Xitanium

LED driver

Datasheet

Xitanium Outdoor LED Drivers Dimmable (1-10V) Independent

Xitanium Dim 250W 1.05A 1-10V 230V I220C

LED-based light sources are an excellent solution for outdoor environment. They are long-lasting and require low
maintenance. However, to get the best out of the LEDs, these light sources require highly reliable and efficient LED Drivers.
Philips Xitanium Dimmable (1-10V) LED Outdoor Drivers are specifically designed to deliver reliable performance and
protection while meeting the strict performance, approbation and application requirements.

Benefits Features
Reliability • Proven robustness and reliable electronic driver design.
• Robust design; capable of withstanding harsh outdoor conditions. • Achieving highest efficiencies based on advance technology.
• Long lifetime and high survival rate. • Long lifetime; 50k hrs @ Tc max.
• Superior Surge protection suitable for much more rigorous • Surge protection; 6kV line-line, 6kV line-earth
outdoor application. • Suitable for Class I isolated luminaires.
• Backed by 5 year warranty from a company you can trust. • Authorized certificate: ENEC, CB, CE and CCC.
• Consistent waterproof performance through the lifecycle.
Applications
Affordable • Road and street lighting
• Component integration in advanced IC enables cost effective • Area and flood lighting
design. • Tunnel lighting
• Proven robustness & reliability secure the lowest luminaire • High-bay lighting
maintenance over time.

Easy to use
• Extreme compact size. fitting with varied luminaires.
• Easy to design-in based on the good thermal management and
extra EMI margin

August 2021
Electrical Input Data

Specification item Value Unit Condition

Nominal Input Voltage 220…240 Vac
Input Voltage AC 198…264 Vac Performance range
Operation Voltage AC 85…305 Vac Safety operation range
Nominal Input Frequency 50…60 Hz
Input Frequency AC 47…63 Hz Maximum permissible range
Nominal Input Current 0.9…1.2 A 220V…240V at full load
Maximum Input Current 1.35 A At 198V
Nominal Input Power 265 W At 230V at full load
Power Factor ≥0.95 At 230V at full load
Total Harmonic Distortion ≤10 % At 230V at full load
Efficiency 93 % @rated output power @rated input voltage @max. Uout

Electrical Output Data

Specification item Value Unit Condition

Regulation Method Constant Current
Output Voltage 118…238 Vdc
Output Voltage Max 400 Vdc Peak voltage at open circuit
Output Current 1050 mA Performance voltage range
Output Current Tolerance ±5 % At max. output current
Output Current Ripple LF 5 % Ripple = peak / average, at<1kHz
Output PstLM ≤ 0.01 In entire operating window
Output SVM ≤ 0.07 In entire operating window
Output Power 250 W At full load
Galvanic Isolation Yes Basic; 2U+1000V

Electrical Data Control Input

Specification item Value Unit Condition

Control Method 1-10 V
Digital Interface N/A According 2.0 specifications
Mains Control N/A Can be configured via MultiOne
Time-based Integrated Control N/A Can be configured via MultiOne
Dimming Range 10-100 %

Wiring & Connections

Specification item Value Unit Condition

Input Wire Size 1.0 mm² 3-wire cable; 300V/500V rating or higher
Output Wire Size 1.0 mm² 2-wire cable; 300V/500V rating or higher
Input & Output Wire Length 200 ± 30 mm Out of enclosure and not including connector length
Control Wire Size 1.0 mm² 2-wire cable; 300V/500V rating or higher
Control Wire Length 200 ± 30 mm Out of enclosure and not including connector length

2/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
CE Isolation

BasicIsolation: 2U+1000 V Input Wires Output Wires Chassis

Input Wires N/A Basic Basic
Output Wires Basic N/A Basic
Chassis Basic Basic N/A

Operational Temperature and Humidity

Specification item Value Unit Condition

Ambient Temperature -40…+55 °C
Tcase Maximum 80 °C Measured at Tc-point
Tcase Life 70 °C Measured at Tc-point
Tcase Cut-Off 90 °C Power to LEDs is reduced

