect 31
166-170 Effect 32
10
161-165 Effect 33
166-174 Effect 34
175-179 Effect 35
180-184 Effect 40
185-189 Effect 41
190-194 Effect 42
195-199 Effect 43
200-203 Effect 44
204-208 Effect 45
209-213 Effect 46
214-218 Effect 47
219-223 Effect 48
224-228 Effect 49
229-232 Effect 50
233-237 Effect 51
238-242 Effect 52
243-247 Effect 53
248-252 Effect 54
253-255 Effect 55
19 RGBeffect 0-255 Speed from slow to fast
Speed
Gobo Wheel
Color Wheel:
11
Frost & 6-color:
DMX-512 connection
Connect the provided XLR cable to the male 3-pin XLR output of your controller and the other side
to the female 3-pin XLR input of the light.then connect the DMX signal to the first fixture to the 2nd
fixture, after all fixtures are connected,
The signal cable should be two - core with screened cable with XLR input and output connectors.
Please refer to the diagram below
12
DMX terminator connection
If there are many lines or lights, it is recommended to use a DMX terminator to prevent DMX signal
corruption, the DMX terminator is an simple XLR plug with a 120 Ω resistor connected between pins
2 and 3,which is then plugged into the output XLR socket of the last fixture in the chain.
3-Pins connection
13
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with
alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.
CAUTION
Cut off power before cleaning and maintenance!
Attention
Do not see directly light source when open the light, and make sure power off before do any
installation or maintenance.
CAUTION
Wires connection must be done professional person!
Cautions
Before delivery, this device has passed strict inspection, Please follow the user manual strictly for
operation, if this fixture is damaged by improper operation and mistake, the fixture will be out of
warranty, and manufacture or dealer won’t be responsible for it. In case of any technology change
in this manual,we won’t advise in further .
Common issues instruction
Issues Solve instruction
No power Check power’s voltage
When power in, output light but the Check address setting and the control DMX cable
device cannot accept control connection well or not
signal
The effect have light shadow Check electronic focus DMX channel value, if it’s
14
suitable distance
Light beam dim The lamp maybe arrived end of using life, should
change new lamp, and also check light source
cleaning or not
Note: the maintenance should be done by the verified technician.
Warranty Card
This product is made of high-brightness transistor. We will provide 1 year warranty
under the condition that user has operated the light normally and lifetime service.
We won't provide warranty if the damage is caused by artificial or force majeure
event. Cost of fittings should be charged by user if product need maintenance after
1 year .Please cut this warranty card and shipped it along with the product to our
factory when applying for warranty.
Product：
Purchasing date：
Code of invoice：
Warranty date: From To
User’s name： Add：
Company： Tel：
15
