MASTERSPEC® - SPECIFICATION COORDINATION CHECKLIST 05/04
Copyright 2004 by The American Institute of Architects (AIA)
Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA
SECTION 12485 - FOOT GRILLES
Coordinate the following requirements specified in other Sections of this Project's Specifications with
this Section. Expand this list for office and consultant coordination. Copy and mark this list to distribute
to appropriate design team members for Project Manual coordination.
References on this Specification Coordination Checklist are to MASTERSPEC Section numbers and
titles existing at the time this Section was updated. Refer to the current Consolidated Table of Contents
because Section numbers and titles may have changed.
SECTION 01352 - LEED REQUIREMENTS for additional LEED requirements.
SECTION 01400 - QUALITY REQUIREMENTS for minimum qualification levels for entities
engaged by the Contractor.
SECTION 01600 - PRODUCT REQUIREMENTS for product selection procedures and options.
SECTION 03300 - CAST-IN-PLACE CONCRETE for slab depression grouting and filling for
recessed foot grilles and frames.
SECTION 05530 - GRATINGS for foot grilles fabricated from grating.
SECTION 07620 - SHEET METAL FLASHING AND TRIM for fabricated sheet metal foot-
grille drain pans.
SECTION 08710 - DOOR HARDWARE for thresholds, floor closers, and other door hardware in
the immediate vicinity of foot grilles.
SECTION 09400 - TERRAZZO for terrazzo flooring.
SECTION 12484 - FLOOR MATS AND FRAMES for flexible floor mats and frames.
SECTION 15150 - SANITARY WASTE AND VENT PIPING for waste drainage piping.
SECTION 15155 - DRAINAGE PIPING SPECIALTIES for floor drains.
*****
FOOT GRILLES 12485 - S1