Scribd
Upload
13 views1 page

Section 07821 - Board Fire Protection: in Addition

The document is a checklist for coordinating drawings with specifications for board fire protection as per MASTERSPEC guidelines. It outlines essential information that should be included in the drawings, such as the extent and locations of fire-resistance-rated construction and special anchorage requirements. Additionally, it specifies areas for calcium silicate board fire protection and finish construction details.

Uploaded by

warwarking
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views1 page

Section 07821 - Board Fire Protection: in Addition

The document is a checklist for coordinating drawings with specifications for board fire protection as per MASTERSPEC guidelines. It outlines essential information that should be included in the drawings, such as the extent and locations of fire-resistance-rated construction and special anchorage requirements. Additionally, it specifies areas for calcium silicate board fire protection and finish construction details.

Uploaded by

warwarking
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MASTERSPEC® - DRAWING COORDINATION CHECKLIST 02/07

Copyright 2007 by The American Institute of Architects (AIA)


Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

SECTION 07821 - BOARD FIRE PROTECTION


In addition to general MASTERSPEC instructions for coordinating Drawings with Specifications,
Drawings should indicate the following information related to this Section:

q Extent of each type of board fire protection. Use generic names from this Section if using more than
one type.

q Locations and extent of fire-resistance-rated construction with board fire protection. Include the
design designations listed in UL's Fire Resistance Directory or in listings of another qualified testing
and inspecting agency.

q Special anchorage requirements if available and if the choice to select from approved systems per
Specification is not left to the Contractor.

q Locations of calcium silicate board fire protection that will be exposed and is indicated to have joints
finished and surface treated to receive a decorative finish.

q Areas to be covered by finish construction specified in other Sections.

*****

BOARD FIRE PROTECTION 07821 - D1

You might also like