CAR MULTIMEDIA

Newport Beach 370

NOTE: Please do not watch videos or use other Apps while the vehicle is in motion.
Doing so, is a safety violation. To watch videos or use Apps, please ensure that the vehicle is in
parked mode with handbrake activated.
Please check compatibility of the device with your mobile phone before purchase.
New phone software versions in the future may or may not be compatible with the device.
In-Warranty replacement will not be applicable for non compatibility of the mobile phone with
the device.
Panel Introduction

Head unit features a brilliant capacitive display with a high-end tuner and PhoneLINK

1 IR remote Sensor
2 Rotary/push button Short press: Switch ON device. In operation: Mute audio source
Long press: Switch OFF device Turn: Adjust volume
3 USB slot 1
4 USB slot 2
5 AUX IN
6 RESET button. Restore to default factory settings of the device. Caution! All personal
settings will be lost

7 Touch screen user interface

 Remote Control

1 POW: Switching device on/off.

2 MODE: Select source.
1 4 3 AMS: Preset scan/Auto store.
4 MUTE: Mute on/off.
5 8 5 BAND: Select radio band
6/7/9/11/14/15: VOL+/-: Volume up/down.
9 8 AF: AF on/off.
12 10 ENTER/SETUP：Con rm/setup
12 PTY: PTY selection.
13 16 13 EQ: Select EQ.
16 TA : TA on/off.
17 20 17 SEL: Select EQ/LOUD/BEEP.
18 ■: Stop the player.
21 24 19/20: +/- 10 songs skip.
21 ►II : Play/Pause.
25 28 22 INT: Introduction.
23 RPT: Repeat.
29 32 24 RDM: Random.
25 PREV/I◄◄: Seek down/previous track.
33 26 NEXT/►►I: Seek up/Next track.
36
27 REV/◄◄: Fast reverse.
28 FWD/►►: Fast forward.
37 40 29 - 38: numbers 0-9.
39 SCAN: scan up.
40 OSD: Display off.

1. Aim the remote control at the remote sensor on the

unit.
2. Replace the battery from the remote control or
insert a battery insulator if the battery has not been
used for a month or longer.
3. DO NOT store the remote control in direct sunlight
or in a high temperature environment, as it may not
function properly.
4. The battery can last up to for 6 months in normal
conditions. If the remote control does not work,
please change the battery.
5. Use "button shaped" lithium battery "CR2025" (3V)
only.
6. DO NOT recharge, disassemble, heat or expose the
battery to re.
7. Insert the battery in the proper direction according
to the ( + ) and ( - ) poles.

Replacing the lithium battery

When the range of operation of the card remote
control becomes short or no function, replace the
lithium battery with a new one. Make sure the battery
polarity replacement is correct.
1. Pull out the battery holder while pressing the
stopper.
2. Insert the button-type lithium battery with the (+)
mark facing upward. Insert the battery holder into
the remote control.
Contents

Service 13
Contents Connection diagram 15
Safety Notes 04 Device Parameters 15
Symbols Used 04 Supported Audio & Video formats 16
General Warning 04
Road Safety 04
Instructions to read this User Manual 05
Cleaning notes 05
Disposal notes 05
Installation 05
Scope of delivery 05
Operation 06
Switch ON / OFF via vehicle ignition 06
Volume 06
Main menu 06
Display ON / OFF 06
Wallpaper 06
Digital Clock 06
Radio 06
Select FM / AM band 06
Tuning into a station 06
Stereo/Mono switching 07
RDS function 07
Switching AF(Alternate frequencies) function 07
Switching the TA (Travel Announcement) function 07
Update the clock via RDS 07
USB 08
Basic information 08
Connecting a USB data carrier 08
Removing the USB data carrier 08
Audio playback from USB 08
Video playback from USB 08
Image playback from USB 09
Bluetooth mode 09
Bluetooth pairing 09
Connection status 09
Bluetooth PHONE mode 09
Phone book 10
Phone Log 10
Bluetooth playback mode 10
External audio / video sources 11
AV-IN 11
Rear Camera Input 11
External monitor 11
Sound settings 11
Equalizer 11
Audio distribution (fader/balance) 11
General settings 12
Steering Wheel Control 12
Software version： 12
Others 12
PhoneLINK 13
Useful information 13
Warranty 13
 Safety notes

