AD Series
Simple Weighing Scale
OWNER’S MANUAL
CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
OPERATIONS 8
1. General Weighing 8
2. Weighing with Tare 8
3. Hold Function 9
PRINT(ADH Series) 10
ERROR MESSAGE 10
SPECIFICATIONS(AD Series) 11
SPECIFICATIONS(ADH Series) 11
PRECAUTIONS
Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 30 minutes before operations.
If the scale is not properly
leveled, please adjust the
4 legs at the bottom of the
scale(turn legs clockwise or
counterclockwise) so as to
center the bubble of the
leveling gauge inside the
indicated circle.
Leveling gauge
Place the scale on a flat and stable Do not subject the scale to sudden
surface. temperature changes.
Do not subject the platter to sudden This scale must be installed in a dry Keep the scale away from strong EMI noises may cause incorrect weight
shocks. and liquid free environment. readings.
4 5
AD 2.5, 5, 10, 25kg
PREFACE
Thank you for purchasing our CAS AD Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these kg
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the AD Series.
Please keep it handy for future reference.
NAMES AND FUNCTIONS ADH Series
OVERALL VIEW
kg
PLATTER
DISPLAY
KEYBOARD
LEVELING
GAUGE
ADJUSTING FUNCTION
BOLT
KEYS FUNCTIONS
ON
OFF Turns the display ON or OFF.
DISPLAY & KEYBOARD
AD 3, 6, 15, 30kg ZERO Used to correct the ZERO point.
Used to enter a TARE weight.
TARE
Used to remove a TARE weight.
kg
HOLD When the weight is not stable, display will show the average weight
III
for 4 seconds.
No function key.
*
6 7
OPERATIONS
Turn on the display by pressing ON/OFF key.
Then the display will show all the segments and count up "0" to "9".
When you turn on the display, make sure that platter is empty.
The display indicates if the scale is at ZERO or if there is a TARE entered
into the scale by way of a ZERO and NET lamps. Remove the commodity from Remove the container from Press TARE key.
When the display is not zero though there is nothing on the platter, press the platter. the platter.
the ZERO key.
In case of AD-2.5, AD-05H the display shows zero state as 0.0.
3. Hold Function (AD 2.5, 5, 10, 25kg, ADH Series)
Display will show the
1. General Weighing “HOLD”.
Wait until display should be zero.
The display will show the
average weight 10 times.
When the weight is not
stable, press the HOLD key.
Place the commodity on Remove the commodity from
the platter. the platter.
2. Weighing with Tare
Remove the commodity
from the platter.
Place the container on the Press TARE key. Place the commodity on
platter. the container.
8 9
PRINT(ADH Series) SPECIFICATIONS(AD Series)
If you want to use print function, please contact CAS dealer. MODEL AD-1
1) Place a commodity on the platter, and press the HOLD key. The display shows 3 0.001kg 6 0.002kg 15 0.005kg 30 0.010kg
“P-on” and the weight is printed. CAPACITY
2.5 0.5g 5 0.001kg 10 0.002kg 25 0.005kg
2) Remove the commodity from the platter, then the display shows zero state and
zero lamp should be ON. DISPLAY VFD, 5 DIGIT
3) If you weigh another commodity, the weight is printed automatically. DISPLAY DESIGNATORS ZERO, NET
4) If you do not want to print anymore, press the HOLD key when you place a -3.000kg -6.000kg -9.995kg -9.990kg
commodity on the platter. Then the total report is printed and the display MAXIMUM TARE
-999.5g -5.000kg -9.998kg -9.995kg
shows “P-off”.
TEMPERATURE RANGE 10°C 40°C
POWER SOURCE AC 110V/220V/240V, 50 /60Hz
POWER CONSUMPTION APPROX. 10W
ERROR MESSAGES
PLATTER SIZE (mm) 340(W) 215(D)
To help the customer’s understanding, this scale warns the error messages PRODUCT SIZE (mm) 350(W) 325(D) 105(H)
properly. Please refer to error table.
PRODUCT WEIGHT 4.7kg
ERROR REASONS SOLUTIONS
Err 1 An error of the initial zero range Empty the platter
Err 10 A failure of the analog module Turn off the power and turn it on SPECIFICATIONS(ADH Series)
Err 11 A failure of the digital module Call your CAS dealer
Err 12 Condition codes are broken Call your CAS dealer for span calibration MODEL AD-05H AD-10H AD-20H
Err 20 Interface error Check the cable MAX. CAPACITY 5kg 10kg 20kg
MIN. CAPACITY 0.5g 1g 2g
TARE SUBTRACTION -4999.5g -9999g -19998g
DISPLAY VFD, 5 DIGIT
DISPLAY DESIGNATORS ZERO, NET
POWER SOURCE AC 220V, 60Hz
POWER CONSUMPTION 10 W
TEMPERATURE RANGE 10°C 40°C
PLATTER SIZE (mm) 340(W) 215(D)
PRODUCT SIZE (mm) 350(W) 325(D) 105(H)
PRODUCT WEIGHT 4.7kg
10 11