Storage Temperature and Humidity

Specification item Value Unit Condition

Ambient Temperature -40…+55 °C

Lifetime

Specification item Value Unit Condition

Lifetime 100,000 Hours At Tcase Life; Survival rate = 90%

3/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
Programmable Features

Specification item Value Remark Condition

Adjustable Output Current (AOC) N/A See Design-In Guide
LED Module Temperature Derating (MTP) N/A
Constant Lumen Output (CLO) N/A
DC Emergency Dimming (DCEmDIM) N/A
Corridor Mode N/A
Energy Metering N/A
Diagnostics N/A

Features

Specification item Value Remark Condition

Over Temperature Protection Yes Dim Down Automatic Recovery
Open Circuit Protection Yes Automatic Recovery
Short Circuit Protection Yes Automatic Recovery
Over Power Protection Yes
Hot Wiring N/A
Suitable for fixtures with Protection Class Class I
320Vac@ 48hrs
Input over-voltage Yes
350Vac@2hrs

Certificates and Standards

Specification item Value

Approval Marks CE / CCC / ENEC / CB
Ingress Protection Rating IP67

Inrush current

Specification item Value Unit Condition

Inrush Current Ipeak 38.3 A At 230Vac
Inrush Current Twidth 625 μs At 230Vac, measured at 50% Ipeak
Drivers per MCB 16A Type B 6 pcs

T ( @ 50% of Ipeak)
Ipeak

4/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
Earth Leakage Current

Specification item Value Unit Condition

Typical Leakage Current ≤0.7 mApk Meets IEC60598; LED module not included

Surge Capability

Specification item Value Unit Condition

Mains Surge Capability Differential Mode 6 KV L-N, 2Ohm
Mains Surge Capability Common Mode 6 KV L/N-GND, 12Ohm

Dimensions

Specification item Value Unit Condition

Length overall 220 mm
Width overall 93.8 mm
Height overall 48.6 mm
Mounting Holes Distance 207 mm
Mounting Holes Width 44 mm
Mounting Holes Size 4 mm For M4 with max head diameter of 10mm
Weight 1305 g

Logistical Data

Specification item Value

Product Name Xitanium Dim 250W 1.05A 1-10V 230V I220C
Logistics Code 12NC 9290 014 04180
Pieces per Box 6

5/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
Graphs

Operating window

260
Output Voltage (V)

240

220

200

180

160

140

120

100

80
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2

Output Current (A)

Efficiency versus output power

96
Efficiency (%)

230 Vac
94 202 Vac
254 Vac
92

90

88

86

84

82

80
( Tcase = 70°C ) 0 50 100 150 200 250 300

Output Power (W)

Power factor versus output power

1
Power Factor

230 Vac
202 Vac
0.95 254 Vac

0.90

0.85

0.80

0.75
( Tcase = 70°C ) 0 50 100 150 200 250 300

Output Power (W)

6/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
Total Harmonic Distortion (Tcase = 70°C)

25
THD ( % )

230 Vac
202 Vac
20
254 Vac

15

10

0
0 50 100 150 200 250 300

Output Power (W)

Lifetime vs Tcase

120
Lifetime (Khrs)

100

80

60

40

20

0
10 20 30 40 50 60 70 80

Tc

• Failure rate information based upon MTTF modeling: 90% survival at end of life @ Tcase<=80°C
• Failure rate information based upon field call rate data: <0.01% per 1K hour @ Tcase<=80°C

1-10V dimming Curve

100

90
Iout (%)

80

70

60

50

40

30

20

10

0
0 1 2 3 4 5 6 7 8 9 10 11 12 13

Vdim (V)

7/8 Xitanium Dim 250W 1.05A 1-10V 230V I220C August 2021
250W Vin vs Pout

100
Output Power (%)

90

80

70

60

50

40

30

20

10

0
90 105 120 135 150 165 180 195 210 225 240 255 270 285 305

Vin (V)

©2021 Signify Holding, IBRS 10461, 5600 VB, NL. All rights reserved.

The information provided herein is subject to change without notice. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document
is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their
respective owners.
Date of release: August 10, 2021

www.philips.com/oem