Safety notes with the electrical system of the vehicle. For this
purpose, observe the connection diagram at the
The car audio system is manufactured according to
end of these instructions. For self-installation make
recommended and established safety guidelines in a
sure you have the right tools with you.
state of the art facility. Even so, dangers may occur if
you do not observe the safety notes in the instruction Ÿ Use your device in such a way that you can always
manual. safely control your vehicle. In case of doubt, stop
at a suitable location and operate your device while
These instructions are intended to familiarise you with
the vehicle is parked. As the driver, you must not use
important functions.
the applications that will distract you from traffic
Ÿ For best results, please read the user manual
(depending on the scope of functions of the device,
carefully and completely before using the car audio
e.g. viewing videos, searching for a destination)
system.
(Navigation equipped radios and other
Ÿ Always keep the user manual accessible to all users.
downloaded application)
Ÿ Always handover the car audio system to any third
party along with these instructions Ÿ Follow driving recommendations during the
Ÿ In addition, observe the instructions of the devices route guidance only if you are not violating any
used in combination with this car audio system traffic regulations: Traffic signs and traffic
regulations always have priority over driving
Symbols used recommendations.
Below are the symbols used in this user manual, please
go through them carefully: Ÿ Always listen at moderate volume to protect your
hearing and to be able to hear warning signals (e.g.
CAUTION: police sirens and other external alerts while driving).
Warns about possibilities of any injuries that During mute phases (e.g. when changing the audio
might occur. source), changing the volume is not advisable. Do
DANGER: not increase the volume during this mute phase
Warns about damages to the DVD/CD drive
(Not applicable to all Series 900 Model)
Road safety
Observe the following notes about road safety:
LOUD VOLUME: To avoid any injury or damage to yourself, your car and
Warns about high volume others, please make sure to do as following. Observe
the following note to protect yourself against injuries:
ü Identi es a sequencing step
Ÿ Identi es a listing Ÿ Before using this unit, please read all related
instructions carefully.
General Warning
To avoid any injury or damage to yourself, your car and Ÿ Any damage to this unit caused by improper
others, please make sure to do as following. Observe operations will void the warranty.
the following note to protect yourself against injuries:
Ÿ Please do not watch videos or use other Apps while
Ÿ Do o not modify or open the device. Do not do any the vehicle is in motion. Doing so, is a Safety
unauthorised modi cation to the device. In case you violation. To watch videos or use Apps, please
need any assistance, please visit the nearest service ensure that the vehicle is in parked mode with
centre. The device should be open by an authorised handbrake activated.
person only.
Ÿ The below-listed applications while driving the
Ÿ Use as Directed: this car audio system is intended vehicle may divert your attention form the traffic
for installation and operation in a vehicle with 12V situation and may lead to serious accidents:
(negative ground) vehicle system voltage. Observe ¡ Using the navigation feature like entering the

the output limits of the device. Only an authorised destination address

specialist should perform repairs and installation, if ¡ Video playback or watching any kind of video

necessary. ¡ Usage of internet via the browser

¡ Use of connected phone via PhoneLINK

Ÿ Installation Instructions: You may only install the
car audio system yourself if you are experienced in Ÿ You are advised to refrain from any activity which
installing car audios systems, and are very familiar could possibly divert your attention while driving.

