Scribd
Upload
45 views1 page

TDS-Slab ASTM - 48x50 13.07.2022

The document provides a technical data sheet for ROCKINSUL slab insulation, made from stone wool and free from asbestos, with a nominal density of 48 kg/m3. It outlines key properties such as thermal conductivity, dimensions, compressive resistance, and compliance with ASTM C612 standards. Additional characteristics include a maximum service temperature of 750°C, resistance to fungi, and no corrosiveness to steel.

Uploaded by

procure.tcel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views1 page

TDS-Slab ASTM - 48x50 13.07.2022

The document provides a technical data sheet for ROCKINSUL slab insulation, made from stone wool and free from asbestos, with a nominal density of 48 kg/m3. It outlines key properties such as thermal conductivity, dimensions, compressive resistance, and compliance with ASTM C612 standards. Additional characteristics include a maximum service temperature of 750°C, resistance to fungi, and no corrosiveness to steel.

Uploaded by

procure.tcel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

ROCKINSUL SLAB INSULATION

Material Composition: Stone wool slab insulation is manufactured from mineral


Substance such as rock, processed from a molten state
into fibrous form with binder. Free from asbestos.
Nominal Density: 48 kg/m3 (±10%)
Thermal conductivity As per ASTM STD C612

Facing: Unface
Dimension
(a) Length: 1.2 m (±12.7 mm)
(b) Width: 0.60 m (± 6.4 mm)
(c) Thickness: 50 (- 3.2 mm, + 6.4 mm)

Compressive Resistance: Min. 1.2 kPa


Maximum Service temperature: 750 oC
Surface Burning Characteristics

(a) Flame Spread index: < 25

(b) Smoke developed index: < 50

Linear shrinkage: Max. 2%

Alkalinity pH: 7 - 10

Water vapor sorption: Max. 5%

Corrosiveness to Steel: No Corrosion

Fungi Resistance: Do not promote fungi growth

Non-fibrous (shot) Content: Less than 25%

Stress Corrosion to Austenitic Stainless Steel: No Cracking observed

Standard Compliance: ASTM C 612

All inf ormation and data mentioned in this technic al data sheet are based on tests perf ormed in th e
Laboratory. Nothing herein to be construed as a warranty or representation and we recommend, However, that all potential
users of the product make their own actual tests prior to using it on industrial scale

Rockwool India Pvt. Ltd.


Email: [email protected],
www.rockwoolindia.com

You might also like