Start here

Stylus
1 Connect and charge
Note: Don’t be surprised if your handheld doesn’t respond at all to button presses
or taps before you fully charge it. This is normal.
2 Set up
a. Press the power button.
b. Remove the stylus.
Stylus

a. Connect the sync cable to your handheld and to the USB port on Power button
c. Follow the onscreen instructions
your computer.
to set up your handheld.
b. Plug the AC charger into an outlet and connect it to the handheld.
Tip: Take the Quick Tour to
c. Charge for three hours. Be sure to fully charge your handheld before learn more about the great features
going on to the next step. of your Palm T|X handheld.
USB sync cable Flip cover

USB

Palm® T|X handheld

Software installation CD
AC charger

Upgraders
Before going to step 1, synchronize your current handheld with your computer so
that the information is up-to-date. Sync cable
Be sure to install the new software from the CD as described in step 3 below;
otherwise, your new handheld will not work correctly.
For more information on upgrading, go to www.palm.com/support. AC charger Problems? See Troubleshooting below.

3 Install software
To install Palm® Desktop software and other important software, insert
the CD into your computer’s CD drive.
Get answers, learn more
Take the tutorial
Look for these great features
On your computer
Palm Desktop software. Enter info in Palm Desktop software and
it shows up on your handheld the next time you synchronize.
Windows: Mac:
Follow the installation instructions Double-click the CD icon, Quick Install (Windows only). Install applications on your
that appear on your computer and then double-click handheld the next time you synchronize.
screen. PalmSoftware.pkg.
Quickly learn to use your
handheld. Insert the installation Send To Handheld droplet (Mac only). Install applications on
CD into your computer and click and copy other types of files to your handheld the next time
here for an interactive tutorial. you synchronize.

On your handheld
Wi-Fi® technology. Set up wireless connections to a Wi-Fi
network to browse the web, send and receive email messages,
Get more information and synchronize with your computer.
Tip: During the installation process on a Windows computer, you can Open Palm Desktop software on
select to synchronize with Outlook. your computer and click Help. Bluetooth® wireless technology. Set up a connection with your
computer to synchronize wirelessly (computer must be enabled
Upgraders with Bluetooth technology), or set up a connection with your
Click here for detailed handheld GSM mobile phone to browse the web or send and receive email
To switch from synchronizing with Palm Desktop software and SMS messages. (Requires phone enabled with Bluetooth
and desktop software help.
to Outlook, select Change your synchronization method technology, data services, and an ISP, all sold separately.)
at the end of the installation process.
Click Online Support for the latest VersaMail® application. Send, receive, and manage email
software updates and answers to messages wirelessly using your handheld’s wireless capabilities
Problems? See Troubleshooting below. frequently asked questions. or by synchronizing with your Windows computer.

Troubleshooting
Support information is available also at www.palm.com/support Synchronization does not begin
Be sure the sync cable is plugged into your handheld and into a USB port on your computer.
Your handheld does not turn on, or does not respond when you tap it
1. Try turning it on by pressing one of the quick buttons on the front panel. Check your handheld:
Check your computer:
2. Do a soft reset. Use the stylus to gently press the reset button inside the hole 1. Tap Home , and then tap HotSync in Applications.
Windows:
on the back of the handheld.
1. Make sure the HotSync® Manager icon appears in the group of icons in the lower- 2. In the HotSync application, verify the following:
3. Make sure the AC charger is fully connected to the handheld and to a working
right part of your screen. – Local is highlighted. If it isn’t highlighted, tap Local.
outlet. Charge for another three full hours.
HotSync Manager icon
– The term Cradle/Cable appears. If not,
tap the pick list, and then tap Cradle/Cable.
Palm Desktop Installer does not start when you put the CD into the drive
3. Tap the HotSync icon on the screen.
Windows: If not:
1. Click the Start button and select Run. a. Click the Start button and select Programs. Local
2. Click Browse to locate the drive containing the CD that came with b. Select Palm, and then select HotSync Manager. HotSync icon
your Palm T|X handheld.
2. Check the connection type: Cradle/Cable
3. Double-click autorun.exe on the CD.
a. Disconnect and then reconnect the sync cable.
Mac:
b. Make sure there is a checkmark next to Local USB.
1. Double-click the CD icon on the Mac desktop. If there is none, click Local USB.
2. Double-click PalmSoftware.pkg.
Upgraders
Mac:
1. Make sure the HotSync Manager is enabled: Did you load any third-party applications on your previous handheld? You’ll
have to update them if they are not compatible with your new handheld.
a. Double-click the HotSync Manager icon in the Palm folder.
If any of the following symptoms occur on your new handheld after you
b. From the HotSync Controls tab, click Enabled. synchronize, remove these applications and contact the vendor for updated
2. Make sure the USB connection is working: versions: handheld freezes or resets when you open an application, slow
a. Disconnect and then reconnect the sync cable. performance, unusual screen display, difficulties using handheld features,
b. Restart your computer. uneven sound quality.

Read This First Poster

Cyan Magenta

Yellow Black

PMS 152c

MATERIAL: SPCO Matt (sheet fed) 128g

FINISH SIZE: 16.5”x 16.5”
Downloaded from www.Manualslib.com manuals search engine
 Headphone Stylus
jack
IR (infrared) port

Expansion Power button

card slot Press to turn Palm, Inc.
handheld on/off. 950 W Maude Ave.
Speaker
Sunnyvale, CA 94085
(on back) Documents U.S.A.
VersaMail® Copyright
© 2005 Palm, Inc. All rights reserved.
Home Palm, Palm Powered, HotSync, and VersaMail are among the trademarks or registered trademarks owned by or
Web licensed to Palm, Inc. Wi-Fi is a registered certification mark of the Wi-Fi Alliance. All other brand and product
Press to turn on names are or may be trademarks of, and are used to identify products or services of, their respective owners.
Media
handheld and Disclaimer and Limitation of Liability
open the web Palm, Inc. assumes no responsibility for any damage or loss resulting from the use of this guide.
Status bar browser. Palm, Inc. assumes no responsibility for any loss or claims by third parties which may arise through use of this
(See below.) software. Palm, Inc. assumes no responsibility for any damage or loss caused by deletion of data as a result of
Contacts malfunction, dead battery, or repairs. Be sure to make backup copies of all important data on other media to
Home Press to turn on protect against data loss.
Press to turn on handheld and IMPORTANT
handheld and open Contacts. Please read the End User Software License Agreement with this product before using the accompanying
open Favorites. software program(s). Using any part of the software indicates that you accept the terms of the End User
Multi-connector Software License Agreement.
Calendar Connect the sync cable Software Download Available
Press to turn on to synchronize, or connect Palm® Desktop software is available on CD. Check www.palm.com/support for updates and new versions of
handheld and 5-way navigator the AC charger to charge the software.
open Calendar. your handheld. Agency Compliance Information
Product regulatory and compliance information can be found in the User Guide at www.palm.com/TX-userguide
Sync button
Find Input
Menu Screen rotation
System
info
Alert Bluetooth®
controls
Full-screen writing
Wi-Fi® controls
PN: 406-10455-00
Read This First

Read This First Poster

Cyan Magenta

Yellow Black

PMS 152c
Downloaded from www.Manualslib.com manuals search engine
MATERIAL: SPCO Matt (sheet fed) 128g