04
Safety notes

The best way to use these applications is when your Installation

vehicle is parked in a safe location. Avoid installing the unit where it would be subject to
Ÿ To avoid short circuit, please do not dispose the unit high temperature, such as from direct sunlight, or from
into the water and please do not place or leave any hot air from the vents, or where it would be subject to
kind of metal object (such as a coin or metal tools) in dust, dirt or excessive vibration.
the unit. Din Front/Rear-mount
This unit can be installed either from “Front”
Ÿ Please operate the unit as per this Manual, it is not
(conventional 2DIN (Front-mount) or “Rear”(2DIN Rear-
allowed to open the unit for maintenance; In case if
mount) installation, utilizing threaded screw holes at
maintenance is required, please seek professional
the sides of the unit chassis. For details, refer to the
help.
following illustrated installation methods.
Ÿ After the car engine is off, please do not use the car Installation Opening
audio for a long time, otherwise, the battery could This unit can be installed in any dashboard having an
be drained. opening as shown below:
Instructions to read this User Manual Attention: Installation Tips
Illustrations are used in this manual to explain 1.This player should be installed by professional
operations and precautions. The illustrations used in technician.
this manual are only for reference, please take the 2. please read the instruction and operation of the
actual unit as standard. device carefully before installing.
3. Make sure to connect all other wires before power
Marks connection.
Mark for important preventive measures; please 4. To avoid short circuit, please make sure all exposed
read carefully to prevent any injury. wire are insulated.
5. Please ensure that all wires are securely bundled
Mark for a special explanation, auxiliary
after installation.
interpretation, imitation and references.
6. Please make connection to the player accordingly to
Mark for additional information to operate this this instruction manual. Wrong connection may cause
unit. When there is any difference between the damage.
Manual and the actual unit, please take the
actual unit as standard.

Cleaning notes
Ÿ Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care products may
contain ingredients that will damage the surface &
screen of the audio system.
Ÿ Use only a dry or slightly moistened cloth for
cleaning the audio system.

Disposal notes
Ÿ Do not dispose of your old unit/batteries in the
household trash.
Ÿ Use the return and collection systems available to
dispose of the old device.

05
Placing the device in operation Radio

Operation Radio
Switching ON / OFF In the main menu, touch the [Radio] icon. The radio
Ÿ To Switching ON / OFF with the rotary/push button. page menu is displayed.
Ÿ To switch-OFF, hold the rotary/push button pressed
for more than 2 seconds..
Switch ON / OFF via vehicle ignition
If the car audio system is connected with the vehicle
ignition, turning OFF the ignition and removing the key
automatically switched OFF the audio system.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (mute) to 40
(maximum).
Ÿ Turn the rotary/push button to change volume.

Muting the car audio system (Mute)

Select FM / AM band
Up to 30 stations can be stored under the FM band and
Brie y press the rotary/push button to mute the device
AM band.
or to resume at previous volume.
Ÿ Touch the [ ] button to c ycle bet ween
Main menu (Home) FM1/FM2/FM3/AM1/AM2 bands.
In the main menu, touch the icons on the touchscreen
to call up the different sources and operating modes. Tuning into a station
Ÿ In the current source, touch the [ ] button. The main Tuning into stations manually
menu is displayed. Brie y touch the [ I◄◄ ] or [ ►►I ] button once or
several times to change the frequency in small
Display ON / OFF increments.
In the main menu, touch [Display Off] to turn off
screen display, the audio output will continue. Touch Station seek tuning
anywhere on the screen & the display comes back on. Touch the [ I◄◄ ] or [ ►►I ] button for approx. 2
seconds to start station seek tuning. The radio
Wallpaper automatically tunes to the next receivable station.
In the main menu, Touch [Wallpaper] button to Storing stations manually
change the background picture. Ÿ Touch [ ] to c ycle between FM1 / FM2 /
Digital Clock FM3 /AM1/AM2 bands.
In the main menu, there is a digital clock. Press any Ÿ Tune to the desired station.
source icon to exit this screen. Ÿ Touch one of the memory buttons [1]-[6] for approx.
2 seconds to store the current station at that
particular location. The station is stored.
Storing stations automatically (Travel store)
Ÿ Touch [ ] to store the stations to [1] to [6] of
FM1~FM3(or AM1/AM2) automatically.
Scanning stations
Ÿ Touch the [ PS ] button to listen the preset stations
[1] to [6] FM1~FM3(or AM1/AM2) for few seconds.
Directly enter frequency
Ÿ Touch [ ] button then input desired station
frequency and touch [ OK ] button.
Note:
The gures used in these instructions are intended to Adjusting the seek tuning sensitivity
facilitate explanation. Some details may vary in your The seek tuning sensitivity decides whether the
device. automatic station seek tuning nds only strong
stations or also weaker stations that may have some
static.

