2
2/2 directional poppet valve
WSM06020W-61
1 Solenoid operated, direct-acting,
up to 25 l/min normally closed,
up to 350 bar
cartridge valve metric – 350 bar
FUNCTION PRODUCT ADVANTAGE
z High performance version for high pressures and long service life
z Coil seals protect the solenoid system
z Wide variety of connectors available
z Excellent switching performance by high-performance HYDAC solenoid
z External surfaces with advanced corrosion protection thanks to
ZnNi coating (1,000 h salt spray test)
DESCRIPTION OF FUNCTION
WSM06020W-61 is the high-performance version of the standard WSM06020W-01. With
its larger coil and modified design, it can switch at pressures of up to 350 bar and allows
a flow rate of 25 l/min. When the solenoid coil is de-energised, the valve blocks flow in
both directions. When the solenoid coil is energised, there is free flow through the valve
in both directions.
Important note:
No metering orifice is permitted just upstream from port 1.
1
EN 5.949.3.4/06.24
1
TECHNICAL CHARACTERISTICS1)
Operating pressure max. 350 bar
Flow rate max. 25 l/min
Internal leakage Leak-free, max. 5 drops/min (0.25 cm³/min) at nominal pressure, ν = 34 mm2/s
Pressure fluid Hydraulic oil to DIN 51524 Part 1, 2 and 3
Ambient temperature range min. -40 °C to max. +60 °C
Temperature range of pressurised NBR: min. -20 °C to max. +100 °C
operating fluid FKM: min. -20 °C to max. +120 °C
Viscosity range min. 10 mm²/s to max. 420 mm²/s
Filtration Permitted operating fluid contamination level according to
ISO 4406 Class 21/19/16 or higher
MTTFD 150 - 1200 years, assessment according to DIN EN ISO 13849-1:2016;
Table C.1, Confirmation of ISO 13849-2:2013; Tables C.1 and C.2
Installation position User-definable
Material Valve body: Steel, hardened
Spools: Steel, hardened and ground
Seals: NBR (standard)
FKM (optional)
Support rings: PTFE
Coil: Steel/polyamide
Cavity 06020
Weight 0.42 kg (with coil)
Electric system
Type of voltage DC: DC voltage
AC: AC with rectifier integrated in the coil
Nominal current at 20 °C 2.22 A at 12 V DC
1.13 A at 24 V DC
Voltage tolerance ±15 % of nominal voltage
Duty cycle 100 % duty cycle (continuous operation) up to max. 115 % of the nominal voltage at 60 °C ambient temperature
Response time Energised: approx. 30 ms
at pmax; Qmax, ν = 34 mm2/s De-energised: approx. 40 ms
Greatly increased reaction times possible for other operating conditions
Coil design Coil …-50-1836
1)
see "Conditions and Instructions for Valves" in brochure 53.000.
DIMENSIONS
23.8
Ø36.3
Manual override
Tightening torque
4 Nm
After loosening the
mounting nut, the coil can
be rotated through 360° and
removed
86 max.
84 max.
50.3
6kt SW24
12.5
Tightening torque*
2.5
26
2
EN 5.949.3.4/06.24
1
* Tightening torque: Ø15
Steel housing (burst strength > 360 N/mm²): 40 Nm M20x1.5
Aluminium housing (burst strength > 330 N/mm²): 35 Nm Millimetre
(With torque tool according to DIN EN ISO 6789, tool type II class A or B). Subject to technical modifications.
2
CAVITY
06020
25
0.02 M20x1.5 X 4:1
0.05 A B
1 ±0.2
PD Rz2 6.3
A
Rz1 10 ACS
0.1 B
9.8 min.*
VE
12.5 ±1
30° ±1° (Including angle)
14.6 ±0.1
X Rz 6.3
16 max.*
26.5 ±0.5 Fitting depth
60° ** ACS
0.05 A B 21.4 ±0.05
28.5 ±0.5
25.7
2 R0.2 ±0.2
R0.15 ±0.05
Rz 6.3
45°
3.2 ±0.2
Ex.: 7
1
Max. Nominal : 14 VE = Visual Examination
B
H8
15 Ra 6.3 Rz 6.3 Rz 10
0.05 A B
[ 14±1]
* Permitted boring zone (for block design) Millimetre
** Sharp edges should be avoided by using a radius of 0.1 mm to 0.2 mm Subject to technical modifications.
MODEL CODE
WSM06020W – 61M – C – N – 24 DG
Designation
2/2 directional poppet valve
Design
619 = Standard
61M9 = with manual override
Type of connection
C = Cartridge valve
Sealing material
N = NBR (standard)
V = FKM
Nominal voltage
12 = 12 V DC
24 = 24 V DC
115 = 115 V AC
230 = 230 V AC
Further versions on request.
Coil design (50-1836) Number of poles Port Protection class
DC
DG = design A acc. to DIN EN 175301-803 3-pin radial IP65
DK = Kostal threaded terminal M27x1 2-pin radial IP65 / IP67
DL = 2 free wires 0.75 mm² x 457 mm (18'') 2-pin radial IP65 / IP67
DN = Deutsch DT04-2P plug 2-pin axial IP65 / IP67
DO = M12 plug 4-pin radial IP65
DT = AMP Junior Timer 2-pin radial IP65 / IP67
DU = AMP Junior Timer 2-pin axial IP65 / IP67
AC
AG = design A acc. to DIN EN 175301-803 3-pin radial IP65
Further versions on request.
EN 5.949.3.4/06.24
3
TYPICAL PERFORMANCE CURVES
Δp/Q performance curve 1→2 measured at ν = 34 mm2/s, TOil = 46 °C
[psi] [bar]
30
400
25
350
300
20 2→1, 100 % Imax
Pressure drop Δp
250 1→2, 100 % Imax
15
200
150 10
100
5
50
0 0
0 5 10 15 20 25 30 [l/min]
0 1 2 3 4 5 6 7 [gpm]
Flow rate Q
MATERIAL OVERVIEW
Standard models
Designation Part no.
WSM06020W-61-C-N-12DG 3707060
WSM06020W-61-C-N-24DG 3531890
WSM06020W-61M-C-N-24DG 3592515
WSM06020W-61-C-V-24DG 3666937
WSM06020W-61-C-N-230AG 3531891
Further versions on request.
Spare parts, seal kits
Designation Material Code Part no.
Seal kit NBR 06020-NBR 3119017
Seal kit FKM 06020-FKM 3262477
Housing
Designation Material Code Pressure max. Connections Weight Part no.
Inline connection housing Steel, zinc-plated R06020-01X-01 350 bar G3/8" 0.42 kg 275266
Cavity tools
Designation Part no.
Countersink (shank MK3) 170033
Reamer (shank MK2) 1000768
HYDAC FLUIDTECHNIK GMBH
NOTE
Justus-von-Liebig-Str.
EN 5.949.3.4/06.24
The information in this brochure relates to the operating conditions and fields of application 66280 Sulzbach/Saar
described. For applications and operating conditions not described: please contact the Germany
relevant technical departments. Phone: +49 6897 509-01
Subject to technical modifications. Email: [email protected]
Documents are only valid if they have been obtained via the website and are up-to-date. Internet: www.hydac.com
4