06
Radio

Ÿ Touch [ LOC ] button to adjust the sensitivity of Update the clock via RDS
station seek tuning. CT SYNC function is set to ON when the car audio
If LOC is displayed, only stations with a strong signal are system is tuned into a RDS capable station, The station
found during seek tuning. clock time will be synchronized to the device within
If LOC is not displayed, stations with a strong and weak few minutes.
signal are found during seek tuning. Ÿ In FM band, press [ ] button into the RDS menu.
Ÿ Press [ CT SYNC ] button to switch the CT SYNC
Stereo/Mono switching
function on/off.
Change FM stereo to Mono. It can reduce static when
the signal is weak. Select program type
Ÿ Touch [ ] button to switch Stereo/Mono. You can select a program type with the PTY function to
Ÿ In Stereo mode, The ST is displayed in white. search for stations of a particular genre, for example,
Ÿ In Mono mode, The ST is not displayed stations that broadcast rock music, sporting events or
news.
RDS function Ÿ In FM mode, touch [ ] button to access the RDS
Many FM stations broadcast an RDS (Radio Data menu.
System) signal in addition to their program in the Ÿ For PTY, touch [ ] button to display the program
Europe reception area that allows additional functions, types.
such as the display of the station name. Ÿ Scroll through the list with [▲] / [▼] and touch on
the desired program type to start PTY seek tuning.

Switching AF(Alternate frequencies)

function ON / OFF
If the AF function is activated, the car audio system
automatically tunes into the best receivable frequency
for the station that is currently set.
Ÿ In FM band, touch [ ] button to access RDS menu.
Ÿ Touch [ AF ] button to switch the AF function on/off.
Ÿ If the AF function is switched on, AF is displayed in
white.

Switching the TA (Travel Announcement)

function ON / OFF
If the TA function is activated, the car audio system
automatically receives travel announcements as and
when they're available.
Ÿ Touch [TA ] button to switch the TA function on/off.
Ÿ If the TA function is switched on, TA is displayed in
white.

07
 USB

USB media playback

Basic information
The car audio system can be used to play MP3 les as
well as MP3 or WMA les on USB data carriers.
In addition, you can view movies and images from USB
data carriers on the display or a connected monitor.
For safety reasons, the playback of movies and images
on the integrated monitor is allowed only while the
vehicle is parked and the hand brake is engaged. The
"BRAKE" cable must be connected with the hand brake
connection of the vehicle (see Connection diagram at [△]Scroll up through the list page by page.
the end of these instructions). Movie playback on an [▽] Scroll down through the list page by page
external monitor in the rear is possible while driving. [ ] Return to playback page.
Notes: After choosing a title, playback menu is displayed.
Blaupunkt cannot guarantee awless function of copy-
protected material USB data carriers available in the
market.
Note following information when preparing a MP3/
WMA data carrier: (max. 32GB)
Ÿ Naming of tracks and directories:
Ø Max. 32 characters without the le extension
".mp3" or ".wma" ( more characters reduces the
number of tracks and folders that the car audio
system can recognize)
Ÿ USB format/ le system: mass storage device / FAT /
FAT16 / FAT32 (max. 32GB) [ ] Display the folder/ le list.
Ÿ File extension of audio les [ ►I ] Next le.
Ø .MP3 for MP3 les
[ I◄ ] Previous le.
Ø .WMA for WMA les
[ II / ► ] Pause playback and continue playback.
Connecting a USB data carrier [ ] Repeat All les.
Ÿ Insert the USB data carrier in the USB slot. [ ] Repeat the same les.
Ÿ The device automatically switches to USB mode. The [ ] Repeat all les of current folder.
data is read, and playback starts with the rst media [ ] Back to the play list after nishing last le.
le recognized by the device. [ ] Playback in random.
Removing the USB data carrier [ ] Display equalizer.
Ÿ Turn off the car audio system or switch to another
Video playback from USB
source
Ÿ Insert the data carrier to the USB1 or USB2 slot
Ÿ Remove the USB data carrier
playback starts.
Audio playback from USB Ÿ If the data carrier already is in the device, select the
The principles of audio playback (MP3/WMA) from data USB1/USB2 source from the main menu.
carriers are identical for all sources. Ÿ If playback does not start with video playback, Press
Ÿ Select the desired source via the main menu. The [ ] button change to the playlist then touch [ ]
device changes to the desired source and playback button to display all the folders of the data carrier,
starts. then select the desired le to play.
Ÿ If the playback does not start Note:
Ÿ Press the [ ] button to display folder list. If you select a movie, playback starts. During movie
Ÿ Press the [ ] button to display all audio folders in playback, the playback menu is hidden.
the data carrier. Ÿ Brie y touch the touchscreen once to display the
playback menu again. The playback menu is
displayed at the bottom of the screen.

08
USB Bluetooth

Bluetooth mode
Bluetooth® function allows pairing cell phones & BT
equipped media playback devices with the car audio
system.
Once you pair a cell phone with the car audio system,
you can make phone calls with the built-in hands-free
function. You can access the list of dialed numbers and
the phone book of the registered cell phone after
selecting “Sync” option.
If the connected Bluetooth® device supports the
functions like A2DP and AVRCP, you can play music via
[ ] Display the folder/ le list. the car audio system and control playback. During a
[ ►I ] Next video. call, music playback is interrupted and resumes again
[ I◄ ] Previous video. after the call.
[ II / ► ] Pause playback and continue playback.
[ ] Change repeat mode: Repeat One/Repeat If a cell phone is paired via Bluetooth® and a call is
Directory/Repeat All/Repeat Off. received during playback, the source playback is
[ ] Repeat A to B. interrupted, and the call menu is displayed.
[ ] Adjust brightness level of screen. Bluetooth pairing
Ÿ Select the Bluetooth item and search the Bluetooth
Image playback from USB device on your phone. Select “NEWPORT BEACH
Ÿ Insert the data carrier into the USB1 or USB2 slot and
370” and input password “0000” if it needs a
it should display all images. password. The BT icon will be displayed once
Ÿ If the data carrier is already in the device, select the
successfully paired.
USB1/USB2 source from the main menu.
Ÿ If it does not display images, touch [ ] button to Connection status
change to the playlist options and then touch [ ] Ÿ If a mobile phone/device is connected with the car
button to display all the folders of the data carrier, audio system, the Bluetooth® icon is displayed at the
then select the desired le to display top left corner of the display in all audio/video
sources.
Bluetooth PHONE mode
Ÿ Select In the main menu, press [ Phone ], the
following menu appears.

[ ►I ] Next image.
[ I◄ ] Previous image.
[ II / ► ] Pause playback and continue playback.
[ ] Rotate image.
[ ] Phantom play. Ÿ Press the [ ] button to disconnect the Bluetooth
[ ] Zoom in/Zoom out. connection.
Ÿ Press the [ ] button to reconnect the Bluetooth
[ ] Display the folder/ le list.
connection.
Ÿ When the device is in range, the connection is
established & the menu for the device is displayed.
Ÿ Enter a phone number with the keypad & press the
[ ] button.
- Or -

09
Bluetooth

Ÿ Brie y touch a contact / number via the caller list or Ÿ [ ] Dialed out number list.
phone book in the pop-up window. If there's an Ÿ [ ] Incoming call list.
incoming call, the call menu is displayed. Ÿ [ ] Missed call list.
Ÿ [ ] Dialing page. Ÿ [ ] Sync call records.
Ÿ [ ] Dialing log page. Ÿ [△] Scroll up through the list page by page.
Ÿ [ ] Phone book page. Ÿ [▽] Scroll down through the list page by page.
Ÿ [ ] Answer/dial out a call.
Ÿ [ ] Reject/cancel a call. Bluetooth playback mode
Ÿ [ ] transfer back to the phone. Select In the main menu, press [ BT Music], the
following menu appears.
Phone book
Ÿ Press [ ] . The following menu appears.
Ÿ Brie y touch [ ], the keypad will pop up. Input the
letter to search for a contact

[ ▶I ] Next track.
[ I◀ ] Previous track.
[ II / ▶] Pause playback and resume playback.

Note:
Phone book sync: To be able to access the phone Log /
phone book of a connected mobile phone / device, you
must allow sync phone book on your mobile phone.
This car audio system supports up to 1024 numbers.
Phone Log / Phone book download: Once device is
paired with the car radio & sync option is selected the
car radio begins downloading the phone log and
phone book. Should this be interrupted, the download
will begin the next time the device is within range &
connected to the car radio.
Phone Log
Press [ ]. The following menu appears.

10
External Audio / Video Sources Sound Settings

External audio / video sources Sound settings

AV-IN Equalizer
AV-IN input is located at the rear of the radio. You can adjust the equalizer for all sources.
Ÿ In the main menu or on the control bar of the current
Ÿ Select [AV IN] on HOME screen. The display shows
the audio or video playback of this AV source. audio source, press the [ EQ ] or [ ] button. The
equalizer menu is displayed

Ÿ
Rear Camera Input Ÿ Select a preset equalizer via the buttons.
This device features a video input at the rear of the
-Or-
device for connecting a rear-view camera that is
Ÿ Press the [ User ] button to set the levels of the
available as an option (sold separately). If a rear-view
available frequency bands according to your
camera is connected, the image is displayed on the
preferences.
screen, when the reverse gear is engaged.
Note:
Ÿ Connect REVERSE wire to reverse lamp power With the [ ] button, you can reset the customized
supply to detect when the reverse gear is engaged. setting and start over .

External monitor Audio distribution (fader/balance)

This device features a video out for connecting an You can adjust the sound distribution in the vehicle for
external monitor for passengers in the rear seat (see all sources.
Connection diagram at the end of these instructions). Ÿ Adjust fader & balance with [ ]
Ÿ Select the desired source via the main menu and
Ÿ Reset fader and balance to 0 with [ ]
start movie playback, e.g. from a USB.
Ÿ Turn on the [ Loud ] button to increase bass at low
The image is displayed on the rear monitor. volume.

11
 General Settings

General settings Others

In the settings menu, you can adjust the general Touch [ ] button and the other menu options are
settings for the different functions of the device to suit displayed.
your requirements.
Ÿ In the main menu, press the [Settings] button. The
settings menu is displayed.

In this menu, following settings are possible:

Ÿ Beep: Switch beep sound on/off.
Ÿ Parking: Turn parking detect on/off.
Ÿ Rear view camera mirror: Invert rear camera
In this menu, following settings are possible: image.
-Set date. Ÿ Gain level: Setting USB / BT / AUX IN / AV IN source
-Set time. output level.
-Use 24-hour format or 12 hour format. Ÿ Display settings: Adjust Brightness / Contrast /
Saturation / Hue.
Steering Wheel Control Ÿ Restore factory settings: Reset to factory settings.
(Note: All information stored in the device will be
Touch [ ] button the SWC menu is displayed.
lost)

The buttons of the connected steering wheel control

can be con gured here.

Software version：
Touch [ ] button to display the current software
version

12
PhoneLINK Warranty | Service

PhoneLINK* Useful information

New PhoneLINK feature allows you to connect your
Android Smartphone to Blaupunkt 2 Din Touchscreen Warranty
radio using your mobile phone data cable. We provide a 1 year manufacturer's warranty for
Enjoy all functions & applications on your Android products bought within the India. For devices
phone via the in-dash radio. purchased outside the India, the warranty terms issued
by our respective responsible domestic agency is valid.
— View your smart phone images on the radio display
— Play music from your phone Register ONLINE within 15 days of PURCHASE to
— Navigate without touching your smart phone activate WARRANTY.
— Access your phone contacts & apps The procedure to activate the warranty is given below;
— Check your Email / Messages

* Check compatibility with your Android phone before

purchase.
INSTRUCTION CARD
Please turn to the next page for instructions to turn on for Warranty Registration.
debugging on your phone.
OR
Check the below given video link for instructions;
https://youtu.be/nOM1WDjjAGQ
Please activate your 1 Year warranty within
15 days of purchase. Warranty can not be claimed if not
registered online within 15 days from the date of purchase.
To activate your e-warranty, please follow below guide

Step 1. Please SMS <serial number> to 07760962759

Step 2. In response to the sent SMS, you should
receive back a link via SMS, please Click on it
Step 3. Complete a simple form to register
your product & activate e-warranty.
E-user manual is available at www.blaupunktcar.in
and upon completion of registration.

Should you require further assistance,

please call: Customer Support 1800 209 6820 OR
Email us: [email protected]
Note: WARRANTY not applicable if bought from third party online portals.

Service
If your device should need service or to get more
information about our local authorised service center,
you can email us at
Email: [email protected]
OR
Call 1800 209 6820

13
14
Connection diagram Device Parameters

Attention:
1. Please make sure “B+”and ”ACC” pin location are correct before making connection. These two pins maybe
different in different cars. Wrong connections of these two pins will burn the fuse.
2. ”Parking”wire must be connected to “ground” in order to active the video function
3. This player can only be used by the 12V DC cathode grounding electrical system.
4. Don't connect the terminals of the car battery until the player is absolutely with well erection joint.
5. Please make sure to connect the yellow wire to the positive of the battery (+).
6. When change the fuse. Please make sure the speci cations are same.
7. Using good quality speaker with 4-8 ohm can result in the best effect of the equipment.

Appendix 1
Radio and Audio parameters:
FM AM MP3/WMA
Tuning range 87.5~108.0MHz 522~1620KHz
Sensitivity 4uV(S/N=30dB) 63uV(S/N=20dB)
S/N ratio 50 dB 45 dB 60 dB
Stereo separation >25 dB 50dB
Freq. Response 40Hz~12KHz 100Hz~2KHz 20Hz~16KHz

15
 Supported Audio & Video format

Audio
Audio format Pro le Max Bitrate Max Sample Rate
MP3 All 320kbps 48000
WMA Standard/Pro 384kbps 48000
OGG Q1 / Q10 500kbps 48000
FLAC Lever 0 - Lever 10 1.60Mbps 48000
APE 950kbps 48000
AAC 448kbps 48000
AC3 Ac3 only 132kbps 48000
ATRA 132kbps 44100
DTS Dts only 3.84Mbps 48000
Video
Video Format Resolution Video Decode
1280x720 M PEG4/XVID,DIVX4/DIVX5/MSMP EG4V3,MPEG2,RV1.0/RV2.0/RVG2,RV3.0/RV4.0/R
MKV 720x480 H264/AVC
640x480 DIVX3
1280x720 M PEG4/XVID,DIVX4/DIVX5/MSMP EG4V3,H 263,M JP EG
AV I 720x480 H264/AVC
640x480 DIVX3,
1280x720 M PEG4/XVID,DIVX4/DIVX5/MSMP EG4V3,M P EG2,M P EG 1, H263,MJ P EG,
MOV/M P4 720x480 H264/AVC
640x480 DIVX3,
1280x720 M PEG2
TS
720x480 H264/AVC
1280x720 M PEG4/XVID,DIVX4/DIVX5/MSMP EG4V3,M P EG2,M P EG 1, H263,MJ P EG,
AS F 720x480 H264/AVC
640x480 DIVX3
1280x720 H263
FLV
720x480 H264/AVC
1280x720 M PEG4/XVID,
PM P
720x480 H264/AVC
RMVB 1280x720 RV1.0/RV2.0/RVG2,RV3.0/RV4.0/RV8/RV9
MPG/VOB 1280x720 M PEG2,M PEG1
1280x720 M PEG4/XVID,
WMV
720x480 DIVX4/DIVX5/MSM PEG4V3,MPE G2

Note:WMV1,WMV2,WMV3,VC1,VP6,MSMPEG-41/2,etc.
Video decoder does not support.

Photo
Photo format Max resolution Pro le
JP EG Unlimited Baseline
BMP /PNG 2.5M pixels ALL
GIF 2.5M pixels 89a/87A

BPIN Private Limited

47, Atlanta Society, Nariman Point, Mumbai‐ 400 021. Maharashtra. India. [email protected] | www.blaupunktcar.in